Re: [RESEND PATCH v5 00/10] Add MediaTek MT7986 SPI NAND and ECC support

Re: [RESEND PATCH v5 00/10] Add MediaTek MT7986 SPI NAND and ECC support

[Miquel Raynal]

Hi Xiangsheng,

xiangsheng.hou@mediatek.com wrote on Mon, 30 Jan 2023 11:06:46 +0800:

> This patch series add MediaTek MT7986 SPI NAND and ECC controller
> support, split ECC engine with rawnand controller in bindings and
> change to YAML schema.

I would like to pick-up patches 3, 7 and 10 and apply them in the mtd
tree as they look completely orthogonal with all the other (spi/DT)
changes, am I right?

Mark, is it okay for you?

Thanks,
Miquèl

> 
> Changes since V4:
>  - Split arm and arm64 dts patch for fix existing NAND controller node name.
> 
> Changes since V3:
>  - Correct mediatek,mtk-nfc.yaml dt-bindings.
> 
> Changes since V2:
>  - Change ECC err_mask value with GENMASK macro.
>  - Change snfi mediatek,rx-latch-latency to mediatek,rx-latch-latency-ns.
>  - Add a separate patch for DTS change.
>  - Move common description to top-level pattern properties.
>  - Drop redundant parts in dt-bindings.
> 
> Changes since V1:
>  - Use existing sample delay property.
>  - Add restricting for optional nfi_hclk.
>  - Improve and perfect dt-bindings documentation.
>  - Change existing node name to match NAND controller DT bingings.
>  - Fix issues reported by dt_binding_check.
>  - Fix issues reported by dtbs_check.
> 
> Xiangsheng Hou (10):
>   spi: mtk-snfi: Change default page format to setup default setting
>   spi: mtk-snfi: Add optional nfi_hclk which is needed for MT7986
>   mtd: nand: ecc-mtk: Add ECC support fot MT7986 IC
>   dt-bindings: spi: mtk-snfi: Add compatible for MT7986
>   spi: mtk-snfi: Add snfi sample delay and read latency adjustment
>   dt-bindings: spi: mtk-snfi: Add read latch latency property
>   dt-bindings: mtd: Split ECC engine with rawnand controller
>   arm64: dts: mediatek: Fix existing NAND controller node name
>   arm: dts: mediatek: Fix existing NAND controller node name
>   dt-bindings: mtd: mediatek,nand-ecc-engine: Add compatible for MT7986
> 
>  .../bindings/mtd/mediatek,mtk-nfc.yaml        | 155 +++++++++++++++
>  .../mtd/mediatek,nand-ecc-engine.yaml         |  63 +++++++
>  .../devicetree/bindings/mtd/mtk-nand.txt      | 176 ------------------
>  .../bindings/spi/mediatek,spi-mtk-snfi.yaml   |  54 +++++-
>  arch/arm/boot/dts/mt2701.dtsi                 |   2 +-
>  arch/arm64/boot/dts/mediatek/mt2712e.dtsi     |   2 +-
>  arch/arm64/boot/dts/mediatek/mt7622.dtsi      |   2 +-
>  drivers/mtd/nand/ecc-mtk.c                    |  28 ++-
>  drivers/spi/spi-mtk-snfi.c                    |  41 +++-
>  9 files changed, 330 insertions(+), 193 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml
>  create mode 100644 Documentation/devicetree/bindings/mtd/mediatek,nand-ecc-engine.yaml
>  delete mode 100644 Documentation/devicetree/bindings/mtd/mtk-nand.txt
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [RESEND PATCH v5 00/10] Add MediaTek MT7986 SPI NAND and ECC support

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 718 bytes --]

On Mon, Jan 30, 2023 at 05:11:45PM +0100, Miquel Raynal wrote:
> xiangsheng.hou@mediatek.com wrote on Mon, 30 Jan 2023 11:06:46 +0800:

> > This patch series add MediaTek MT7986 SPI NAND and ECC controller
> > support, split ECC engine with rawnand controller in bindings and
> > change to YAML schema.

> I would like to pick-up patches 3, 7 and 10 and apply them in the mtd
> tree as they look completely orthogonal with all the other (spi/DT)
> changes, am I right?

> Mark, is it okay for you?

That's fine, assuming there's no dependency issues.  Xiangsheng, it's
generally best to avoid mixing patches for multiple subsystems into a
single series when it's not needed since it makes merging things more
complex.

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [RESEND PATCH v5 00/10] Add MediaTek MT7986 SPI NAND and ECC support

[Miquel Raynal]

Hi Xiangsheng,

broonie@kernel.org wrote on Mon, 30 Jan 2023 16:18:56 +0000:

> On Mon, Jan 30, 2023 at 05:11:45PM +0100, Miquel Raynal wrote:
> > xiangsheng.hou@mediatek.com wrote on Mon, 30 Jan 2023 11:06:46 +0800:  
> 
> > > This patch series add MediaTek MT7986 SPI NAND and ECC controller
> > > support, split ECC engine with rawnand controller in bindings and
> > > change to YAML schema.  
> 
> > I would like to pick-up patches 3, 7 and 10 and apply them in the mtd
> > tree as they look completely orthogonal with all the other (spi/DT)
> > changes, am I right?  
> 
> > Mark, is it okay for you?  
> 
> That's fine, assuming there's no dependency issues.  Xiangsheng, it's
> generally best to avoid mixing patches for multiple subsystems into a
> single series when it's not needed since it makes merging things more
> complex.

Well, kernel test robot just reported an issue with a wrong file name,
so let's split the series. I now expect a series with the spi and
relevant changes (for Mark) and another series with the three mtd
patches -fixed, of course- which I'll apply on my side.

Thanks, Miquèl

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [RESEND PATCH v5 00/10] Add MediaTek MT7986 SPI NAND and ECC support

[Xiangsheng Hou (侯祥胜)]

Hi Miquel,

On Mon, 2023-01-30 at 17:33 +0100, Miquel Raynal wrote:
> Hi Xiangsheng,
> 
> broonie@kernel.org wrote on Mon, 30 Jan 2023 16:18:56 +0000:
> 
> > On Mon, Jan 30, 2023 at 05:11:45PM +0100, Miquel Raynal wrote:
> > > xiangsheng.hou@mediatek.com wrote on Mon, 30 Jan 2023 11:06:46
> > > +0800:  
> > > > This patch series add MediaTek MT7986 SPI NAND and ECC
> > > > controller
> > > > support, split ECC engine with rawnand controller in bindings
> > > > and
> > > > change to YAML schema.  
> > > I would like to pick-up patches 3, 7 and 10 and apply them in the
> > > mtd
> > > tree as they look completely orthogonal with all the other
> > > (spi/DT)
> > > changes, am I right?  
> > > Mark, is it okay for you?  
> > 
> > That's fine, assuming there's no dependency issues.  Xiangsheng,
> > it's
> > generally best to avoid mixing patches for multiple subsystems into
> > a
> > single series when it's not needed since it makes merging things
> > more
> > complex.
> 
> Well, kernel test robot just reported an issue with a wrong file
> name,
> so let's split the series. I now expect a series with the spi and
> relevant changes (for Mark) and another series with the three mtd
> patches -fixed, of course- which I'll apply on my side.

I will pick-up patches 3, 7, 10 and 8, 9 as a series for you, since
patches 8, 9 change the existing NAND controller node name. And another
patches as a series for Mark.

Thanks
Xiangsheng Hou


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel