[PATCH v3] remoteproc: imx_dsp_rproc: add module parameter to ignore ready flag from remote processor

From: "Iuliana Prodan (OSS)" <iuliana.prodan@oss.nxp.com>
To: Bjorn Andersson <andersson@kernel.org>,
	Mathieu Poirier <mathieu.poirier@linaro.org>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	"S.J. Wang" <shengjiu.wang@nxp.com>,
	Fabio Estevam <festevam@gmail.com>,
	Daniel Baluta <daniel.baluta@nxp.com>,
	Iuliana Prodan <iuliana.prodan@nxp.com>
Cc: linux-imx <linux-imx@nxp.com>,
	linux-remoteproc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Pengutronix Kernel Team <kernel@pengutronix.de>
Subject: [PATCH v3] remoteproc: imx_dsp_rproc: add module parameter to ignore ready flag from remote processor
Date: Tue, 17 Jan 2023 13:03:57 +0200	[thread overview]
Message-ID: <20230117110357.15091-1-iuliana.prodan@oss.nxp.com> (raw)

From: Iuliana Prodan <iuliana.prodan@nxp.com>

There are cases when we want to test a simple "hello world"
application on the DSP and we don't have IPC between the cores.
Therefore, skip the wait for remote processor to start.

Added "ignore_dsp_ready" flag while inserting the module to ignore
remote processor reply after start.
By default, this is off - do not ignore reply from rproc.

Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>

---
Changes since v2
- s/ignoreready/ignore_dsp_ready

Changes since v1
- change BIT(31) to BIT(1) for REMOTE_SKIP_WAIT

---
 drivers/remoteproc/imx_dsp_rproc.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/remoteproc/imx_dsp_rproc.c b/drivers/remoteproc/imx_dsp_rproc.c
index 95da1cbefacf..22e2ef068c67 100644
--- a/drivers/remoteproc/imx_dsp_rproc.c
+++ b/drivers/remoteproc/imx_dsp_rproc.c
@@ -26,9 +26,20 @@
 #include "remoteproc_elf_helpers.h"
 #include "remoteproc_internal.h"
 
+#define IMX_DSP_IGNORE_REMOTE_READY		0
+
+/*
+ * Module parameters
+ */
+static unsigned int imx_dsp_rproc_ignore_ready = IMX_DSP_IGNORE_REMOTE_READY;
+module_param_named(ignore_dsp_ready, imx_dsp_rproc_ignore_ready, int, 0644);
+MODULE_PARM_DESC(ignore_dsp_ready,
+		 "Ignore remote proc reply after start, default is 0 (off).");
+
 #define DSP_RPROC_CLK_MAX			5
 
 #define REMOTE_IS_READY				BIT(0)
+#define REMOTE_SKIP_WAIT			BIT(1)
 #define REMOTE_READY_WAIT_MAX_RETRIES		500
 
 /* att flags */
@@ -285,6 +296,9 @@ static int imx_dsp_rproc_ready(struct rproc *rproc)
 	if (!priv->rxdb_ch)
 		return 0;
 
+	if (priv->flags & REMOTE_SKIP_WAIT)
+		return 0;
+
 	for (i = 0; i < REMOTE_READY_WAIT_MAX_RETRIES; i++) {
 		if (priv->flags & REMOTE_IS_READY)
 			return 0;
@@ -903,6 +917,9 @@ static int imx_dsp_rproc_probe(struct platform_device *pdev)
 	priv->rproc = rproc;
 	priv->dsp_dcfg = dsp_dcfg;
 
+	if (imx_dsp_rproc_ignore_ready)
+		priv->flags |= REMOTE_SKIP_WAIT;
+
 	dev_set_drvdata(dev, rproc);
 
 	INIT_WORK(&priv->rproc_work, imx_dsp_rproc_vq_work);
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
