* [PATCH] Revert "arm64: dts: ls1028a: sl28: get MAC addresses from VPD"
@ 2023-02-07 13:10 Michael Walle
2023-03-06 3:10 ` Shawn Guo
0 siblings, 1 reply; 2+ messages in thread
From: Michael Walle @ 2023-02-07 13:10 UTC (permalink / raw)
To: Shawn Guo, Li Yang, Rob Herring, Krzysztof Kozlowski
Cc: linux-arm-kernel, devicetree, linux-kernel, Michael Walle
With commit b203e6f1e833 ("arm64: dts: ls1028a: sl28: get MAC addresses
from VPD"), the network adapter now depends on the nvmem device to be
present, which isn't the case and thus breaks networking on this board.
Revert it.
Fixes: b203e6f1e833 ("arm64: dts: ls1028a: sl28: get MAC addresses from VPD")
Signed-off-by: Michael Walle <michael@walle.cc>
---
Shawn, unfortunately, the driver was NAKed, so this will break our
KernelCI setup. Alternatively, the original commit can just be dropped
from your tree, if that's how you do things like this. I've learned that
the correct way is to get the driver in and then in the next release enable
the driver and add it to the dts. Next time :)
---
.../fsl-ls1028a-kontron-kbox-a-230-ls.dts | 12 ------------
.../freescale/fsl-ls1028a-kontron-sl28-var1.dts | 2 --
.../freescale/fsl-ls1028a-kontron-sl28-var2.dts | 8 --------
.../freescale/fsl-ls1028a-kontron-sl28-var4.dts | 2 --
.../dts/freescale/fsl-ls1028a-kontron-sl28.dts | 17 -----------------
5 files changed, 41 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
index af9194eca556..73eb6061c73e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
@@ -56,14 +56,10 @@ qsgmii_phy3: ethernet-phy@10 {
};
&enetc_port2 {
- nvmem-cells = <&base_mac_address 2>;
- nvmem-cell-names = "mac-address";
status = "okay";
};
&enetc_port3 {
- nvmem-cells = <&base_mac_address 3>;
- nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -84,8 +80,6 @@ &mscc_felix_port0 {
managed = "in-band-status";
phy-handle = <&qsgmii_phy0>;
phy-mode = "qsgmii";
- nvmem-cells = <&base_mac_address 4>;
- nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -94,8 +88,6 @@ &mscc_felix_port1 {
managed = "in-band-status";
phy-handle = <&qsgmii_phy1>;
phy-mode = "qsgmii";
- nvmem-cells = <&base_mac_address 5>;
- nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -104,8 +96,6 @@ &mscc_felix_port2 {
managed = "in-band-status";
phy-handle = <&qsgmii_phy2>;
phy-mode = "qsgmii";
- nvmem-cells = <&base_mac_address 6>;
- nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -114,8 +104,6 @@ &mscc_felix_port3 {
managed = "in-band-status";
phy-handle = <&qsgmii_phy3>;
phy-mode = "qsgmii";
- nvmem-cells = <&base_mac_address 7>;
- nvmem-cell-names = "mac-address";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
index 1f34c7553459..7cd29ab970d9 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
@@ -55,7 +55,5 @@ &enetc_port0 {
&enetc_port1 {
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
- nvmem-cells = <&base_mac_address 0>;
- nvmem-cell-names = "mac-address";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
index aac41192caa1..113b1df74bf8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
@@ -36,14 +36,10 @@ &enetc_port0 {
};
&enetc_port2 {
- nvmem-cells = <&base_mac_address 2>;
- nvmem-cell-names = "mac-address";
status = "okay";
};
&enetc_port3 {
- nvmem-cells = <&base_mac_address 3>;
- nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -56,8 +52,6 @@ &mscc_felix_port0 {
managed = "in-band-status";
phy-handle = <&phy0>;
phy-mode = "sgmii";
- nvmem-cells = <&base_mac_address 0>;
- nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -66,8 +60,6 @@ &mscc_felix_port1 {
managed = "in-band-status";
phy-handle = <&phy1>;
phy-mode = "sgmii";
- nvmem-cells = <&base_mac_address 1>;
- nvmem-cell-names = "mac-address";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
index a4421db3784e..9b5e92fb753e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
@@ -43,7 +43,5 @@ vddh: vddh-regulator {
&enetc_port1 {
phy-handle = <&phy1>;
phy-mode = "rgmii-id";
- nvmem-cells = <&base_mac_address 1>;
- nvmem-cell-names = "mac-address";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index 8b65af4a7147..4ab17b984b03 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -92,8 +92,6 @@ &enetc_port0 {
phy-handle = <&phy0>;
phy-mode = "sgmii";
managed = "in-band-status";
- nvmem-cells = <&base_mac_address 0>;
- nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -156,21 +154,6 @@ partition@3e0000 {
label = "bootloader environment";
};
};
-
- otp-1 {
- compatible = "user-otp";
-
- nvmem-layout {
- compatible = "kontron,sl28-vpd";
-
- serial_number: serial-number {
- };
-
- base_mac_address: base-mac-address {
- #nvmem-cell-cells = <1>;
- };
- };
- };
};
};
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] Revert "arm64: dts: ls1028a: sl28: get MAC addresses from VPD"
2023-02-07 13:10 [PATCH] Revert "arm64: dts: ls1028a: sl28: get MAC addresses from VPD" Michael Walle
@ 2023-03-06 3:10 ` Shawn Guo
0 siblings, 0 replies; 2+ messages in thread
From: Shawn Guo @ 2023-03-06 3:10 UTC (permalink / raw)
To: Michael Walle
Cc: Li Yang, Rob Herring, Krzysztof Kozlowski, linux-arm-kernel,
devicetree, linux-kernel
On Tue, Feb 07, 2023 at 02:10:20PM +0100, Michael Walle wrote:
> With commit b203e6f1e833 ("arm64: dts: ls1028a: sl28: get MAC addresses
> from VPD"), the network adapter now depends on the nvmem device to be
> present, which isn't the case and thus breaks networking on this board.
> Revert it.
>
> Fixes: b203e6f1e833 ("arm64: dts: ls1028a: sl28: get MAC addresses from VPD")
> Signed-off-by: Michael Walle <michael@walle.cc>
Applied!
> ---
> Shawn, unfortunately, the driver was NAKed, so this will break our
> KernelCI setup. Alternatively, the original commit can just be dropped
> from your tree, if that's how you do things like this. I've learned that
> the correct way is to get the driver in and then in the next release enable
> the driver and add it to the dts. Next time :)
Yes, please follow the correct way!
Shawn
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-03-06 3:12 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-02-07 13:10 [PATCH] Revert "arm64: dts: ls1028a: sl28: get MAC addresses from VPD" Michael Walle
2023-03-06 3:10 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).