From: Bryan Brattlof <bb@ti.com>
To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: ARM Linux Mailing List <linux-arm-kernel@lists.infradead.org>,
Device Tree Mailing List <devicetree@vger.kernel.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Keerthy <j-keerthy@ti.com>, Bryan Brattlof <bb@ti.com>
Subject: [PATCH v2 6/6] arm64: dts: ti: k3-am62a-wakeup: add VTM node
Date: Thu, 19 Jan 2023 18:30:51 -0600 [thread overview]
Message-ID: <20230120003051.9100-7-bb@ti.com> (raw)
In-Reply-To: <20230120003051.9100-1-bb@ti.com>
The am62ax supports a single Voltage and Thermal Management (VTM) device
located in the wakeup domain with three associated temperature monitors
located in various hot spots of the die.
Signed-off-by: Bryan Brattlof <bb@ti.com>
---
arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi | 47 ++++++++++++++++++++
arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi | 8 ++++
arch/arm64/boot/dts/ti/k3-am62a.dtsi | 2 +
3 files changed, 57 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi
new file mode 100644
index 0000000000000..85ce545633ea5
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+thermal_zones: thermal-zones {
+ main0_thermal: main0-thermal {
+ polling-delay-passive = <250>; /* milliSeconds */
+ polling-delay = <500>; /* milliSeconds */
+ thermal-sensors = <&wkup_vtm0 0>;
+
+ trips {
+ main0_crit: main0-crit {
+ temperature = <125000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+ };
+
+ main1_thermal: main1-thermal {
+ polling-delay-passive = <250>; /* milliSeconds */
+ polling-delay = <500>; /* milliSeconds */
+ thermal-sensors = <&wkup_vtm0 1>;
+
+ trips {
+ main1_crit: main1-crit {
+ temperature = <125000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+ };
+
+ main2_thermal: main2-thermal {
+ polling-delay-passive = <250>; /* milliSeconds */
+ polling-delay = <500>; /* milliSeconds */
+ thermal-sensors = <&wkup_vtm0 2>;
+
+ trips {
+ main2_crit: main2-crit {
+ temperature = <125000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
index 81d984414fd4a..9bdafead7199a 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
@@ -51,4 +51,12 @@ wkup_rtc0: rtc@2b1f0000 {
wakeup-source;
status = "disabled";
};
+
+ wkup_vtm0: temperature-sensor@b00000 {
+ compatible = "ti,j7200-vtm";
+ reg = <0x00 0xb00000 0x00 0x400>,
+ <0x00 0xb01000 0x00 0x400>;
+ power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>;
+ #thermal-sensor-cells = <1>;
+ };
};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a.dtsi b/arch/arm64/boot/dts/ti/k3-am62a.dtsi
index 6eb87c3f9f3ce..84e8adeeebb61 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a.dtsi
@@ -114,6 +114,8 @@ cbass_wakeup: bus@b00000 {
<0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM*/
};
};
+
+ #include "k3-am62a-thermal.dtsi"
};
/* Now include the peripherals for each bus segments */
--
2.39.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-01-20 0:33 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-20 0:30 [PATCH v2 0/6] add VTM nodes to TI's K3 SoCs Bryan Brattlof
2023-01-20 0:30 ` [PATCH v2 1/6] arm64: dts: ti: k3-am64-main: add VTM node Bryan Brattlof
2023-04-03 13:02 ` Christian Gmeiner
2023-01-20 0:30 ` [PATCH v2 2/6] arm64: dts: ti: k3-am62-wakeup: " Bryan Brattlof
2023-01-28 5:23 ` Raghavendra, Vignesh
2023-01-31 1:57 ` Bryan Brattlof
2023-04-03 13:04 ` Christian Gmeiner
2023-04-03 14:09 ` Bryan Brattlof
2023-01-20 0:30 ` [PATCH v2 3/6] arm64: dts: ti: k3-j721e-mcu-wakeup: " Bryan Brattlof
2023-01-20 0:30 ` [PATCH v2 4/6] arm64: dts: ti: k3-j721s2-mcu-wakeup: " Bryan Brattlof
2023-01-20 0:30 ` [PATCH v2 5/6] arm64: dts: ti: k3-j7200-mcu-wakeup: " Bryan Brattlof
2023-01-20 0:30 ` Bryan Brattlof [this message]
2023-06-15 10:22 ` [PATCH v2 0/6] add VTM nodes to TI's K3 SoCs Vignesh Raghavendra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230120003051.9100-7-bb@ti.com \
--to=bb@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=j-keerthy@ti.com \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).