Re: [PATCH v5 2/2] arm64: kgdb: Set PSTATE.SS to 1 to re-enable single-step

From: Will Deacon <will@kernel.org>
To: Sumit Garg <sumit.garg@linaro.org>
Cc: catalin.marinas@arm.com, mark.rutland@arm.com,
	daniel.thompson@linaro.org, dianders@chromium.org,
	liwei391@huawei.com, mhiramat@kernel.org, maz@kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 2/2] arm64: kgdb: Set PSTATE.SS to 1 to re-enable single-step
Date: Fri, 27 Jan 2023 11:50:39 +0000	[thread overview]
Message-ID: <20230127115039.GA30505@willie-the-truck> (raw)
In-Reply-To: <20221219102452.2860088-3-sumit.garg@linaro.org>

On Mon, Dec 19, 2022 at 03:54:52PM +0530, Sumit Garg wrote:
> Currently only the first attempt to single-step has any effect. After
> that all further stepping remains "stuck" at the same program counter
> value.
> 
> Refer to the ARM Architecture Reference Manual (ARM DDI 0487E.a) D2.12,
> PSTATE.SS=1 should be set at each step before transferring the PE to the
> 'Active-not-pending' state. The problem here is PSTATE.SS=1 is not set
> since the second single-step.
> 
> After the first single-step, the PE transferes to the 'Inactive' state,
> with PSTATE.SS=0 and MDSCR.SS=1, thus PSTATE.SS won't be set to 1 due to
> kernel_active_single_step()=true. Then the PE transferes to the
> 'Active-pending' state when ERET and returns to the debugger by step
> exception.
> 
> Before this patch:
> ==================
> Entering kdb (current=0xffff3376039f0000, pid 1) on processor 0 due to Keyboard Entry
> [0]kdb>
> 
> [0]kdb>
> [0]kdb> bp write_sysrq_trigger
> Instruction(i) BP #0 at 0xffffa45c13d09290 (write_sysrq_trigger)
>     is enabled   addr at ffffa45c13d09290, hardtype=0 installed=0
> 
> [0]kdb> go
> $ echo h > /proc/sysrq-trigger
> 
> Entering kdb (current=0xffff4f7e453f8000, pid 175) on processor 1 due to Breakpoint @ 0xffffad651a309290
> [1]kdb> ss
> 
> Entering kdb (current=0xffff4f7e453f8000, pid 175) on processor 1 due to SS trap @ 0xffffad651a309294
> [1]kdb> ss
> 
> Entering kdb (current=0xffff4f7e453f8000, pid 175) on processor 1 due to SS trap @ 0xffffad651a309294
> [1]kdb>
> 
> After this patch:
> =================
> Entering kdb (current=0xffff6851c39f0000, pid 1) on processor 0 due to Keyboard Entry
> [0]kdb> bp write_sysrq_trigger
> Instruction(i) BP #0 at 0xffffc02d2dd09290 (write_sysrq_trigger)
>     is enabled   addr at ffffc02d2dd09290, hardtype=0 installed=0
> 
> [0]kdb> go
> $ echo h > /proc/sysrq-trigger
> 
> Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to Breakpoint @ 0xffffc02d2dd09290
> [1]kdb> ss
> 
> Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to SS trap @ 0xffffc02d2dd09294
> [1]kdb> ss
> 
> Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to SS trap @ 0xffffc02d2dd09298
> [1]kdb> ss
> 
> Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to SS trap @ 0xffffc02d2dd0929c
> [1]kdb>
> 
> Fixes: 44679a4f142b ("arm64: KGDB: Add step debugging support")
> Co-developed-by: Wei Li <liwei391@huawei.com>
> Signed-off-by: Wei Li <liwei391@huawei.com>
> Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
> Tested-by: Douglas Anderson <dianders@chromium.org>
> ---
>  arch/arm64/include/asm/debug-monitors.h | 1 +
>  arch/arm64/kernel/debug-monitors.c      | 5 +++++
>  arch/arm64/kernel/kgdb.c                | 2 ++
>  3 files changed, 8 insertions(+)
> 
> diff --git a/arch/arm64/include/asm/debug-monitors.h b/arch/arm64/include/asm/debug-monitors.h
> index 7b7e05c02691..ce3875ad5cd3 100644
> --- a/arch/arm64/include/asm/debug-monitors.h
> +++ b/arch/arm64/include/asm/debug-monitors.h
> @@ -104,6 +104,7 @@ void user_regs_reset_single_step(struct user_pt_regs *regs,
>  void kernel_enable_single_step(struct pt_regs *regs);
>  void kernel_disable_single_step(void);
>  int kernel_active_single_step(void);
> +void kernel_regs_reset_single_step(struct pt_regs *regs);
>  
>  #ifdef CONFIG_HAVE_HW_BREAKPOINT
>  int reinstall_suspended_bps(struct pt_regs *regs);
> diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c
> index 3da09778267e..9af898b22ed4 100644
> --- a/arch/arm64/kernel/debug-monitors.c
> +++ b/arch/arm64/kernel/debug-monitors.c
> @@ -438,6 +438,11 @@ int kernel_active_single_step(void)
>  }
>  NOKPROBE_SYMBOL(kernel_active_single_step);
>  
> +void kernel_regs_reset_single_step(struct pt_regs *regs)
> +{
> +	set_regs_spsr_ss(regs);
> +}

Just a nit on the naming here, but please can this be
kernel_rewind_single_step() instead? I think it's closer to the rewind
function we have for user tasks than the reset function.

Cheers,

Will

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel