From: Andre Przywara <andre.przywara@arm.com>
To: Chen-Yu Tsai <wens@csie.org>,
Samuel Holland <samuel@sholland.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Bin Liu <b-liu@ti.com>
Cc: Icenowy Zheng <uwu@icenowy.me>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
devicetree@vger.kernel.org, soc@kernel.org,
linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev
Subject: [PATCH v5 08/11] ARM: dts: suniv: add device tree for PopStick v1.1
Date: Wed, 11 Jan 2023 01:53:29 +0000 [thread overview]
Message-ID: <20230111015332.172021-9-andre.przywara@arm.com> (raw)
In-Reply-To: <20230111015332.172021-1-andre.przywara@arm.com>
From: Icenowy Zheng <uwu@icenowy.me>
PopStick is a minimal Allwinner F1C200s dongle, with its USB controller
wired to a USB Type-A plug, a SD slot and a SPI NAND flash on board, and
an on-board CH340 USB-UART converted connected to F1C200s's UART0.
Add a device tree for it. As F1C200s is just F1C100s with a different
DRAM chip co-packaged, directly use F1C100s DTSI here.
This commit covers the v1.1 version of this board, which is now shipped.
v1.0 is some internal sample that have not been shipped at all.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
arch/arm/boot/dts/Makefile | 3 +-
.../boot/dts/suniv-f1c200s-popstick-v1.1.dts | 81 +++++++++++++++++++
2 files changed, 83 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/suniv-f1c200s-popstick-v1.1.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d08a3c450ce72..b100053182d35 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1399,7 +1399,8 @@ dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
sun9i-a80-cubieboard4.dtb
dtb-$(CONFIG_MACH_SUNIV) += \
- suniv-f1c100s-licheepi-nano.dtb
+ suniv-f1c100s-licheepi-nano.dtb \
+ suniv-f1c200s-popstick-v1.1.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
tegra20-acer-a500-picasso.dtb \
tegra20-asus-tf101.dtb \
diff --git a/arch/arm/boot/dts/suniv-f1c200s-popstick-v1.1.dts b/arch/arm/boot/dts/suniv-f1c200s-popstick-v1.1.dts
new file mode 100644
index 0000000000000..184c245041a6e
--- /dev/null
+++ b/arch/arm/boot/dts/suniv-f1c200s-popstick-v1.1.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Popcorn Computer PopStick v1.1";
+ compatible = "sourceparts,popstick-v1.1", "sourceparts,popstick",
+ "allwinner,suniv-f1c200s", "allwinner,suniv-f1c100s";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 4 6 GPIO_ACTIVE_HIGH>; /* PE6 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ reg_vcc3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&mmc0 {
+ cd-gpios = <&pio 4 3 GPIO_ACTIVE_LOW>; /* PE3 */
+ bus-width = <4>;
+ disable-wp;
+ vmmc-supply = <®_vcc3v3>;
+ status = "okay";
+};
+
+&otg_sram {
+ status = "okay";
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pc_pins>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pe_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-01-11 1:56 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-11 1:53 [PATCH v5 00/11] ARM: suniv: USB and two new boards support Andre Przywara
2023-01-11 1:53 ` [PATCH v5 01/11] dt-bindings: usb: sunxi-musb: add F1C100s MUSB compatible string Andre Przywara
2023-01-11 1:53 ` [PATCH v5 02/11] usb: musb: sunxi: add support for the F1C100s MUSB controller Andre Przywara
2023-01-31 22:52 ` Andre Przywara
2023-02-01 5:06 ` Greg Kroah-Hartman
2023-01-11 1:53 ` [PATCH v5 03/11] usb: musb: sunxi: Introduce config struct Andre Przywara
2023-01-27 20:22 ` Jernej Škrabec
2023-01-11 1:53 ` [PATCH v5 04/11] ARM: dts: suniv: add USB-related device nodes Andre Przywara
2023-01-11 1:53 ` [PATCH v5 05/11] ARM: dts: suniv: licheepi-nano: enable USB Andre Przywara
2023-01-11 1:53 ` [PATCH v5 06/11] dt-bindings: vendor-prefixes: add Source Parts Andre Przywara
2023-01-11 1:53 ` [PATCH v5 07/11] dt-binding: arm: sunxi: add compatible strings for PopStick v1.1 Andre Przywara
2023-01-11 1:53 ` Andre Przywara [this message]
2023-01-11 1:53 ` [PATCH v5 09/11] dt-bindings: vendor-prefixes: add Lctech name Andre Przywara
2023-01-11 1:53 ` [PATCH v5 10/11] dt-bindings: arm: sunxi: add compatible strings for Lctech Pi Andre Przywara
2023-01-11 1:53 ` [PATCH v5 11/11] ARM: dts: suniv: Add Lctech Pi F1C200s devicetree Andre Przywara
2023-01-18 12:11 ` [PATCH v5 00/11] ARM: suniv: USB and two new boards support Andre Przywara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230111015332.172021-9-andre.przywara@arm.com \
--to=andre.przywara@arm.com \
--cc=b-liu@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jernej.skrabec@gmail.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=linux-usb@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=samuel@sholland.org \
--cc=soc@kernel.org \
--cc=uwu@icenowy.me \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).