From: Alexandre Mergnat <amergnat@baylibre.com>
To: Daniel Vetter <daniel@ffwll.ch>, CK Hu <ck.hu@mediatek.com>,
Jitao Shi <jitao.shi@mediatek.com>,
Thierry Reding <thierry.reding@gmail.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Sam Ravnborg <sam@ravnborg.org>, Rob Herring <robh+dt@kernel.org>,
Uwe Kleine-König <u.kleine-koenig@pengutronix.de>,
Chun-Kuang Hu <chunkuang.hu@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
David Airlie <airlied@gmail.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Xinlei Lee <xinlei.lee@mediatek.com>
Cc: Guillaume La Roque <glaroque@baylibre.com>,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org,
Alexandre Mergnat <amergnat@baylibre.com>,
dri-devel@lists.freedesktop.org,
Fabien Parent <fparent@baylibre.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
linux-pwm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 21/21] panel: startek-kd070fhfid015: add support of this display
Date: Thu, 09 Mar 2023 15:23:10 +0100 [thread overview]
Message-ID: <20230220-display-v1-21-45cbc68e188b@baylibre.com> (raw)
In-Reply-To: <20230220-display-v1-0-45cbc68e188b@baylibre.com>
From: Guillaume La Roque <glaroque@baylibre.com>
This driver support the Startek KD070FHFID015, which is a 7-inch TFT LCD
display using MIPI DSI interface.
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
---
drivers/gpu/drm/panel/Kconfig | 12 +
drivers/gpu/drm/panel/Makefile | 1 +
.../gpu/drm/panel/panel-startek-kd070fhfid015.c | 483 +++++++++++++++++++++
3 files changed, 496 insertions(+)
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 737edcdf9eef..3fccf025013b 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -666,6 +666,17 @@ config DRM_PANEL_SONY_TULIP_TRULY_NT35521
NT35521 1280x720 video mode panel as found on Sony Xperia M4
Aqua phone.
+config DRM_PANEL_STARTEK_KD070FHFID015
+ tristate "STARTEK KD070FHFID015 panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel
+ based on RENESAS-R69429 controller. The pannel is a 7-inch TFT LCD display
+ with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
+ the host, a built-in LED backlight and touch controller.
+
config DRM_PANEL_TDO_TL070WSH30
tristate "TDO TL070WSH30 DSI panel"
depends on OF
@@ -736,4 +747,5 @@ config DRM_PANEL_XINPENG_XPP055C272
Say Y here if you want to enable support for the Xinpeng
XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
system interfaces.
+
endmenu
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index f8f9d9f6a307..35771fc51187 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -67,6 +67,7 @@ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o
obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
obj-$(CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521) += panel-sony-tulip-truly-nt35521.o
+obj-$(CONFIG_DRM_PANEL_STARTEK_KD070FHFID015) += panel-startek-kd070fhfid015.o
obj-$(CONFIG_DRM_PANEL_TDO_TL070WSH30) += panel-tdo-tl070wsh30.o
obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
diff --git a/drivers/gpu/drm/panel/panel-startek-kd070fhfid015.c b/drivers/gpu/drm/panel/panel-startek-kd070fhfid015.c
new file mode 100644
index 000000000000..88466bf6428d
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-startek-kd070fhfid015.c
@@ -0,0 +1,483 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 InforceComputing
+ * Copyright (C) 2016 Linaro Ltd
+ * Copyright (C) 2023 BayLibre, SAS
+ *
+ * Author:
+ * - Vinay Simha BN <simhavcs@gmail.com>
+ * - Sumit Semwal <sumit.semwal@linaro.org>
+ * - Guillaume La Roque <glaroque@baylibre.com>
+ *
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_crtc.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+#define DSI_REG_MCAP 0xB0
+#define DSI_REG_IS 0xB3 /* Interface Setting */
+#define DSI_REG_IIS 0xB4 /* Interface ID Setting */
+#define DSI_REG_CTRL 0xB6
+
+struct stk_panel {
+ struct drm_panel base;
+ struct mipi_dsi_device *dsi;
+
+ struct gpio_desc *enable_gpio;
+ struct gpio_desc *reset_gpio;
+ struct gpio_desc *dcdc_en_gpio;
+ struct backlight_device *backlight;
+ struct regulator *iovcc_supply;
+ struct regulator *power_supply;
+
+ bool prepared;
+ bool enabled;
+
+ const struct drm_display_mode *mode;
+};
+
+static inline struct stk_panel *to_stk_panel(struct drm_panel *panel)
+{
+ return container_of(panel, struct stk_panel, base);
+}
+
+static int stk_panel_init(struct stk_panel *stk)
+{
+ struct mipi_dsi_device *dsi = stk->dsi;
+ struct device *dev = &stk->dsi->dev;
+ int ret;
+
+ ret = mipi_dsi_dcs_soft_reset(dsi);
+ if (ret < 0) {
+ dev_err(dev, "failed to mipi_dsi_dcs_soft_reset: %d\n", ret);
+ return ret;
+ }
+ mdelay(5);
+
+ ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+ if (ret < 0) {
+ dev_err(dev, "failed to set exit sleep mode: %d\n", ret);
+ return ret;
+ }
+ msleep(120);
+
+ ret = mipi_dsi_generic_write(dsi, (u8[]){DSI_REG_MCAP, 0x04}, 2);
+ if (ret < 0) {
+ dev_err(dev, "failed to set mcap: %d\n", ret);
+ return ret;
+ }
+ /* Interface setting, video mode */
+ ret = mipi_dsi_generic_write(dsi,
+ (u8[]){DSI_REG_IS, 0x14, 0x08, 0x00, 0x22, 0x00}, 6);
+ if (ret < 0) {
+ dev_err(dev, "failed to set display interface setting: %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = mipi_dsi_generic_write(dsi, (u8[]){DSI_REG_IIS, 0x0C, 0x00}, 3);
+ if (ret < 0) {
+ dev_err(dev, "failed to set Interface ID setting: %d\n", ret);
+ return ret;
+ }
+
+ ret = mipi_dsi_generic_write(dsi, (u8[]){ DSI_REG_CTRL, 0x3A, 0xD3}, 3);
+ if (ret < 0) {
+ dev_err(dev, "failed to set DSI control: %d\n", ret);
+ return ret;
+ }
+
+ ret = mipi_dsi_dcs_set_display_brightness(dsi, 0x77);
+ if (ret < 0) {
+ dev_err(dev, "failed to write display brightness: %d\n", ret);
+ return ret;
+ }
+
+ ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY,
+ (u8[]){ MIPI_DCS_WRITE_MEMORY_START }, 1);
+ if (ret < 0) {
+ dev_err(dev, "failed to write control display: %d\n", ret);
+ return ret;
+ }
+
+ ret = mipi_dsi_dcs_set_pixel_format(dsi, 0x77);
+ if (ret < 0) {
+ dev_err(dev, "failed to set pixel format: %d\n", ret);
+ return ret;
+ }
+
+ ret = mipi_dsi_dcs_set_column_address(dsi, 0, stk->mode->hdisplay - 1);
+ if (ret < 0) {
+ dev_err(dev, "failed to set column address: %d\n", ret);
+ return ret;
+ }
+
+ ret = mipi_dsi_dcs_set_page_address(dsi, 0, stk->mode->vdisplay - 1);
+ if (ret < 0) {
+ dev_err(dev, "failed to set page address: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int stk_panel_on(struct stk_panel *stk)
+{
+ struct mipi_dsi_device *dsi = stk->dsi;
+ struct device *dev = &stk->dsi->dev;
+ int ret;
+
+ ret = mipi_dsi_dcs_set_display_on(dsi);
+ if (ret < 0)
+ dev_err(dev, "failed to set display on: %d\n", ret);
+
+ mdelay(20);
+
+ return ret;
+}
+
+static void stk_panel_off(struct stk_panel *stk)
+{
+ struct mipi_dsi_device *dsi = stk->dsi;
+ struct device *dev = &stk->dsi->dev;
+ int ret;
+
+ dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+ ret = mipi_dsi_dcs_set_display_off(dsi);
+ if (ret < 0)
+ dev_err(dev, "failed to set display off: %d\n", ret);
+
+ ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+ if (ret < 0)
+ dev_err(dev, "failed to enter sleep mode: %d\n", ret);
+
+ msleep(100);
+}
+
+static int stk_panel_disable(struct drm_panel *panel)
+{
+ struct stk_panel *stk = to_stk_panel(panel);
+
+ if (!stk->enabled)
+ return 0;
+
+ backlight_disable(stk->backlight);
+
+ stk->enabled = false;
+
+ return 0;
+}
+
+static int stk_panel_unprepare(struct drm_panel *panel)
+{
+ struct stk_panel *stk = to_stk_panel(panel);
+
+ if (!stk->prepared)
+ return 0;
+
+ stk_panel_off(stk);
+ regulator_disable(stk->iovcc_supply);
+ regulator_disable(stk->power_supply);
+ gpiod_set_value(stk->reset_gpio, 0);
+ gpiod_set_value(stk->dcdc_en_gpio, 1);
+
+ stk->prepared = false;
+
+ return 0;
+}
+
+static int stk_panel_prepare(struct drm_panel *panel)
+{
+ struct stk_panel *stk = to_stk_panel(panel);
+ struct device *dev = &stk->dsi->dev;
+ int ret;
+
+ if (stk->prepared)
+ return 0;
+
+ gpiod_set_value(stk->reset_gpio, 0);
+ gpiod_set_value(stk->dcdc_en_gpio, 0);
+ gpiod_set_value(stk->enable_gpio, 0);
+ ret = regulator_enable(stk->iovcc_supply);
+ if (ret < 0)
+ return ret;
+ mdelay(8);
+ ret = regulator_enable(stk->power_supply);
+ if (ret < 0)
+ goto iovccoff;
+ mdelay(20);
+ gpiod_set_value(stk->dcdc_en_gpio, 1);
+ mdelay(20);
+ gpiod_set_value(stk->reset_gpio, 1);
+ mdelay(10);
+
+ ret = stk_panel_init(stk);
+ if (ret < 0) {
+ dev_err(dev, "failed to init panel: %d\n", ret);
+ goto poweroff;
+ }
+
+ ret = stk_panel_on(stk);
+ if (ret < 0) {
+ dev_err(dev, "failed to set panel on: %d\n", ret);
+ goto poweroff;
+ }
+
+ stk->prepared = true;
+
+ return 0;
+
+poweroff:
+ regulator_disable(stk->power_supply);
+iovccoff:
+ regulator_disable(stk->iovcc_supply);
+ gpiod_set_value(stk->enable_gpio, 0);
+ gpiod_set_value(stk->reset_gpio, 0);
+ gpiod_set_value(stk->dcdc_en_gpio, 0);
+
+ return ret;
+}
+
+static int stk_panel_enable(struct drm_panel *panel)
+{
+ struct stk_panel *stk = to_stk_panel(panel);
+
+ if (stk->enabled)
+ return 0;
+
+ backlight_enable(stk->backlight);
+
+ stk->enabled = true;
+
+ return 0;
+}
+
+static const struct drm_display_mode default_mode = {
+ .clock = 163204,
+ .hdisplay = 1200,
+ .hsync_start = 1200 + 144,
+ .hsync_end = 1200 + 144 + 16,
+ .htotal = 1200 + 144 + 16 + 45, // 1405
+ .vdisplay = 1920,
+ .vsync_start = 1920 + 8,
+ .vsync_end = 1920 + 8 + 4,
+ .vtotal = 1920 + 8 + 4 + 4, // 1936
+};
+
+static int stk_panel_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(connector->dev, &default_mode);
+ if (!mode) {
+ dev_err(panel->dev, "failed to add mode %ux%ux@%u\n",
+ default_mode.hdisplay, default_mode.vdisplay,
+ drm_mode_vrefresh(&default_mode));
+ return -ENOMEM;
+ }
+
+ drm_mode_set_name(mode);
+
+ drm_mode_probed_add(connector, mode);
+
+ connector->display_info.width_mm = 95;
+ connector->display_info.height_mm = 151;
+
+ return 1;
+}
+
+static int dsi_dcs_bl_get_brightness(struct backlight_device *bl)
+{
+ struct mipi_dsi_device *dsi = bl_get_data(bl);
+ int ret;
+ u16 brightness = bl->props.brightness;
+
+ dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+ ret = mipi_dsi_dcs_get_display_brightness(dsi, &brightness);
+ if (ret < 0)
+ return ret;
+ dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+ return brightness & 0xff;
+}
+
+static int dsi_dcs_bl_update_status(struct backlight_device *bl)
+{
+ struct mipi_dsi_device *dsi = bl_get_data(bl);
+ struct device *dev = &dsi->dev;
+ int ret;
+
+ dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+ ret = mipi_dsi_dcs_set_display_brightness(dsi, bl->props.brightness);
+ if (ret < 0) {
+ dev_err(dev, "failed to set DSI control: %d\n", ret);
+ return ret;
+ }
+
+ dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+ return 0;
+}
+
+static const struct backlight_ops dsi_bl_ops = {
+ .update_status = dsi_dcs_bl_update_status,
+ .get_brightness = dsi_dcs_bl_get_brightness,
+};
+
+static struct backlight_device *
+drm_panel_create_dsi_backlight(struct mipi_dsi_device *dsi)
+{
+ struct device *dev = &dsi->dev;
+ struct backlight_properties props;
+
+ memset(&props, 0, sizeof(props));
+ props.type = BACKLIGHT_RAW;
+ props.brightness = 255;
+ props.max_brightness = 255;
+
+ return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
+ &dsi_bl_ops, &props);
+}
+
+static const struct drm_panel_funcs stk_panel_funcs = {
+ .disable = stk_panel_disable,
+ .unprepare = stk_panel_unprepare,
+ .prepare = stk_panel_prepare,
+ .enable = stk_panel_enable,
+ .get_modes = stk_panel_get_modes,
+};
+
+static const struct of_device_id stk_of_match[] = {
+ { .compatible = "startek,kd070fhfid015", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, stk_of_match);
+
+static int stk_panel_add(struct stk_panel *stk)
+{
+ struct device *dev = &stk->dsi->dev;
+ int ret;
+
+ stk->mode = &default_mode;
+
+ stk->iovcc_supply = devm_regulator_get(dev, "iovcc");
+ if (IS_ERR(stk->iovcc_supply))
+ return PTR_ERR(stk->iovcc_supply);
+
+ stk->power_supply = devm_regulator_get(dev, "power");
+ if (IS_ERR(stk->power_supply))
+ return PTR_ERR(stk->power_supply);
+
+ stk->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(stk->reset_gpio)) {
+ ret = PTR_ERR(stk->reset_gpio);
+ dev_err(dev, "cannot get reset-gpios %d\n", ret);
+ return ret;
+ }
+
+ stk->dcdc_en_gpio = devm_gpiod_get(dev, "dcdc", GPIOD_OUT_LOW);
+ if (IS_ERR(stk->dcdc_en_gpio)) {
+ ret = PTR_ERR(stk->dcdc_en_gpio);
+ dev_err(dev, "cannot get dcdc-en-gpio %d\n", ret);
+ return ret;
+ }
+
+ stk->backlight = drm_panel_create_dsi_backlight(stk->dsi);
+ if (IS_ERR(stk->backlight)) {
+ ret = PTR_ERR(stk->backlight);
+ dev_err(dev, "failed to register backlight %d\n", ret);
+ return ret;
+ }
+
+ drm_panel_init(&stk->base, &stk->dsi->dev, &stk_panel_funcs,
+ DRM_MODE_CONNECTOR_DSI);
+
+ drm_panel_add(&stk->base);
+
+ return 0;
+}
+
+static void stk_panel_del(struct stk_panel *stk)
+{
+ if (stk->base.dev)
+ drm_panel_remove(&stk->base);
+}
+
+static int stk_panel_probe(struct mipi_dsi_device *dsi)
+{
+ struct stk_panel *stk;
+ int ret;
+
+ dsi->lanes = 4;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->mode_flags = (MIPI_DSI_MODE_VIDEO |
+ MIPI_DSI_MODE_LPM);
+
+ stk = devm_kzalloc(&dsi->dev, sizeof(*stk), GFP_KERNEL);
+ if (!stk)
+ return -ENOMEM;
+
+ mipi_dsi_set_drvdata(dsi, stk);
+
+ stk->dsi = dsi;
+
+ ret = stk_panel_add(stk);
+ if (ret < 0)
+ return ret;
+
+ return mipi_dsi_attach(dsi);
+}
+
+static void stk_panel_remove(struct mipi_dsi_device *dsi)
+{
+ struct stk_panel *stk = mipi_dsi_get_drvdata(dsi);
+ int err;
+
+ err = stk_panel_disable(&stk->base);
+ if (err < 0)
+ dev_err(&dsi->dev, "failed to disable panel: %d\n", err);
+
+ err = mipi_dsi_detach(dsi);
+ if (err < 0)
+ dev_err(&dsi->dev, "failed to detach from DSI host: %d\n",
+ err);
+
+ stk_panel_del(stk);
+}
+
+static void stk_panel_shutdown(struct mipi_dsi_device *dsi)
+{
+ struct stk_panel *stk = mipi_dsi_get_drvdata(dsi);
+
+ stk_panel_disable(&stk->base);
+}
+
+static struct mipi_dsi_driver stk_panel_driver = {
+ .driver = {
+ .name = "panel-startek-kd070fhfid015",
+ .of_match_table = stk_of_match,
+ },
+ .probe = stk_panel_probe,
+ .remove = stk_panel_remove,
+ .shutdown = stk_panel_shutdown,
+};
+module_mipi_dsi_driver(stk_panel_driver);
+
+MODULE_AUTHOR("Guillaume La Roque <glaroque@baylibre.com>");
+MODULE_DESCRIPTION("STARTEK KD070FHFID015");
+MODULE_LICENSE("GPL");
--
b4 0.10.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-03-09 14:48 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-09 14:22 [PATCH 00/21] Add display support for the MT8365-EVK board Alexandre Mergnat
2023-03-09 14:22 ` [PATCH 01/21] dt-bindings: display: mediatek: aal: add binding for MT8365 SoC Alexandre Mergnat
2023-03-10 8:41 ` Krzysztof Kozlowski
2023-03-13 15:02 ` Chun-Kuang Hu
2023-03-31 14:55 ` Matthias Brugger
2023-04-03 3:25 ` Chun-Kuang Hu
2023-03-09 14:22 ` [PATCH 02/21] dt-bindings: display: mediatek: ccorr: " Alexandre Mergnat
2023-03-10 8:29 ` Krzysztof Kozlowski
2023-03-13 14:54 ` Chun-Kuang Hu
2023-03-09 14:22 ` [PATCH 03/21] dt-bindings: display: mediatek: color: " Alexandre Mergnat
2023-03-10 8:35 ` Krzysztof Kozlowski
2023-03-13 14:58 ` Chun-Kuang Hu
2023-03-09 14:22 ` [PATCH 04/21] dt-bindings: display: mediatek: dither: " Alexandre Mergnat
2023-03-10 8:35 ` Krzysztof Kozlowski
2023-03-13 14:59 ` Chun-Kuang Hu
2023-03-09 14:22 ` [PATCH 05/21] dt-bindings: display: mediatek: dsi: " Alexandre Mergnat
2023-03-10 8:35 ` Krzysztof Kozlowski
2023-03-13 15:00 ` Chun-Kuang Hu
2023-03-09 14:22 ` [PATCH 06/21] dt-bindings: display: mediatek: dpi: add power-domains property Alexandre Mergnat
2023-03-09 14:22 ` [PATCH 07/21] dt-bindings: display: mediatek: dpi: add binding for MT8365 Alexandre Mergnat
2023-03-10 8:38 ` Krzysztof Kozlowski
2023-03-13 15:17 ` Chun-Kuang Hu
2023-03-15 9:26 ` Alexandre Mergnat
2023-03-09 14:22 ` [PATCH 08/21] dt-bindings: display: mediatek: gamma: add binding for MT8365 SoC Alexandre Mergnat
2023-03-10 8:38 ` Krzysztof Kozlowski
2023-03-13 15:07 ` Chun-Kuang Hu
2023-03-09 14:22 ` [PATCH 09/21] dt-bindings: display: mediatek: ovl: " Alexandre Mergnat
2023-03-10 8:38 ` Krzysztof Kozlowski
2023-03-13 15:08 ` Chun-Kuang Hu
2023-03-09 14:22 ` [PATCH 10/21] dt-bindings: display: mediatek: rdma: " Alexandre Mergnat
2023-03-10 8:38 ` Krzysztof Kozlowski
2023-03-13 15:09 ` Chun-Kuang Hu
2023-03-09 14:23 ` [PATCH 11/21] dt-bindings: display: pannel: add startek kd070fhfid015 binding documentation Alexandre Mergnat
2023-03-09 14:23 ` [PATCH 12/21] dt-bindings: pwm: add power-domains property Alexandre Mergnat
2023-03-09 14:23 ` [PATCH 13/21] dt-bindings: pwm: add binding for mt8365 SoC Alexandre Mergnat
2023-03-10 8:38 ` Krzysztof Kozlowski
2023-03-09 14:23 ` [PATCH 14/21] dt-bindings: soc: mediatek: specify which compatible requires clocks property Alexandre Mergnat
2023-03-31 14:42 ` Matthias Brugger
2023-03-09 14:23 ` [PATCH 15/21] dt-bindings: soc: mediatek: add display mutex for MT8365 SoC Alexandre Mergnat
2023-03-10 8:39 ` Krzysztof Kozlowski
2023-03-15 8:01 ` Alexandre Mergnat
2023-03-15 8:17 ` Alexandre Mergnat
2023-03-15 13:17 ` Krzysztof Kozlowski
2023-03-15 13:22 ` Krzysztof Kozlowski
2023-03-31 17:51 ` Matthias Brugger
2023-03-09 14:23 ` [PATCH 16/21] arm64: dts: mediatek: add display blocks support for the " Alexandre Mergnat
2023-03-09 14:23 ` [PATCH 17/21] arm64: dts: mediatek: add display support for mt8365-evk Alexandre Mergnat
2023-03-09 14:23 ` [PATCH 18/21] drm/mediatek: dsi: Improves the DSI lane setup robustness Alexandre Mergnat
2023-03-27 15:37 ` Chun-Kuang Hu
2023-03-09 14:23 ` [PATCH 19/21] drm/mediatek: dpi: add support for dpi clock Alexandre Mergnat
2023-03-13 15:21 ` Chun-Kuang Hu
2023-03-15 9:35 ` Alexandre Mergnat
2023-03-15 14:17 ` Chun-Kuang Hu
2023-03-09 14:23 ` [PATCH 20/21] drm/mediatek: add MT8365 SoC support Alexandre Mergnat
2023-03-09 14:23 ` Alexandre Mergnat [this message]
2023-03-09 14:51 ` [PATCH 21/21] panel: startek-kd070fhfid015: add support of this display Neil Armstrong
2023-03-15 15:59 ` Alexandre Mergnat
2023-03-15 17:12 ` neil.armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230220-display-v1-21-45cbc68e188b@baylibre.com \
--to=amergnat@baylibre.com \
--cc=airlied@gmail.com \
--cc=chunkuang.hu@kernel.org \
--cc=ck.hu@mediatek.com \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=fparent@baylibre.com \
--cc=glaroque@baylibre.com \
--cc=jitao.shi@mediatek.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pwm@vger.kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=neil.armstrong@linaro.org \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
--cc=xinlei.lee@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox