* [PATCH 2/3] arm64: dts: rockchip: rk3566: Add Radxa Compute Module 3
2023-01-12 10:59 [PATCH 1/3] dt-bindings: dt-bindings: arm: rockchip: Add Radxa Compute Module 3 Jagan Teki
@ 2023-01-12 10:59 ` Jagan Teki
2023-01-12 10:59 ` [PATCH 3/3] arm64: dts: rockchip: rk3566: Add Radxa Compute Module 3 IO Jagan Teki
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: Jagan Teki @ 2023-01-12 10:59 UTC (permalink / raw)
To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski,
Sebastian Reichel
Cc: linux-rockchip, devicetree, linux-arm-kernel, Jagan Teki,
FUKAUMI Naoki
Radxa Compute Module 3(CM3) is one of the modules from a series
System On Module based on the Radxa ROCK 3 series and is compatible
with Raspberry Pi CM4 pinout and form factor.
Specification:
- Rockchip RK3566
- up to 8GB LPDDR4
- up to 128GB high performance eMMC
- Optional wireless LAN, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless,
BT 5.0, BLE with onboard and external antenna.
- Gigabit Ethernet PHY
Radxa CM3 needs to mount on top of this IO board in order to create
complete Radxa CM3 IO board platform.
Since Radxa CM3 is compatible with Raspberry Pi CM4 pinout so it is
possible to mount Radxa CM3 on top of the Rasberry Pi CM4 IO board.
Add support for Radxa CM3.
Co-developed-by: FUKAUMI Naoki <naoki@radxa.com>
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
.../boot/dts/rockchip/rk3566-radxa-cm3.dtsi | 345 ++++++++++++++++++
1 file changed, 345 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
new file mode 100644
index 000000000000..23a85a13311a
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Radxa Limited
+ * Copyright (c) 2022 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ compatible = "radxa,radxa-cm3", "rockchip,rk3566";
+
+ aliases {
+ mmc0 = &sdhci;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ linux,default-trigger = "timer";
+ default-state = "on";
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_led2>;
+ };
+ };
+
+ vcc_sys: vcc-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vcc_1v8: vcc-1v8-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8_p>;
+ };
+
+ vcc_3v3: vcc-3v3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ vcca_1v8: vcca-1v8-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcca_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8_p>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu_npu>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ vdd_cpu: regulator@1c {
+ compatible = "tcs,tcs4525";
+ reg = <0x1c>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1390000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ rk817: pmic@20 {
+ compatible = "rockchip,rk817";
+ reg = <0x20>;
+ #clock-cells = <1>;
+ clock-output-names = "rk817-clkout1", "rk817-clkout2";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc5-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+
+ regulators {
+ vdd_logic: DCDC_REG1 {
+ regulator-name = "vdd_logic";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vdd_gpu_npu: DCDC_REG2 {
+ regulator-name = "vdd_gpu_npu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc3v3_sys: DCDC_REG4 {
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcca1v8_pmu: LDO_REG1 {
+ regulator-name = "vcca1v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdda_0v9: LDO_REG2 {
+ regulator-name = "vdda_0v9";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda0v9_pmu: LDO_REG3 {
+ regulator-name = "vdda0v9_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vccio_acodec: LDO_REG4 {
+ regulator-name = "vccio_acodec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-name = "vccio_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_pmu: LDO_REG6 {
+ regulator-name = "vcc3v3_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_1v8_p: LDO_REG7 {
+ regulator-name = "vcc_1v8_p";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG8 {
+ regulator-name = "vcc1v8_dvp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc2v8_dvp: LDO_REG9 {
+ regulator-name = "vcc2v8_dvp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ };
+ };
+};
+
+&pinctrl {
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ leds {
+ user_led2: user-led2 {
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ pmuio1-supply = <&vcc3v3_pmu>;
+ pmuio2-supply = <&vcc_3v3>;
+ vccio1-supply = <&vccio_acodec>;
+ vccio2-supply = <&vcc_1v8>;
+ vccio3-supply = <&vccio_sd>;
+ vccio4-supply = <&vcc_1v8>;
+ vccio5-supply = <&vcc_3v3>;
+ vccio6-supply = <&vcc_3v3>;
+ vccio7-supply = <&vcc_3v3>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca_1v8>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ mmc-hs200-1_8v;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&usb2phy0 {
+ status = "okay";
+};
+
+&usb2phy1 {
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <0>;
+ status = "okay";
+};
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 3/3] arm64: dts: rockchip: rk3566: Add Radxa Compute Module 3 IO
2023-01-12 10:59 [PATCH 1/3] dt-bindings: dt-bindings: arm: rockchip: Add Radxa Compute Module 3 Jagan Teki
2023-01-12 10:59 ` [PATCH 2/3] arm64: dts: rockchip: rk3566: " Jagan Teki
@ 2023-01-12 10:59 ` Jagan Teki
2023-01-12 11:45 ` [PATCH 1/3] dt-bindings: dt-bindings: arm: rockchip: Add Radxa Compute Module 3 Krzysztof Kozlowski
2023-01-15 14:46 ` Heiko Stuebner
3 siblings, 0 replies; 6+ messages in thread
From: Jagan Teki @ 2023-01-12 10:59 UTC (permalink / raw)
To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski,
Sebastian Reichel
Cc: linux-rockchip, devicetree, linux-arm-kernel, Jagan Teki,
FUKAUMI Naoki, Manoj Sai
Radxa Compute Module 3(CM3) IO board an application board from Radxa
and is compatible with Raspberry Pi CM4 IO form factor.
Specification:
- 1x HDMI,
- 2x MIPI DSI
- 2x MIPI CSI2
- 1x eDP
- 1x PCIe card
- 2x SATA
- 2x USB 2.0 Host
- 1x USB 3.0
- 1x USB 2.0 OTG
- Phone jack
- microSD slot
- 40-pin GPIO expansion header
- 12V DC
Radxa CM3 needs to mount on top of this IO board in order to create
complete Radxa CM3 IO board platform.
Add support for Radxa CM3 IO Board.
Co-developed-by: FUKAUMI Naoki <naoki@radxa.com>
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Co-developed-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 179 ++++++++++++++++++
2 files changed, 180 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index bf17abe9d12d..77211b79958a 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -74,6 +74,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-blade.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
new file mode 100644
index 000000000000..3e6578f27ec0
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Radxa Limited
+ * Copyright (c) 2022 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+#include "rk3566-radxa-cm3.dtsi"
+
+/ {
+ model = "Radxa Compute Module 3(CM3) IO Board";
+ compatible = "radxa,radxa-cm3-io", "radxa,radxa-cm3", "rockchip,rk3566";
+
+ aliases {
+ mmc1 = &sdmmc0;
+ };
+
+ chosen: chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ hdmi-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-1 {
+ gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_ACTIVITY;
+ linux,default-trigger = "heartbeat";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pi_nled_activity>;
+ };
+ };
+
+ vcc5v0_usb30: vcc5v0-usb30-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb30";
+ enable-active-high;
+ gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_usb30_en_h>;
+ regulator-always-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcca1v8_image: vcca1v8-image-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcca1v8_image";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8_p>;
+ };
+
+ vdda0v9_image: vdda0v9-image-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcca0v9_image";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ vin-supply = <&vdda_0v9>;
+ };
+};
+
+&combphy1 {
+ status = "okay";
+};
+
+&hdmi {
+ avdd-0v9-supply = <&vdda0v9_image>;
+ avdd-1v8-supply = <&vcca1v8_image>;
+ status = "okay";
+};
+
+&hdmi_in {
+ hdmi_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_hdmi>;
+ };
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&hdmi_sound {
+ status = "okay";
+};
+
+&pinctrl {
+ leds {
+ pi_nled_activity: pi-nled-activity {
+ rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sdcard {
+ sdmmc_pwren: sdmmc-pwren {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ vcc5v0_usb30_en_h: vcc5v0-host-en-h {
+ rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&sdmmc0 {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ vqmmc-supply = <&vccio_sd>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det &sdmmc0_pwren>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb2phy0_host {
+ phy-supply = <&vcc5v0_usb30>;
+ status = "okay";
+};
+
+&usb2phy1_host {
+ status = "okay";
+};
+
+&usb2phy1_otg {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host1_xhci {
+ status = "okay";
+};
+
+&vop {
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vp0 {
+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+ remote-endpoint = <&hdmi_in_vp0>;
+ };
+};
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH 1/3] dt-bindings: dt-bindings: arm: rockchip: Add Radxa Compute Module 3
2023-01-12 10:59 [PATCH 1/3] dt-bindings: dt-bindings: arm: rockchip: Add Radxa Compute Module 3 Jagan Teki
2023-01-12 10:59 ` [PATCH 2/3] arm64: dts: rockchip: rk3566: " Jagan Teki
2023-01-12 10:59 ` [PATCH 3/3] arm64: dts: rockchip: rk3566: Add Radxa Compute Module 3 IO Jagan Teki
@ 2023-01-12 11:45 ` Krzysztof Kozlowski
2023-01-15 14:46 ` Heiko Stuebner
3 siblings, 0 replies; 6+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-12 11:45 UTC (permalink / raw)
To: Jagan Teki, Heiko Stuebner, Rob Herring, Krzysztof Kozlowski,
Sebastian Reichel
Cc: linux-rockchip, devicetree, linux-arm-kernel
On 12/01/2023 11:59, Jagan Teki wrote:
> Radxa Compute Module 3(CM3) is one of the modules from a series
> System On Module based on the Radxa ROCK 3 series and is compatible
> with Raspberry Pi CM4 in pinout and form factor.
>
> Specification:
> - Rockchip RK3566
> - up to 8GB LPDDR4
> - up to 128GB high performance eMMC
> - Optional wireless LAN, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless,
> BT 5.0, BLE with onboard and external antenna.
> - Gigabit Ethernet PHY
>
> Add dt-bindings for Radxa CM3.
>
Subject: drop second/last, redundant "dt-bindings" (duplicate).
With above:
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/3] dt-bindings: dt-bindings: arm: rockchip: Add Radxa Compute Module 3
2023-01-12 10:59 [PATCH 1/3] dt-bindings: dt-bindings: arm: rockchip: Add Radxa Compute Module 3 Jagan Teki
` (2 preceding siblings ...)
2023-01-12 11:45 ` [PATCH 1/3] dt-bindings: dt-bindings: arm: rockchip: Add Radxa Compute Module 3 Krzysztof Kozlowski
@ 2023-01-15 14:46 ` Heiko Stuebner
2023-01-15 14:49 ` Heiko Stübner
3 siblings, 1 reply; 6+ messages in thread
From: Heiko Stuebner @ 2023-01-15 14:46 UTC (permalink / raw)
To: Rob Herring, Jagan Teki, Sebastian Reichel, Krzysztof Kozlowski
Cc: Heiko Stuebner, linux-arm-kernel, linux-rockchip, devicetree
On Thu, 12 Jan 2023 16:29:00 +0530, Jagan Teki wrote:
> Radxa Compute Module 3(CM3) is one of the modules from a series
> System On Module based on the Radxa ROCK 3 series and is compatible
> with Raspberry Pi CM4 in pinout and form factor.
>
> Specification:
> - Rockchip RK3566
> - up to 8GB LPDDR4
> - up to 128GB high performance eMMC
> - Optional wireless LAN, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless,
> BT 5.0, BLE with onboard and external antenna.
> - Gigabit Ethernet PHY
>
> [...]
Applied, thanks!
[1/3] dt-bindings: dt-bindings: arm: rockchip: Add Radxa Compute Module 3
commit: 8f590d9a049438f0fcab156690394be82060e800
[2/3] arm64: dts: rockchip: rk3566: Add Radxa Compute Module 3
commit: 206cf8403c9e9e46b74995b5bb98c6f4162d8a29
[3/3] arm64: dts: rockchip: rk3566: Add Radxa Compute Module 3 IO
commit: 856d168ab16b99b2a4d75d8f8c66390aafef996b
Best regards,
--
Heiko Stuebner <heiko@sntech.de>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH 1/3] dt-bindings: dt-bindings: arm: rockchip: Add Radxa Compute Module 3
2023-01-15 14:46 ` Heiko Stuebner
@ 2023-01-15 14:49 ` Heiko Stübner
0 siblings, 0 replies; 6+ messages in thread
From: Heiko Stübner @ 2023-01-15 14:49 UTC (permalink / raw)
To: Rob Herring, Jagan Teki, Sebastian Reichel, Krzysztof Kozlowski
Cc: linux-arm-kernel, linux-rockchip, devicetree
Am Sonntag, 15. Januar 2023, 15:46:49 CET schrieb Heiko Stuebner:
> On Thu, 12 Jan 2023 16:29:00 +0530, Jagan Teki wrote:
> > Radxa Compute Module 3(CM3) is one of the modules from a series
> > System On Module based on the Radxa ROCK 3 series and is compatible
> > with Raspberry Pi CM4 in pinout and form factor.
> >
> > Specification:
> > - Rockchip RK3566
> > - up to 8GB LPDDR4
> > - up to 128GB high performance eMMC
> > - Optional wireless LAN, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless,
> > BT 5.0, BLE with onboard and external antenna.
> > - Gigabit Ethernet PHY
> >
> > [...]
>
> Applied, thanks!
>
> [1/3] dt-bindings: dt-bindings: arm: rockchip: Add Radxa Compute Module 3
> commit: 8f590d9a049438f0fcab156690394be82060e800
for the record, I did drop the second dt-bindings from the subject as
suggested by Krzysztof and the patch is named
"dt-bindings: arm: rockchip: Add Radxa Compute Module 3"
Heiko
> [2/3] arm64: dts: rockchip: rk3566: Add Radxa Compute Module 3
> commit: 206cf8403c9e9e46b74995b5bb98c6f4162d8a29
> [3/3] arm64: dts: rockchip: rk3566: Add Radxa Compute Module 3 IO
> commit: 856d168ab16b99b2a4d75d8f8c66390aafef996b
>
> Best regards,
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread