From: Linus Walleij <linus.walleij@linaro.org>
To: linux-gpio@vger.kernel.org, "Bartosz Golaszewski" <brgl@bgdev.pl>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Thorsten Scherer" <t.scherer@eckelmann.de>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
"Alexandre Torgue" <alexandre.torgue@foss.st.com>,
"Robert Richter" <rric@kernel.org>,
"Nobuhiro Iwamatsu" <nobuhiro1.iwamatsu@toshiba.co.jp>,
"Ray Jui" <rjui@broadcom.com>,
"Scott Branden" <sbranden@broadcom.com>,
"Broadcom internal kernel review list"
<bcm-kernel-feedback-list@broadcom.com>,
"Shubhrajyoti Datta" <shubhrajyoti.datta@xilinx.com>,
"Srinivas Neeli" <srinivas.neeli@xilinx.com>,
"Michal Simek" <michal.simek@xilinx.com>
Cc: linux-arm-kernel@lists.infradead.org,
linux-unisoc@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
Linus Walleij <linus.walleij@linaro.org>,
Marc Zyngier <maz@kernel.org>
Subject: [PATCH 8/9] gpio: xilinx: Convert to immutable irq_chip
Date: Mon, 20 Mar 2023 10:55:15 +0100 [thread overview]
Message-ID: <20230316-immutable-chips-2-v1-8-053d6ede831b@linaro.org> (raw)
In-Reply-To: <20230316-immutable-chips-2-v1-0-053d6ede831b@linaro.org>
Convert the driver to immutable irq-chip with a bit of
intuition.
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/gpio/gpio-xilinx.c | 23 +++++++++++++++--------
1 file changed, 15 insertions(+), 8 deletions(-)
diff --git a/drivers/gpio/gpio-xilinx.c b/drivers/gpio/gpio-xilinx.c
index e248809965ca..1fa66f2a667f 100644
--- a/drivers/gpio/gpio-xilinx.c
+++ b/drivers/gpio/gpio-xilinx.c
@@ -68,7 +68,6 @@ struct xgpio_instance {
DECLARE_BITMAP(dir, 64);
spinlock_t gpio_lock; /* For serializing operations */
int irq;
- struct irq_chip irqchip;
DECLARE_BITMAP(enable, 64);
DECLARE_BITMAP(rising_edge, 64);
DECLARE_BITMAP(falling_edge, 64);
@@ -416,6 +415,8 @@ static void xgpio_irq_mask(struct irq_data *irq_data)
xgpio_writereg(chip->regs + XGPIO_IPIER_OFFSET, temp);
}
spin_unlock_irqrestore(&chip->gpio_lock, flags);
+
+ gpiochip_disable_irq(&chip->gc, irq_offset);
}
/**
@@ -431,6 +432,8 @@ static void xgpio_irq_unmask(struct irq_data *irq_data)
u32 old_enable = xgpio_get_value32(chip->enable, bit);
u32 mask = BIT(bit / 32), val;
+ gpiochip_enable_irq(&chip->gc, irq_offset);
+
spin_lock_irqsave(&chip->gpio_lock, flags);
__set_bit(bit, chip->enable);
@@ -544,6 +547,16 @@ static void xgpio_irqhandler(struct irq_desc *desc)
chained_irq_exit(irqchip, desc);
}
+static const struct irq_chip xgpio_irq_chip = {
+ .name = "gpio-xilinx",
+ .irq_ack = xgpio_irq_ack,
+ .irq_mask = xgpio_irq_mask,
+ .irq_unmask = xgpio_irq_unmask,
+ .irq_set_type = xgpio_set_irq_type,
+ .flags = IRQCHIP_IMMUTABLE,
+ GPIOCHIP_IRQ_RESOURCE_HELPERS,
+};
+
/**
* xgpio_probe - Probe method for the GPIO device.
* @pdev: pointer to the platform device
@@ -653,12 +666,6 @@ static int xgpio_probe(struct platform_device *pdev)
if (chip->irq <= 0)
goto skip_irq;
- chip->irqchip.name = "gpio-xilinx";
- chip->irqchip.irq_ack = xgpio_irq_ack;
- chip->irqchip.irq_mask = xgpio_irq_mask;
- chip->irqchip.irq_unmask = xgpio_irq_unmask;
- chip->irqchip.irq_set_type = xgpio_set_irq_type;
-
/* Disable per-channel interrupts */
xgpio_writereg(chip->regs + XGPIO_IPIER_OFFSET, 0);
/* Clear any existing per-channel interrupts */
@@ -668,7 +675,7 @@ static int xgpio_probe(struct platform_device *pdev)
xgpio_writereg(chip->regs + XGPIO_GIER_OFFSET, XGPIO_GIER_IE);
girq = &chip->gc.irq;
- girq->chip = &chip->irqchip;
+ gpio_irq_chip_set_chip(girq, &xgpio_irq_chip);
girq->parent_handler = xgpio_irqhandler;
girq->num_parents = 1;
girq->parents = devm_kcalloc(&pdev->dev, 1,
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-03-20 11:01 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-20 9:55 [PATCH 0/9] Mass convert GPIO IRQ chips to be immutable part 2 Linus Walleij
2023-03-20 9:55 ` [PATCH 1/9] gpio: rda: Convert to immutable irq_chip Linus Walleij
2023-03-20 10:34 ` Manivannan Sadhasivam
2023-03-20 9:55 ` [PATCH 2/9] gpio: siox: " Linus Walleij
2023-03-20 9:55 ` [PATCH 3/9] gpio: stmpe: " Linus Walleij
2023-03-20 9:55 ` [PATCH 4/9] gpio: thunderx: " Linus Walleij
2023-03-20 9:55 ` [PATCH 5/9] gpio: tqmx86: " Linus Walleij
2023-03-20 9:55 ` [PATCH 6/9] gpio: visconti: " Linus Walleij
2023-03-20 9:55 ` [PATCH 7/9] gpio: xgs-iproc: " Linus Walleij
2023-03-20 9:55 ` Linus Walleij [this message]
2023-03-20 9:55 ` [PATCH 9/9] gpio: xlp: " Linus Walleij
2023-03-20 11:10 ` [PATCH 0/9] Mass convert GPIO IRQ chips to be immutable part 2 Marc Zyngier
2023-03-22 16:52 ` Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230316-immutable-chips-2-v1-8-053d6ede831b@linaro.org \
--to=linus.walleij@linaro.org \
--cc=alexandre.torgue@foss.st.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=brgl@bgdev.pl \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux-unisoc@lists.infradead.org \
--cc=mani@kernel.org \
--cc=maz@kernel.org \
--cc=mcoquelin.stm32@gmail.com \
--cc=michal.simek@xilinx.com \
--cc=nobuhiro1.iwamatsu@toshiba.co.jp \
--cc=rjui@broadcom.com \
--cc=rric@kernel.org \
--cc=sbranden@broadcom.com \
--cc=shubhrajyoti.datta@xilinx.com \
--cc=srinivas.neeli@xilinx.com \
--cc=t.scherer@eckelmann.de \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).