From: "Lothar Waßmann" <LW@KARO-electronics.de>
To: Liu Ying <victor.liu@nxp.com>
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, marex@denx.de,
stefan@agner.ch, airlied@gmail.com, daniel@ffwll.ch,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
shawnguo@kernel.org, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com
Subject: Re: [PATCH 2/2] drm: lcdif: Add i.MX93 LCDIF support
Date: Mon, 23 Jan 2023 09:13:07 +0100 [thread overview]
Message-ID: <20230123091307.46ace33f@karo-electronics.de> (raw)
In-Reply-To: <20230123072358.1060670-3-victor.liu@nxp.com>
Hi,
On Mon, 23 Jan 2023 15:23:58 +0800 Liu Ying wrote:
> The LCDIF embedded in i.MX93 SoC is essentially the same to those
> in i.MX8mp SoC. However, i.MX93 LCDIF may connect with MIPI DSI
> controller through LCDIF cross line pattern(controlled by mediamix
> blk-ctrl) or connect with LVDS display bridge(LDB) directly or a
> parallel display(also through mediamix blk-ctrl), so add multiple
> encoders(with DRM_MODE_ENCODER_NONE encoder type) support in the
> LCDIF DRM driver and find a bridge to attach the relevant encoder's
> chain when needed. While at it, derive lcdif_crtc_state structure
> from drm_crtc_state structure to introduce bus_format and bus_flags
> states so that the next downstream bridges may use consistent bus
> format and bus flags.
>
> Signed-off-by: Liu Ying <victor.liu@nxp.com>
> ---
> drivers/gpu/drm/mxsfb/lcdif_drv.c | 73 +++++++++--
> drivers/gpu/drm/mxsfb/lcdif_drv.h | 6 +-
> drivers/gpu/drm/mxsfb/lcdif_kms.c | 206 ++++++++++++++++++++----------
> 3 files changed, 208 insertions(+), 77 deletions(-)
>
> diff --git a/drivers/gpu/drm/mxsfb/lcdif_drv.c b/drivers/gpu/drm/mxsfb/lcdif_drv.c
> index cc2ceb301b96..4d41f6b6eb14 100644
> --- a/drivers/gpu/drm/mxsfb/lcdif_drv.c
> +++ b/drivers/gpu/drm/mxsfb/lcdif_drv.c
> @@ -9,13 +9,16 @@
> #include <linux/dma-mapping.h>
> #include <linux/io.h>
> #include <linux/module.h>
> +#include <linux/of.h>
> #include <linux/of_device.h>
> +#include <linux/of_graph.h>
> #include <linux/platform_device.h>
> #include <linux/pm_runtime.h>
>
> #include <drm/drm_atomic_helper.h>
> #include <drm/drm_bridge.h>
> #include <drm/drm_drv.h>
> +#include <drm/drm_encoder.h>
> #include <drm/drm_fbdev_generic.h>
> #include <drm/drm_gem_dma_helper.h>
> #include <drm/drm_gem_framebuffer_helper.h>
> @@ -38,21 +41,70 @@ static const struct drm_mode_config_helper_funcs lcdif_mode_config_helpers = {
> .atomic_commit_tail = drm_atomic_helper_commit_tail_rpm,
> };
>
> +static const struct drm_encoder_funcs lcdif_encoder_funcs = {
> + .destroy = drm_encoder_cleanup,
> +};
> +
> static int lcdif_attach_bridge(struct lcdif_drm_private *lcdif)
> {
> - struct drm_device *drm = lcdif->drm;
> + struct device *dev = lcdif->drm->dev;
> + struct device_node *ep;
> struct drm_bridge *bridge;
> int ret;
>
> - bridge = devm_drm_of_get_bridge(drm->dev, drm->dev->of_node, 0, 0);
> - if (IS_ERR(bridge))
> - return PTR_ERR(bridge);
> -
> - ret = drm_bridge_attach(&lcdif->encoder, bridge, NULL, 0);
> - if (ret)
> - return dev_err_probe(drm->dev, ret, "Failed to attach bridge\n");
> -
> - lcdif->bridge = bridge;
> + for_each_endpoint_of_node(dev->of_node, ep) {
> + struct device_node *remote;
> + struct of_endpoint of_ep;
> + struct drm_encoder *encoder;
> +
> + remote = of_graph_get_remote_port_parent(ep);
> + if (!remote || !of_device_is_available(remote)) {
'!remote ||' is redundant, since of_device_is_available already checks
for a NULL pointer.
[...]
> diff --git a/drivers/gpu/drm/mxsfb/lcdif_kms.c b/drivers/gpu/drm/mxsfb/lcdif_kms.c
> index 262bc43b1079..ba36447ed900 100644
> --- a/drivers/gpu/drm/mxsfb/lcdif_kms.c
> +++ b/drivers/gpu/drm/mxsfb/lcdif_kms.c
[...]
> @@ -529,6 +580,46 @@ static void lcdif_crtc_atomic_disable(struct drm_crtc *crtc,
> pm_runtime_put_sync(drm->dev);
> }
>
> +static void lcdif_crtc_reset(struct drm_crtc *crtc)
> +{
> + struct lcdif_crtc_state *state;
> +
> + if (crtc->state)
> + __drm_atomic_helper_crtc_destroy_state(crtc->state);
> +
> + kfree(to_lcdif_crtc_state(crtc->state));
>
If crtc-state can be NULL at this point, this will only work as long as
'base' is the first member of the lcdif_crtc_state struct (which
currently is the case, but there is no guarantee that this will always
be this way), otherwise the if clause above is not needed.
Lothar Waßmann
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-01-23 8:14 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-23 7:23 [PATCH 0/2] drm: lcdif: Add i.MX93 LCDIF support Liu Ying
2023-01-23 7:23 ` [PATCH 1/2] dt-bindings: " Liu Ying
2023-01-23 8:53 ` Krzysztof Kozlowski
2023-01-23 15:50 ` Marek Vasut
2023-01-23 7:23 ` [PATCH 2/2] drm: " Liu Ying
2023-01-23 8:13 ` Lothar Waßmann [this message]
2023-01-24 7:34 ` Liu Ying
2023-01-23 15:57 ` Marek Vasut
2023-01-24 7:59 ` Liu Ying
2023-01-24 11:15 ` Alexander Stein
2023-01-24 14:21 ` Liu Ying
2023-01-24 14:47 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230123091307.46ace33f@karo-electronics.de \
--to=lw@karo-electronics.de \
--cc=airlied@gmail.com \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marex@denx.de \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=stefan@agner.ch \
--cc=victor.liu@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).