public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Jagan Teki <jagan@amarulasolutions.com>
To: Andrzej Hajda <andrzej.hajda@intel.com>,
	Inki Dae <inki.dae@samsung.com>,
	Marek Szyprowski <m.szyprowski@samsung.com>,
	Joonyoung Shim <jy0922.shim@samsung.com>,
	Seung-Woo Kim <sw0312.kim@samsung.com>,
	Kyungmin Park <kyungmin.park@samsung.com>,
	Frieder Schrempf <frieder.schrempf@kontron.de>,
	Fancy Fang <chen.fang@nxp.com>,
	Tim Harvey <tharvey@gateworks.com>,
	Michael Nazzareno Trimarchi <michael@amarulasolutions.com>,
	Adam Ford <aford173@gmail.com>,
	Neil Armstrong <narmstrong@linaro.org>,
	Robert Foss <robert.foss@linaro.org>,
	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	Tommaso Merciai <tommaso.merciai@amarulasolutions.com>,
	Marek Vasut <marex@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>,
	dri-devel@lists.freedesktop.org,
	linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	NXP Linux Team <linux-imx@nxp.com>,
	linux-amarula <linux-amarula@amarulasolutions.com>,
	Jagan Teki <jagan@amarulasolutions.com>
Subject: [RESEND PATCH v11 06/18] drm: exynos: dsi: Add platform PLL_P (PMS_P) offset
Date: Mon, 23 Jan 2023 20:42:00 +0530	[thread overview]
Message-ID: <20230123151212.269082-7-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20230123151212.269082-1-jagan@amarulasolutions.com>

Look like PLL PMS_P offset value varies between platforms that have
Samsung DSIM IP.

However, there is no clear evidence for it as both Exynos and i.MX
8M Mini Application Processor Reference Manual is still referring
the PMS_P offset as 13.

The offset 13 is not working for i.MX8M Mini SoCs but the downstream
NXP sec-dsim.c driver is using offset 14 for i.MX8M Mini SoC platforms
[1] [2].

PMS_P value set in sec_mipi_dsim_check_pll_out using PLLCTRL_SET_P()
with offset 13 and then an additional offset of one bit added in
sec_mipi_dsim_config_pll via PLLCTRL_SET_PMS().

Not sure whether it is reference manual documentation or something
else but this patch trusts the downstream code and handle PLL_P offset
via platform driver data so-that imx8mm driver data shall use
pll_p_offset to 14.

Similar to Mini the i.MX8M Nano/Plus also has P=14, unlike Exynos.

[1] https://source.codeaurora.org/external/imx/linux-imx/tree/drivers/gpu/drm/bridge/sec-dsim.c?h=imx_5.4.47_2.2.0#n210
[2] https://source.codeaurora.org/external/imx/linux-imx/tree/drivers/gpu/drm/bridge/sec-dsim.c?h=imx_5.4.47_2.2.0#n211

Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v11, v10, v9:
- none
Changes for v8:
- updated commit message for 8M Nano/Plus
Changes for v7, v6:
- none
Changes for v5:
- updated clear commit message
Changes for v4, v3, v2:
- none
Changes for v1:
- updated commit message
- add downstream driver link

 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 5918d31127aa..7a845badb1b2 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -194,7 +194,7 @@
 /* DSIM_PLLCTRL */
 #define DSIM_FREQ_BAND(x)		((x) << 24)
 #define DSIM_PLL_EN			(1 << 23)
-#define DSIM_PLL_P(x)			((x) << 13)
+#define DSIM_PLL_P(x, offset)		((x) << (offset))
 #define DSIM_PLL_M(x)			((x) << 4)
 #define DSIM_PLL_S(x)			((x) << 1)
 
@@ -263,6 +263,7 @@ struct exynos_dsi_driver_data {
 	unsigned int max_freq;
 	unsigned int wait_for_reset;
 	unsigned int num_bits_resol;
+	unsigned int pll_p_offset;
 	const unsigned int *reg_values;
 };
 
@@ -471,6 +472,7 @@ static const struct exynos_dsi_driver_data exynos3_dsi_driver_data = {
 	.max_freq = 1000,
 	.wait_for_reset = 1,
 	.num_bits_resol = 11,
+	.pll_p_offset = 13,
 	.reg_values = reg_values,
 };
 
@@ -483,6 +485,7 @@ static const struct exynos_dsi_driver_data exynos4_dsi_driver_data = {
 	.max_freq = 1000,
 	.wait_for_reset = 1,
 	.num_bits_resol = 11,
+	.pll_p_offset = 13,
 	.reg_values = reg_values,
 };
 
@@ -493,6 +496,7 @@ static const struct exynos_dsi_driver_data exynos5_dsi_driver_data = {
 	.max_freq = 1000,
 	.wait_for_reset = 1,
 	.num_bits_resol = 11,
+	.pll_p_offset = 13,
 	.reg_values = reg_values,
 };
 
@@ -504,6 +508,7 @@ static const struct exynos_dsi_driver_data exynos5433_dsi_driver_data = {
 	.max_freq = 1500,
 	.wait_for_reset = 0,
 	.num_bits_resol = 12,
+	.pll_p_offset = 13,
 	.reg_values = exynos5433_reg_values,
 };
 
@@ -515,6 +520,7 @@ static const struct exynos_dsi_driver_data exynos5422_dsi_driver_data = {
 	.max_freq = 1500,
 	.wait_for_reset = 1,
 	.num_bits_resol = 12,
+	.pll_p_offset = 13,
 	.reg_values = exynos5422_reg_values,
 };
 
@@ -628,7 +634,8 @@ static unsigned long exynos_dsi_set_pll(struct exynos_dsi *dsi,
 	writel(driver_data->reg_values[PLL_TIMER],
 			dsi->reg_base + driver_data->plltmr_reg);
 
-	reg = DSIM_PLL_EN | DSIM_PLL_P(p) | DSIM_PLL_M(m) | DSIM_PLL_S(s);
+	reg = DSIM_PLL_EN | DSIM_PLL_P(p, driver_data->pll_p_offset) |
+	      DSIM_PLL_M(m) | DSIM_PLL_S(s);
 
 	if (driver_data->has_freqband) {
 		static const unsigned long freq_bands[] = {
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2023-01-23 15:16 UTC|newest]

Thread overview: 68+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-23 15:11 [RESEND PATCH v11 00/18] drm: Add Samsung MIPI DSIM bridge Jagan Teki
2023-01-23 15:11 ` [RESEND PATCH v11 01/18] drm: of: Lookup if child node has DSI panel or bridge Jagan Teki
2023-01-23 15:11 ` [RESEND PATCH v11 02/18] drm: bridge: panel: Add devm_drm_of_dsi_get_bridge helper Jagan Teki
2023-01-26 12:12   ` Maxime Ripard
2023-01-26 15:18     ` Jagan Teki
2023-01-27 17:39       ` Jagan Teki
2023-01-30 12:56         ` Maxime Ripard
2023-01-30 13:24           ` Jagan Teki
2023-01-31 12:45             ` Maxime Ripard
2023-01-31 13:47               ` Jagan Teki
2023-01-31 13:59                 ` Maxime Ripard
2023-01-31 14:14                   ` Jagan Teki
2023-01-30 12:58       ` Maxime Ripard
2023-01-30 13:22         ` Jagan Teki
2023-02-02 16:52         ` Jagan Teki
2023-02-03  8:26           ` Maxime Ripard
2023-02-03 10:43             ` Jagan Teki
2023-02-03 10:49               ` Maxime Ripard
2023-02-03 10:58                 ` Jagan Teki
2023-02-03 11:04                   ` Maxime Ripard
2023-02-27 11:25                     ` Jagan Teki
2023-01-23 15:11 ` [RESEND PATCH v11 03/18] drm: exynos: dsi: Drop explicit call to bridge detach Jagan Teki
2023-01-23 15:11 ` [RESEND PATCH v11 04/18] drm: exynos: dsi: Switch to devm_drm_of_dsi_get_bridge Jagan Teki
2023-01-23 15:11 ` [RESEND PATCH v11 05/18] drm: exynos: dsi: Mark PHY as optional Jagan Teki
2023-01-23 15:12 ` Jagan Teki [this message]
2023-01-23 15:12 ` [RESEND PATCH v11 07/18] drm: exynos: dsi: Introduce hw_type platform data Jagan Teki
2023-01-24 20:54   ` Marek Vasut
2023-01-23 15:12 ` [RESEND PATCH v11 08/18] drm: exynos: dsi: Handle proper host initialization Jagan Teki
2023-01-24 21:00   ` Marek Vasut
2023-01-23 15:12 ` [RESEND PATCH v11 09/18] drm: exynos: dsi: Add atomic check Jagan Teki
2023-01-24 20:55   ` Marek Vasut
2023-01-23 15:12 ` [RESEND PATCH v11 10/18] drm: exynos: dsi: Add input_bus_flags Jagan Teki
2023-01-24 20:55   ` Marek Vasut
2023-01-23 15:12 ` [RESEND PATCH v11 11/18] drm: exynos: dsi: Add atomic_get_input_bus_fmts Jagan Teki
2023-01-24 20:45   ` Marek Vasut
2023-01-24 21:16     ` Jagan Teki
2023-01-24 21:19       ` Marek Vasut
2023-01-24 21:22         ` Jagan Teki
2023-01-23 15:12 ` [RESEND PATCH v11 12/18] drm: exynos: dsi: Consolidate component and bridge Jagan Teki
2023-01-24 21:04   ` Marek Vasut
2023-01-23 15:12 ` [RESEND PATCH v11 13/18] drm: exynos: dsi: Add Exynos based host irq hooks Jagan Teki
2023-01-24 20:48   ` Marek Vasut
2023-01-24 21:01     ` Jagan Teki
2023-01-24 21:12       ` Marek Vasut
2023-01-24 21:24         ` Jagan Teki
2023-01-24 21:24           ` Jagan Teki
2023-01-25  6:54             ` Jagan Teki
2023-01-25 13:53               ` Marek Vasut
2023-01-25 14:04                 ` Jagan Teki
2023-01-25 16:46                   ` Marek Vasut
2023-01-25 17:12                     ` Jagan Teki
2023-01-25 17:27                       ` Marek Vasut
2023-01-25 17:35                         ` Jagan Teki
2023-01-25 18:03                           ` Marek Vasut
2023-01-25 19:24                             ` Jagan Teki
2023-01-25 21:53                               ` Marek Vasut
2023-01-25 16:02         ` Jagan Teki
2023-01-23 15:12 ` [RESEND PATCH v11 15/18] dt-bindings: display: exynos: dsim: Add NXP i.MX8M Mini/Nano support Jagan Teki
2023-01-24 20:56   ` Marek Vasut
2023-01-23 15:12 ` [RESEND PATCH v11 16/18] drm: bridge: samsung-dsim: Add " Jagan Teki
2023-01-24 20:56   ` Marek Vasut
2023-01-23 15:12 ` [RESEND PATCH v11 17/18] dt-bindings: display: exynos: dsim: Add NXP i.MX8M Plus support Jagan Teki
2023-01-24 20:57   ` Marek Vasut
2023-01-23 15:12 ` [RESEND PATCH v11 18/18] drm: bridge: samsung-dsim: Add " Jagan Teki
2023-01-24 20:59   ` Marek Vasut
2023-01-24 19:12 ` [RESEND PATCH v11 00/18] drm: Add Samsung MIPI DSIM bridge Jagan Teki
     [not found] ` <20230123151212.269082-15-jagan@amarulasolutions.com>
2023-01-24 20:57   ` [RESEND PATCH v11 14/18] drm: bridge: Generalize Exynos-DSI driver into a Samsung " Marek Vasut
2023-01-24 21:13 ` [RESEND PATCH v11 00/18] drm: Add Samsung MIPI " Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230123151212.269082-7-jagan@amarulasolutions.com \
    --to=jagan@amarulasolutions.com \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=aford173@gmail.com \
    --cc=andrzej.hajda@intel.com \
    --cc=chen.fang@nxp.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=frieder.schrempf@kontron.de \
    --cc=inki.dae@samsung.com \
    --cc=jy0922.shim@samsung.com \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-amarula@amarulasolutions.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=marex@denx.de \
    --cc=matteo.lisi@engicam.com \
    --cc=michael@amarulasolutions.com \
    --cc=narmstrong@linaro.org \
    --cc=robert.foss@linaro.org \
    --cc=sw0312.kim@samsung.com \
    --cc=tharvey@gateworks.com \
    --cc=tommaso.merciai@amarulasolutions.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox