From: Fabio Estevam <festevam@denx.de>
To: shawnguo@kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
Fabio Estevam <festevam@denx.de>,
stable@vger.kernel.org
Subject: [PATCH] ARM: dts: imx7d-smegw01: Fix USB host over-current polarity
Date: Tue, 17 Jan 2023 08:25:10 -0300 [thread overview]
Message-ID: <20230117112510.109123-1-festevam@denx.de> (raw)
Currently, when resetting the USB modem via AT commands, the modem is
no longer re-connected.
This problem is caused by the incorrect description of the USB_OTG2_OC
pad. It should have pull-up enabled, hysteresis enabled and the
property 'over-current-active-low' should be passed.
With this change, the USB modem can be successfully re-connected
after a reset.
Cc: stable@vger.kernel.org
Fixes: 9ac0ae97e349 ("ARM: dts: imx7d-smegw01: Add support for i.MX7D SMEGW01 board")
Signed-off-by: Fabio Estevam <festevam@denx.de>
---
arch/arm/boot/dts/imx7d-smegw01.dts | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx7d-smegw01.dts b/arch/arm/boot/dts/imx7d-smegw01.dts
index 546268b8d0b1..c0f00f5db11e 100644
--- a/arch/arm/boot/dts/imx7d-smegw01.dts
+++ b/arch/arm/boot/dts/imx7d-smegw01.dts
@@ -198,6 +198,7 @@ &usbotg1 {
&usbotg2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg2>;
+ over-current-active-low;
dr_mode = "host";
status = "okay";
};
@@ -374,7 +375,7 @@ MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x04
pinctrl_usbotg2: usbotg2grp {
fsl,pins = <
- MX7D_PAD_UART3_RTS_B__USB_OTG2_OC 0x04
+ MX7D_PAD_UART3_RTS_B__USB_OTG2_OC 0x5c
>;
};
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2023-01-17 11:26 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-17 11:25 Fabio Estevam [this message]
2023-01-26 7:38 ` [PATCH] ARM: dts: imx7d-smegw01: Fix USB host over-current polarity Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230117112510.109123-1-festevam@denx.de \
--to=festevam@denx.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=shawnguo@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox