* [RESEND PATCH] arm64: defconfig: enable drivers required by the Qualcomm SA8775P platform
@ 2023-02-09 10:35 Bartosz Golaszewski
2023-02-09 18:11 ` Eric Chanudet
2023-02-13 22:22 ` Bjorn Andersson
0 siblings, 2 replies; 7+ messages in thread
From: Bartosz Golaszewski @ 2023-02-09 10:35 UTC (permalink / raw)
To: Catalin Marinas, Will Deacon, Bjorn Andersson, Shawn Guo,
Arnd Bergmann, Krzysztof Kozlowski, Dmitry Baryshkov
Cc: linux-arm-kernel, linux-kernel, linux-arm-msm,
Bartosz Golaszewski
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Enable the pinctrl, GCC clock and interconnect drivers in order to allow
booting SA8775P boards. The drivers need to be built-in for QUPv3 and
subsequently UART console to work.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
Resending with tags collected and this time Cc'ing linux-arm-msm
arch/arm64/configs/defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 695c4e44d241..8e0ce9915f01 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -566,6 +566,7 @@ CONFIG_PINCTRL_QCM2290=y
CONFIG_PINCTRL_QCS404=y
CONFIG_PINCTRL_QDF2XXX=y
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+CONFIG_PINCTRL_SA8775P=y
CONFIG_PINCTRL_SC7180=y
CONFIG_PINCTRL_SC7280=y
CONFIG_PINCTRL_SC8180X=y
@@ -1378,6 +1379,7 @@ CONFIG_INTERCONNECT_QCOM_MSM8916=m
CONFIG_INTERCONNECT_QCOM_MSM8996=m
CONFIG_INTERCONNECT_QCOM_OSM_L3=m
CONFIG_INTERCONNECT_QCOM_QCS404=m
+CONFIG_INTERCONNECT_QCOM_SA8775P=y
CONFIG_INTERCONNECT_QCOM_SC7180=y
CONFIG_INTERCONNECT_QCOM_SC7280=y
CONFIG_INTERCONNECT_QCOM_SC8180X=y
--
2.37.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [RESEND PATCH] arm64: defconfig: enable drivers required by the Qualcomm SA8775P platform
2023-02-09 10:35 [RESEND PATCH] arm64: defconfig: enable drivers required by the Qualcomm SA8775P platform Bartosz Golaszewski
@ 2023-02-09 18:11 ` Eric Chanudet
2023-02-13 22:22 ` Bjorn Andersson
1 sibling, 0 replies; 7+ messages in thread
From: Eric Chanudet @ 2023-02-09 18:11 UTC (permalink / raw)
To: Bartosz Golaszewski
Cc: Catalin Marinas, Will Deacon, Bjorn Andersson, Shawn Guo,
Arnd Bergmann, Krzysztof Kozlowski, Dmitry Baryshkov,
linux-arm-kernel, linux-kernel, linux-arm-msm,
Bartosz Golaszewski
On Thu, Feb 09, 2023 at 11:35:31AM +0100, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
>
> Enable the pinctrl, GCC clock and interconnect drivers in order to allow
> booting SA8775P boards. The drivers need to be built-in for QUPv3 and
> subsequently UART console to work.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> Resending with tags collected and this time Cc'ing linux-arm-msm
>
> arch/arm64/configs/defconfig | 2 ++
> 1 file changed, 2 insertions(+)
Reviewed-by: Eric Chanudet <echanude@redhat.com>
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index 695c4e44d241..8e0ce9915f01 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -566,6 +566,7 @@ CONFIG_PINCTRL_QCM2290=y
> CONFIG_PINCTRL_QCS404=y
> CONFIG_PINCTRL_QDF2XXX=y
> CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
> +CONFIG_PINCTRL_SA8775P=y
> CONFIG_PINCTRL_SC7180=y
> CONFIG_PINCTRL_SC7280=y
> CONFIG_PINCTRL_SC8180X=y
> @@ -1378,6 +1379,7 @@ CONFIG_INTERCONNECT_QCOM_MSM8916=m
> CONFIG_INTERCONNECT_QCOM_MSM8996=m
> CONFIG_INTERCONNECT_QCOM_OSM_L3=m
> CONFIG_INTERCONNECT_QCOM_QCS404=m
> +CONFIG_INTERCONNECT_QCOM_SA8775P=y
> CONFIG_INTERCONNECT_QCOM_SC7180=y
> CONFIG_INTERCONNECT_QCOM_SC7280=y
> CONFIG_INTERCONNECT_QCOM_SC8180X=y
> --
> 2.37.2
>
--
Eric Chanudet
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [RESEND PATCH] arm64: defconfig: enable drivers required by the Qualcomm SA8775P platform
2023-02-09 10:35 [RESEND PATCH] arm64: defconfig: enable drivers required by the Qualcomm SA8775P platform Bartosz Golaszewski
2023-02-09 18:11 ` Eric Chanudet
@ 2023-02-13 22:22 ` Bjorn Andersson
1 sibling, 0 replies; 7+ messages in thread
From: Bjorn Andersson @ 2023-02-13 22:22 UTC (permalink / raw)
To: Catalin Marinas, Arnd Bergmann, Bartosz Golaszewski,
Bjorn Andersson, Krzysztof Kozlowski, Shawn Guo, Dmitry Baryshkov,
Will Deacon
Cc: linux-arm-msm, linux-kernel, linux-arm-kernel,
Bartosz Golaszewski
On Thu, 9 Feb 2023 11:35:31 +0100, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
>
> Enable the pinctrl, GCC clock and interconnect drivers in order to allow
> booting SA8775P boards. The drivers need to be built-in for QUPv3 and
> subsequently UART console to work.
>
>
> [...]
Applied, thanks!
[1/1] arm64: defconfig: enable drivers required by the Qualcomm SA8775P platform
commit: 687bcd03a047e65fcf12ae2b693043ee44acad4c
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 7+ messages in thread
* [RESEND PATCH] arm64: defconfig: enable drivers required by the Qualcomm SA8775P platform
@ 2023-02-02 8:59 Bartosz Golaszewski
2023-02-02 9:16 ` Krzysztof Kozlowski
2023-02-02 9:23 ` Dmitry Baryshkov
0 siblings, 2 replies; 7+ messages in thread
From: Bartosz Golaszewski @ 2023-02-02 8:59 UTC (permalink / raw)
To: Catalin Marinas, Will Deacon, Bjorn Andersson, Shawn Guo,
Arnd Bergmann, Krzysztof Kozlowski, Dmitry Baryshkov
Cc: linux-arm-kernel, linux-kernel, Bartosz Golaszewski
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Enable the pinctrl, GCC clock and interconnect drivers in order to allow
booting SA8775P boards. The drivers need to be built-in for QUPv3 and
subsequently UART console to work.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
All drivers are now in next so let's enable them.
arch/arm64/configs/defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 984553d55e17..998ca0e07689 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -560,6 +560,7 @@ CONFIG_PINCTRL_QCM2290=y
CONFIG_PINCTRL_QCS404=y
CONFIG_PINCTRL_QDF2XXX=y
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+CONFIG_PINCTRL_SA8775P=y
CONFIG_PINCTRL_SC7180=y
CONFIG_PINCTRL_SC7280=y
CONFIG_PINCTRL_SC8180X=y
@@ -1352,6 +1353,7 @@ CONFIG_INTERCONNECT_QCOM_MSM8916=m
CONFIG_INTERCONNECT_QCOM_MSM8996=m
CONFIG_INTERCONNECT_QCOM_OSM_L3=m
CONFIG_INTERCONNECT_QCOM_QCS404=m
+CONFIG_INTERCONNECT_QCOM_SA8775P=y
CONFIG_INTERCONNECT_QCOM_SC7180=y
CONFIG_INTERCONNECT_QCOM_SC7280=y
CONFIG_INTERCONNECT_QCOM_SC8180X=y
--
2.37.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [RESEND PATCH] arm64: defconfig: enable drivers required by the Qualcomm SA8775P platform
2023-02-02 8:59 Bartosz Golaszewski
@ 2023-02-02 9:16 ` Krzysztof Kozlowski
2023-02-02 9:23 ` Dmitry Baryshkov
1 sibling, 0 replies; 7+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-02 9:16 UTC (permalink / raw)
To: Bartosz Golaszewski, Catalin Marinas, Will Deacon,
Bjorn Andersson, Shawn Guo, Arnd Bergmann, Dmitry Baryshkov
Cc: linux-arm-kernel, linux-kernel, Bartosz Golaszewski
On 02/02/2023 09:59, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
>
> Enable the pinctrl, GCC clock and interconnect drivers in order to allow
> booting SA8775P boards. The drivers need to be built-in for QUPv3 and
> subsequently UART console to work.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> ---
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [RESEND PATCH] arm64: defconfig: enable drivers required by the Qualcomm SA8775P platform
2023-02-02 8:59 Bartosz Golaszewski
2023-02-02 9:16 ` Krzysztof Kozlowski
@ 2023-02-02 9:23 ` Dmitry Baryshkov
2023-02-02 9:33 ` Bartosz Golaszewski
1 sibling, 1 reply; 7+ messages in thread
From: Dmitry Baryshkov @ 2023-02-02 9:23 UTC (permalink / raw)
To: Bartosz Golaszewski, Catalin Marinas, Will Deacon,
Bjorn Andersson, Shawn Guo, Arnd Bergmann, Krzysztof Kozlowski
Cc: linux-arm-kernel, linux-kernel, Bartosz Golaszewski
On 02/02/2023 10:59, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
>
> Enable the pinctrl, GCC clock and interconnect drivers in order to allow
> booting SA8775P boards. The drivers need to be built-in for QUPv3 and
> subsequently UART console to work.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Note, you didn't include linux-arm-msm into the To/Cc, so this patch
might miss Bjorn's patchwork.
> ---
> All drivers are now in next so let's enable them.
>
> arch/arm64/configs/defconfig | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index 984553d55e17..998ca0e07689 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -560,6 +560,7 @@ CONFIG_PINCTRL_QCM2290=y
> CONFIG_PINCTRL_QCS404=y
> CONFIG_PINCTRL_QDF2XXX=y
> CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
> +CONFIG_PINCTRL_SA8775P=y
> CONFIG_PINCTRL_SC7180=y
> CONFIG_PINCTRL_SC7280=y
> CONFIG_PINCTRL_SC8180X=y
> @@ -1352,6 +1353,7 @@ CONFIG_INTERCONNECT_QCOM_MSM8916=m
> CONFIG_INTERCONNECT_QCOM_MSM8996=m
> CONFIG_INTERCONNECT_QCOM_OSM_L3=m
> CONFIG_INTERCONNECT_QCOM_QCS404=m
> +CONFIG_INTERCONNECT_QCOM_SA8775P=y
> CONFIG_INTERCONNECT_QCOM_SC7180=y
> CONFIG_INTERCONNECT_QCOM_SC7280=y
> CONFIG_INTERCONNECT_QCOM_SC8180X=y
--
With best wishes
Dmitry
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [RESEND PATCH] arm64: defconfig: enable drivers required by the Qualcomm SA8775P platform
2023-02-02 9:23 ` Dmitry Baryshkov
@ 2023-02-02 9:33 ` Bartosz Golaszewski
0 siblings, 0 replies; 7+ messages in thread
From: Bartosz Golaszewski @ 2023-02-02 9:33 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Bartosz Golaszewski, Catalin Marinas, Will Deacon,
Bjorn Andersson, Shawn Guo, Arnd Bergmann, Krzysztof Kozlowski,
linux-arm-kernel, linux-kernel
On Thu, 2 Feb 2023 at 10:23, Dmitry Baryshkov
<dmitry.baryshkov@linaro.org> wrote:
>
> On 02/02/2023 10:59, Bartosz Golaszewski wrote:
> > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> >
> > Enable the pinctrl, GCC clock and interconnect drivers in order to allow
> > booting SA8775P boards. The drivers need to be built-in for QUPv3 and
> > subsequently UART console to work.
> >
> > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>
> Note, you didn't include linux-arm-msm into the To/Cc, so this patch
> might miss Bjorn's patchwork.
>
Thanks for the heads-up, I'll resend it if he doesn't pick it up in
the following days.
Bart
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2023-02-13 22:22 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-02-09 10:35 [RESEND PATCH] arm64: defconfig: enable drivers required by the Qualcomm SA8775P platform Bartosz Golaszewski
2023-02-09 18:11 ` Eric Chanudet
2023-02-13 22:22 ` Bjorn Andersson
-- strict thread matches above, loose matches on Subject: below --
2023-02-02 8:59 Bartosz Golaszewski
2023-02-02 9:16 ` Krzysztof Kozlowski
2023-02-02 9:23 ` Dmitry Baryshkov
2023-02-02 9:33 ` Bartosz Golaszewski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).