From: Anand Moon <linux.amoon@gmail.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH linux-next v4 3/4] arm64: dts: meson: move usb-hub node under dwc3 node on Odroid C4
Date: Tue, 24 Jan 2023 14:40:52 +0000 [thread overview]
Message-ID: <20230124144054.13556-4-linux.amoon@gmail.com> (raw)
In-Reply-To: <20230124144054.13556-1-linux.amoon@gmail.com>
Move the usb-hub node under dwc3 node and drop superfluous
dr_mode as it is the default in meson-g12-common.dtsi.
Fixes: 71593b2020b3 ("arm64: dts: amlogic: Used onboard usb hub reset on odroid c4")
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
.../boot/dts/amlogic/meson-sm1-odroid-c4.dts | 41 +++++++++----------
1 file changed, 20 insertions(+), 21 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
index d04768a66bfe..a988015dd2d5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
@@ -26,30 +26,29 @@ led-blue {
sound {
model = "ODROID-C4";
};
+};
+&dwc3 {
/* USB hub supports both USB 2.0 and USB 3.0 root hub */
- usb-hub {
- dr_mode = "host";
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* 2.0 hub on port 1 */
- hub_2_0: hub@1 {
- compatible = "usb2109,2817";
- reg = <1>;
- peer-hub = <&hub_3_0>;
- reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
- vdd-supply = <&vcc_5v>;
- };
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ hub_2_0: hub@1 {
+ compatible = "usb2109,2817";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&vcc_5v>;
+ };
- /* 3.1 hub on port 4 */
- hub_3_0: hub@2 {
- compatible = "usb2109,817";
- reg = <2>;
- peer-hub = <&hub_2_0>;
- reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
- vdd-supply = <&vcc_5v>;
- };
+ /* 3.1 hub on port 4 */
+ hub_3_0: hub@2 {
+ compatible = "usb2109,817";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&vcc_5v>;
};
};
--
2.38.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2023-01-24 14:42 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20230124144054.13556-1-linux.amoon@gmail.com>
2023-01-24 14:40 ` [PATCH linux-next v4 1/4] ARM: dts: amlogic: Drop superfluous dr_mode in usb node on odroid C1 Anand Moon
2023-01-24 14:40 ` [PATCH linux-next v4 2/4] arm64: dts: amlogic: Drop superfluous dr_mode in usb node on odroid c2 Anand Moon
2023-01-24 14:40 ` Anand Moon [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230124144054.13556-4-linux.amoon@gmail.com \
--to=linux.amoon@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=neil.armstrong@linaro.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).