From: Philippe Schenker <dev@pschenker.ch>
To: devicetree@vger.kernel.org, Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>
Cc: NXP Linux Team <linux-imx@nxp.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Frank Rowand <frowand.list@gmail.com>,
linux-arm-kernel@lists.infradead.org,
Fabio Estevam <festevam@gmail.com>,
Philippe Schenker <philippe.schenker@toradex.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v1 07/25] arm64: dts: colibri-imx8x: Split pinctrl_hog1
Date: Wed, 8 Mar 2023 13:52:41 +0100 [thread overview]
Message-ID: <20230308125300.58244-8-dev@pschenker.ch> (raw)
In-Reply-To: <20230308125300.58244-1-dev@pschenker.ch>
From: Philippe Schenker <philippe.schenker@toradex.com>
Split pinctrl_hog1 into a second group so CSI_MCLK can be muxed to a
gpio on its own.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---
arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
index e1b907b7a85d..432449359625 100644
--- a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
@@ -119,7 +119,8 @@ &usdhc2 {
&iomuxc {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ext_io0>, <&pinctrl_hog0>, <&pinctrl_hog1>;
+ pinctrl-0 = <&pinctrl_ext_io0>, <&pinctrl_hog0>, <&pinctrl_hog1>,
+ <&pinctrl_hog2>;
/* On-module touch pen-down interrupt */
pinctrl_ad7879_int: ad7879intgrp {
@@ -253,6 +254,10 @@ pinctrl_hog1: hog1grp {
<IMX8QXP_QSPI0A_SCLK_LSIO_GPIO3_IO16 0x20>; /* SODIMM 93 */
};
+ pinctrl_hog2: hog2grp {
+ fsl,pins = <IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01 0x20>; /* SODIMM 75 */
+ };
+
/*
* This pin is used in the SCFW as a UART. Using it from
* Linux would require rewritting the SCFW board file.
--
2.39.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-03-08 12:54 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-08 12:52 [PATCH v1 00/25] Update Colibri iMX8X Devicetrees Philippe Schenker
2023-03-08 12:52 ` [PATCH v1 01/25] arm64: dts: colibri-imx8x: Prepare for qxp and dx variants Philippe Schenker
2023-03-08 14:33 ` Krzysztof Kozlowski
2023-03-08 15:21 ` Philippe Schenker
2023-03-08 12:52 ` [PATCH v1 02/25] arm64: dts: colibri-imx8x: Update spdx license Philippe Schenker
2023-03-08 12:52 ` [PATCH v1 03/25] arm64: dts: colibri-imx8x: Sort properties Philippe Schenker
2023-03-08 12:57 ` Krzysztof Kozlowski
2023-03-08 13:29 ` Philippe Schenker
2023-03-08 14:32 ` Krzysztof Kozlowski
2023-03-08 14:50 ` Philippe Schenker
2023-03-08 16:09 ` Krzysztof Kozlowski
2023-03-09 12:19 ` Francesco Dolcini
2023-03-14 8:17 ` Shawn Guo
2023-03-08 12:52 ` [PATCH v1 04/25] arm64: dts: colibri-imx8x: Use new bracket format Philippe Schenker
2023-03-08 12:52 ` [PATCH v1 05/25] arm64: dts: colibri-imx8x: Add atmel pinctrl groups Philippe Schenker
2023-03-08 12:52 ` [PATCH v1 06/25] arm64: dts: colibri-imx8x: Add pinctrl group for csi_mclk Philippe Schenker
2023-03-08 12:52 ` Philippe Schenker [this message]
2023-03-08 12:52 ` [PATCH v1 08/25] arm64: dts: colibri-imx8x: Correct pull on lcdif Philippe Schenker
2023-03-08 12:52 ` [PATCH v1 09/25] arm64: dts: colibri-imx8x: Add separate pinctrl group for cs2 Philippe Schenker
2023-03-08 12:52 ` [PATCH v1 10/25] arm64: dts: colibri-imx8x: Add pinctrl group for hdmi hpd Philippe Schenker
2023-03-08 12:52 ` [PATCH v1 11/25] arm64: dts: colibri-imx8x: Sort fec1 node alphabetically Philippe Schenker
2023-03-08 12:52 ` [PATCH v1 12/25] arm64: dts: colibri-imx8x: Add SPI Philippe Schenker
2023-03-08 12:52 ` [PATCH v1 13/25] arm64: dts: colibri-imx8x: Add gpio-line-names Philippe Schenker
2023-03-08 12:52 ` [PATCH v1 14/25] arm64: dts: colibri-imx8x: Disable touchscreen by default Philippe Schenker
2023-03-08 12:52 ` [PATCH v1 15/25] arm64: dts: colibri-imx8x: Add jpegenc/dec Philippe Schenker
2023-03-08 12:52 ` [PATCH v1 16/25] arm64: dts: colibri-imx8x: Add colibri pwm b, c, d Philippe Schenker
2023-03-08 12:52 ` [PATCH v1 17/25] arm64: dts: colibri-imx8x: eval: Add spi-to-can Philippe Schenker
2023-03-08 13:00 ` Krzysztof Kozlowski
2023-03-08 13:43 ` Philippe Schenker
2023-03-08 14:34 ` Krzysztof Kozlowski
2023-03-08 14:46 ` Philippe Schenker
2023-03-08 14:12 ` Philippe Schenker
2023-03-08 12:52 ` [PATCH v1 18/25] arm64: dts: colibri-imx8x: Add no-1-8-v to sd-card Philippe Schenker
2023-03-08 12:52 ` [PATCH v1 19/25] arm64: dts: colibri-imx8x: Set thermal thresholds Philippe Schenker
2023-03-08 12:52 ` [PATCH v1 20/25] arm64: dts: colibri-imx8x: Move gpio-keys to som level Philippe Schenker
2023-03-08 12:52 ` [PATCH v1 21/25] arm64: dts: colibri-imx8x: Add todo comments Philippe Schenker
2023-03-08 12:52 ` [PATCH v1 22/25] dt-bindings: arm: fsl: Add colibri-imx8x carrier boards Philippe Schenker
2023-03-08 13:04 ` Krzysztof Kozlowski
2023-03-08 12:52 ` [PATCH v1 23/25] arm64: dts: colibri-imx8x: Add aster carrier board Philippe Schenker
2023-03-08 12:52 ` [PATCH v1 24/25] arm64: dts: colibri-imx8x: Add iris " Philippe Schenker
2023-03-08 12:52 ` [PATCH v1 25/25] arm64: dts: colibri-imx8x: Add iris v2 " Philippe Schenker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230308125300.58244-8-dev@pschenker.ch \
--to=dev@pschenker.ch \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=frowand.list@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=philippe.schenker@toradex.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).