Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Serge Semin <fancer.lancer@gmail.com>
To: Elad Nachman <enachman@marvell.com>
Cc: thomas.petazzoni@bootlin.com, bhelgaas@google.com,
	lpieralisi@kernel.org, robh@kernel.org, kw@linux.com,
	krzysztof.kozlowski+dt@linaro.org, linux-pci@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, Yuval Shaia <yshaia@marvell.com>
Subject: Re: [PATCH v4 3/8] PCI: armada8k: Add AC5 MSI support
Date: Thu, 23 Mar 2023 02:23:13 +0300	[thread overview]
Message-ID: <20230322232313.zbxhodgfqeoyclbg@mobilestation> (raw)
In-Reply-To: <20230313124016.17102-4-enachman@marvell.com>

On Mon, Mar 13, 2023 at 02:40:11PM +0200, Elad Nachman wrote:
> From: Yuval Shaia <yshaia@marvell.com>
> 
> AC5 requires different handling for MSI as with armada8k.
> Fix it by:
> 
> 1. Enabling the relevant bits in init phase
> 2. Dispatch virtual IRQ handlers when MSI interrupts are received
> 
> Also enable/disable PCIE_APP_LTSSM for AC5.
> 
> Signed-off-by: Yuval Shaia <yshaia@marvell.com>
> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
> ---
> v4:
>    Fix commit subject to be aligned with previous patch in series
> 
> v2:
>    1) fix W1 warnings which caused by unused leftover code
> 
>    2) fix type in "requieres" word in the description
> 
>  drivers/pci/controller/dwc/pcie-armada8k.c | 22 +++++++++++++++++++++-
>  1 file changed, 21 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-armada8k.c b/drivers/pci/controller/dwc/pcie-armada8k.c
> index b9fb1375dc58..02481ecadd25 100644
> --- a/drivers/pci/controller/dwc/pcie-armada8k.c
> +++ b/drivers/pci/controller/dwc/pcie-armada8k.c
> @@ -50,6 +50,7 @@ struct armada8k_pcie_of_data {
>  
>  #define PCIE_GLOBAL_CONTROL_REG		(PCIE_VENDOR_REGS_OFFSET + 0x0)
>  #define PCIE_APP_LTSSM_EN		BIT(2)
> +#define PCIE_APP_LTSSM_EN_AC5		BIT(24)
>  #define PCIE_DEVICE_TYPE_SHIFT		4
>  #define PCIE_DEVICE_TYPE_MASK		0xF
>  #define PCIE_DEVICE_TYPE_RC		0x4 /* Root complex */
> @@ -69,6 +70,7 @@ struct armada8k_pcie_of_data {
>  #define PCIE_INT_B_ASSERT_MASK_AC5	BIT(13)
>  #define PCIE_INT_C_ASSERT_MASK_AC5	BIT(14)
>  #define PCIE_INT_D_ASSERT_MASK_AC5	BIT(15)
> +#define PCIE_MSI_MASK_AC5		BIT(11)
>  
>  #define PCIE_ATU_ACCESS_MASK_AC5	GENMASK(21, 20)
>  
> @@ -184,6 +186,16 @@ static int armada8k_pcie_start_link(struct dw_pcie *pci)
>  	return 0;
>  }
>  
> +static void ac5_pcie_msi_init(struct dw_pcie *pci)
> +{
> +	u32 val;
> +
> +	/* Set MSI bit in interrupt mask */
> +	val = dw_pcie_readl_dbi(pci, PCIE_GLOBAL_INT_MASK1_REG);
> +	val |= PCIE_MSI_MASK_AC5;
> +	dw_pcie_writel_dbi(pci, PCIE_GLOBAL_INT_MASK1_REG, val);
> +}
> +
>  static int armada8k_pcie_host_init(struct dw_pcie_rp *pp)
>  {
>  	u32 reg;
> @@ -193,7 +205,10 @@ static int armada8k_pcie_host_init(struct dw_pcie_rp *pp)
>  	if (!dw_pcie_link_up(pci)) {
>  		/* Disable LTSSM state machine to enable configuration */
>  		reg = dw_pcie_readl_dbi(pci, PCIE_GLOBAL_CONTROL_REG);

> -		reg &= ~(PCIE_APP_LTSSM_EN);
> +		if (pcie->pcie_type == ARMADA8K_PCIE_TYPE_AC5)
> +			reg &= ~(PCIE_APP_LTSSM_EN_AC5);
> +		else
> +			reg &= ~(PCIE_APP_LTSSM_EN);

This has nothing to do with MSIs.

-Serge(y)

>  		dw_pcie_writel_dbi(pci, PCIE_GLOBAL_CONTROL_REG, reg);
>  	}
>  
> @@ -233,6 +248,9 @@ static int armada8k_pcie_host_init(struct dw_pcie_rp *pp)
>  		dw_pcie_writel_dbi(pci, PCIE_GLOBAL_INT_MASK1_REG, reg);
>  	}
>  
> +	if (IS_ENABLED(CONFIG_PCI_MSI) && (pcie->pcie_type == ARMADA8K_PCIE_TYPE_AC5))
> +		ac5_pcie_msi_init(pci);
> +
>  	return 0;
>  }
>  
> @@ -249,6 +267,8 @@ static irqreturn_t armada8k_pcie_irq_handler(int irq, void *arg)
>  	 */
>  	val = dw_pcie_readl_dbi(pci, PCIE_GLOBAL_INT_CAUSE1_REG);
>  	dw_pcie_writel_dbi(pci, PCIE_GLOBAL_INT_CAUSE1_REG, val);
> +	if ((PCIE_MSI_MASK_AC5 & val) && (pcie->pcie_type == ARMADA8K_PCIE_TYPE_AC5))
> +		dw_handle_msi_irq(&pci->pp);
>  
>  	return IRQ_HANDLED;
>  }
> -- 
> 2.17.1
> 
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

      parent reply	other threads:[~2023-03-22 23:24 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20230313124016.17102-1-enachman@marvell.com>
2023-03-13 19:22 ` [PATCH v4 0/8] PCI: dwc: Add support for Marvell AC5 SoC Bjorn Helgaas
     [not found] ` <20230313124016.17102-9-enachman@marvell.com>
2023-03-13 19:48   ` [PATCH v4 8/8] PCI: dwc: Introduce region limit from DT Bjorn Helgaas
2023-03-14 20:48     ` Serge Semin
2023-03-23  0:11   ` Serge Semin
     [not found] ` <20230313124016.17102-8-enachman@marvell.com>
2023-03-17 18:23   ` [PATCH v4 7/8] PCI: dwc: Introduce configurable DMA mask Rob Herring
2023-03-27 17:01     ` Robin Murphy
     [not found] ` <20230313124016.17102-5-enachman@marvell.com>
2023-03-17 18:30   ` [PATCH v4 4/8] dt-bindings: PCI: dwc: Add dma-ranges, region mask Rob Herring
     [not found] ` <20230313124016.17102-3-enachman@marvell.com>
2023-03-13 19:43   ` [PATCH v4 2/8] PCI: armada8k: Add AC5 SoC support Bjorn Helgaas
2023-03-22 23:19   ` Serge Semin
     [not found] ` <20230313124016.17102-4-enachman@marvell.com>
2023-03-22 23:23   ` Serge Semin [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230322232313.zbxhodgfqeoyclbg@mobilestation \
    --to=fancer.lancer@gmail.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=enachman@marvell.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kw@linux.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    --cc=robh@kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=yshaia@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox