From: Junhao He <hejunhao3@huawei.com>
To: <mathieu.poirier@linaro.org>, <suzuki.poulose@arm.com>,
<mike.leach@linaro.org>, <leo.yan@linaro.org>,
<jonathan.cameron@huawei.com>
Cc: <coresight@lists.linaro.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-doc@vger.kernel.org>, <lpieralisi@kernel.org>,
<linuxarm@huawei.com>, <yangyicong@huawei.com>,
<liuqi6124@gmail.com>, <f.fangjian@huawei.com>,
<shenyang39@huawei.com>, <prime.zeng@hisilicon.com>,
<hejunhao3@huawei.com>
Subject: [PATCH v16 0/2] Add support for UltraSoc System Memory Buffer
Date: Sat, 14 Jan 2023 18:13:00 +0800 [thread overview]
Message-ID: <20230114101302.62320-1-hejunhao3@huawei.com> (raw)
Add support for UltraSoc System Memory Buffer.
Change since v15:
- Modify document based on Bagas and Suzuki's comments.
- Link: https://lore.kernel.org/lkml/20221220092945.30722-1-hejunhao3@huawei.com/
Change since v14:
- Add some helpers to the buffer and simplify dumping data according to Jonathan's comment.
- Link: https://lore.kernel.org/lkml/20221123123823.27973-1-hejunhao3@huawei.com/
Change since v13:
- Modify document and the patches description according to Bagas's comment.
- Add dependency on config ACPI, drop redundant enable hw in smb_update_buffer(),
Modify smb_purge_data() description according to Suzuki's comment.
- Link: https://lore.kernel.org/lkml/20221114090316.63157-1-hejunhao3@huawei.com/
Change since v12:
- Modify the code style and add "#ifdef CONFIG_ACPI" according to Jonathan's comment.
- Address the comments from Yicong, included drop "buf_base"__iomem attribute,
modify the "reading" type to bool and fix FIELD_PREP.
- Link: https://lore.kernel.org/lkml/20221109135008.9485-1-hejunhao3@huawei.com/
Change since v11:
- Modify the code style and rename the macro according to Jonathan's comment.
- Link: https://lore.kernel.org/lkml/20221107130624.59886-1-hejunhao3@huawei.com/
Change since v10:
- Rebase onto v6.1-rc4, included similar sysfs register accessors (as same as James's patch)
- Link: https://lore.kernel.org/lkml/20221022115929.7503-1-hejunhao3@huawei.com/
Change since v9:
- Update the Contact tag in SMB document.
- Replace the spinlock with mutex.
- Do some clean-ups in "smb_enable()" and "smb_release()".
- Use classic memory mapped interface.
- Link: https://lore.kernel.org/linux-arm-kernel/20220818132231.28240-1-hejunhao3@huawei.com/
Change since v8:
- Insert a blank line at the end of the config tag in Kconfig according to Randy's comment.
- Link: https://lore.kernel.org/linux-arm-kernel/20220816131634.38195-1-hejunhao3@huawei.com/
Change since v7:
- Use the macros for register bit flags and numbers of resource.
- Cleanup punctuation.
- Update the Date tag and the KernelVersion tag in the document.
- Link: https://lore.kernel.org/lkml/20220712091353.34540-1-hejunhao3@huawei.com/
Change since v6:
- Modify the code style and driver description according to Suzuki's comment.
- Modify configuration of "drvdata->reading", to void problems in open/read
concurrency scenario.
- Rename the macro of "SMB_FLOW_MASK".
- Use the "handle->head" to determine the page number and offset.
- Link: https://lore.kernel.org/linux-arm-kernel/20220606130223.57354-1-liuqi115@huawei.com/
Change since v5:
- Address the comments from Suzuki, add some comments in SMB document, and modify
configuration of "drvdata->reading", to void problems in multi-core concurrency scenario
- Link: https://lore.kernel.org/linux-arm-kernel/20220416083953.52610-1-liuqi115@huawei.com/
Change since v4:
- Add a simple document of SMB driver according to Suzuki's comment.
- Address the comments from Suzuki.
- Link: https://lore.kernel.org/linux-arm-kernel/20220128061755.31909-1-liuqi115@huawei.com/
Change since v3:
- Modify the file header according to community specifications.
- Address the comments from Mathieu.
- Link: https://lore.kernel.org/linux-arm-kernel/20211118110016.40398-1-liuqi115@huawei.com/
Change since v2:
- Move ultrasoc driver to drivers/hwtracing/coresight by Mathieu's comment.
- Link: https://lists.linaro.org/pipermail/coresight/2021-November/007310.html
Change since v1:
- Drop the document of UltraSoc according to Mathieu's comment.
- Add comments to explain some private hardware settings.
- Address the comments from Mathieu.
- Link: https://lists.linaro.org/pipermail/coresight/2021-August/006842.html
Change since RFC:
- Move driver to drivers/hwtracing/coresight/ultrasoc.
- Remove ultrasoc-axi-com.c, as AXI-COM doesn't need to be configured in
basic tracing function.
- Remove ultrasoc.c as SMB does not need to register with the ultrasoc core.
- Address the comments from Mathieu and Suzuki.
- Link: https://lists.linaro.org/pipermail/coresight/2021-June/006535.html
Qi Liu (2):
drivers/coresight: Add UltraSoc System Memory Buffer driver
Documentation: Add document for UltraSoc SMB driver
.../sysfs-bus-coresight-devices-ultra_smb | 31 +
.../trace/coresight/ultrasoc-smb.rst | 83 +++
drivers/hwtracing/coresight/Kconfig | 12 +
drivers/hwtracing/coresight/Makefile | 1 +
drivers/hwtracing/coresight/ultrasoc-smb.c | 648 ++++++++++++++++++
drivers/hwtracing/coresight/ultrasoc-smb.h | 125 ++++
6 files changed, 900 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
create mode 100644 Documentation/trace/coresight/ultrasoc-smb.rst
create mode 100644 drivers/hwtracing/coresight/ultrasoc-smb.c
create mode 100644 drivers/hwtracing/coresight/ultrasoc-smb.h
--
2.33.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2023-01-14 10:14 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-14 10:13 Junhao He [this message]
2023-01-14 10:13 ` [PATCH v16 1/2] drivers/coresight: Add UltraSoc System Memory Buffer driver Junhao He
2023-01-14 10:13 ` [PATCH v16 2/2] Documentation: Add document for UltraSoc SMB driver Junhao He
2023-01-16 10:49 ` [PATCH v16 0/2] Add support for UltraSoc System Memory Buffer Suzuki K Poulose
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230114101302.62320-1-hejunhao3@huawei.com \
--to=hejunhao3@huawei.com \
--cc=coresight@lists.linaro.org \
--cc=f.fangjian@huawei.com \
--cc=jonathan.cameron@huawei.com \
--cc=leo.yan@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=liuqi6124@gmail.com \
--cc=lpieralisi@kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=mike.leach@linaro.org \
--cc=prime.zeng@hisilicon.com \
--cc=shenyang39@huawei.com \
--cc=suzuki.poulose@arm.com \
--cc=yangyicong@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).