From: Florent Revest <revest@chromium.org>
To: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-trace-kernel@vger.kernel.org,
bpf@vger.kernel.org
Cc: catalin.marinas@arm.com, will@kernel.org, rostedt@goodmis.org,
mhiramat@kernel.org, mark.rutland@arm.com, ast@kernel.org,
daniel@iogearbox.net, andrii@kernel.org, kpsingh@kernel.org,
jolsa@kernel.org, xukuohai@huaweicloud.com, lihuafei1@huawei.com,
Florent Revest <revest@chromium.org>
Subject: [PATCH v6 4/5] arm64: ftrace: Add direct call trampoline samples support
Date: Wed, 5 Apr 2023 20:02:49 +0200 [thread overview]
Message-ID: <20230405180250.2046566-5-revest@chromium.org> (raw)
In-Reply-To: <20230405180250.2046566-1-revest@chromium.org>
The ftrace samples need per-architecture trampoline implementations
to save and restore argument registers around the calls to
my_direct_func* and to restore polluted registers (eg: x30).
These samples also include <asm/asm-offsets.h> which, on arm64, is not
necessary and redefines previously defined macros (resulting in
warnings) so these includes are guarded by !CONFIG_ARM64.
Signed-off-by: Florent Revest <revest@chromium.org>
---
arch/arm64/Kconfig | 2 ++
samples/ftrace/ftrace-direct-modify.c | 34 ++++++++++++++++++
samples/ftrace/ftrace-direct-multi-modify.c | 40 +++++++++++++++++++++
samples/ftrace/ftrace-direct-multi.c | 24 +++++++++++++
samples/ftrace/ftrace-direct-too.c | 26 ++++++++++++++
samples/ftrace/ftrace-direct.c | 24 +++++++++++++
6 files changed, 150 insertions(+)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index f3503d0cc1b8..c2bf28099abd 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -194,6 +194,8 @@ config ARM64
!CC_OPTIMIZE_FOR_SIZE)
select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY \
if DYNAMIC_FTRACE_WITH_ARGS
+ select HAVE_SAMPLE_FTRACE_DIRECT
+ select HAVE_SAMPLE_FTRACE_DIRECT_MULTI
select HAVE_EFFICIENT_UNALIGNED_ACCESS
select HAVE_FAST_GUP
select HAVE_FTRACE_MCOUNT_RECORD
diff --git a/samples/ftrace/ftrace-direct-modify.c b/samples/ftrace/ftrace-direct-modify.c
index 25fba66f61c0..98d1b7385f08 100644
--- a/samples/ftrace/ftrace-direct-modify.c
+++ b/samples/ftrace/ftrace-direct-modify.c
@@ -2,7 +2,9 @@
#include <linux/module.h>
#include <linux/kthread.h>
#include <linux/ftrace.h>
+#ifndef CONFIG_ARM64
#include <asm/asm-offsets.h>
+#endif
extern void my_direct_func1(void);
extern void my_direct_func2(void);
@@ -96,6 +98,38 @@ asm (
#endif /* CONFIG_S390 */
+#ifdef CONFIG_ARM64
+
+asm (
+" .pushsection .text, \"ax\", @progbits\n"
+" .type my_tramp1, @function\n"
+" .globl my_tramp1\n"
+" my_tramp1:"
+" bti c\n"
+" sub sp, sp, #16\n"
+" stp x9, x30, [sp]\n"
+" bl my_direct_func1\n"
+" ldp x30, x9, [sp]\n"
+" add sp, sp, #16\n"
+" ret x9\n"
+" .size my_tramp1, .-my_tramp1\n"
+
+" .type my_tramp2, @function\n"
+" .globl my_tramp2\n"
+" my_tramp2:"
+" bti c\n"
+" sub sp, sp, #16\n"
+" stp x9, x30, [sp]\n"
+" bl my_direct_func2\n"
+" ldp x30, x9, [sp]\n"
+" add sp, sp, #16\n"
+" ret x9\n"
+" .size my_tramp2, .-my_tramp2\n"
+" .popsection\n"
+);
+
+#endif /* CONFIG_ARM64 */
+
static struct ftrace_ops direct;
static unsigned long my_tramp = (unsigned long)my_tramp1;
diff --git a/samples/ftrace/ftrace-direct-multi-modify.c b/samples/ftrace/ftrace-direct-multi-modify.c
index f72623899602..26956c8fc513 100644
--- a/samples/ftrace/ftrace-direct-multi-modify.c
+++ b/samples/ftrace/ftrace-direct-multi-modify.c
@@ -2,7 +2,9 @@
#include <linux/module.h>
#include <linux/kthread.h>
#include <linux/ftrace.h>
+#ifndef CONFIG_ARM64
#include <asm/asm-offsets.h>
+#endif
extern void my_direct_func1(unsigned long ip);
extern void my_direct_func2(unsigned long ip);
@@ -103,6 +105,44 @@ asm (
#endif /* CONFIG_S390 */
+#ifdef CONFIG_ARM64
+
+asm (
+" .pushsection .text, \"ax\", @progbits\n"
+" .type my_tramp1, @function\n"
+" .globl my_tramp1\n"
+" my_tramp1:"
+" bti c\n"
+" sub sp, sp, #32\n"
+" stp x9, x30, [sp]\n"
+" str x0, [sp, #16]\n"
+" mov x0, x30\n"
+" bl my_direct_func1\n"
+" ldp x30, x9, [sp]\n"
+" ldr x0, [sp, #16]\n"
+" add sp, sp, #32\n"
+" ret x9\n"
+" .size my_tramp1, .-my_tramp1\n"
+
+" .type my_tramp2, @function\n"
+" .globl my_tramp2\n"
+" my_tramp2:"
+" bti c\n"
+" sub sp, sp, #32\n"
+" stp x9, x30, [sp]\n"
+" str x0, [sp, #16]\n"
+" mov x0, x30\n"
+" bl my_direct_func2\n"
+" ldp x30, x9, [sp]\n"
+" ldr x0, [sp, #16]\n"
+" add sp, sp, #32\n"
+" ret x9\n"
+" .size my_tramp2, .-my_tramp2\n"
+" .popsection\n"
+);
+
+#endif /* CONFIG_ARM64 */
+
static unsigned long my_tramp = (unsigned long)my_tramp1;
static unsigned long tramps[2] = {
(unsigned long)my_tramp1,
diff --git a/samples/ftrace/ftrace-direct-multi.c b/samples/ftrace/ftrace-direct-multi.c
index 1547c2c6be02..b2ac90e0c02e 100644
--- a/samples/ftrace/ftrace-direct-multi.c
+++ b/samples/ftrace/ftrace-direct-multi.c
@@ -4,7 +4,9 @@
#include <linux/mm.h> /* for handle_mm_fault() */
#include <linux/ftrace.h>
#include <linux/sched/stat.h>
+#ifndef CONFIG_ARM64
#include <asm/asm-offsets.h>
+#endif
extern void my_direct_func(unsigned long ip);
@@ -66,6 +68,28 @@ asm (
#endif /* CONFIG_S390 */
+#ifdef CONFIG_ARM64
+
+asm (
+" .pushsection .text, \"ax\", @progbits\n"
+" .type my_tramp, @function\n"
+" .globl my_tramp\n"
+" my_tramp:"
+" bti c\n"
+" sub sp, sp, #32\n"
+" stp x9, x30, [sp]\n"
+" str x0, [sp, #16]\n"
+" mov x0, x30\n"
+" bl my_direct_func\n"
+" ldp x30, x9, [sp]\n"
+" ldr x0, [sp, #16]\n"
+" add sp, sp, #32\n"
+" ret x9\n"
+" .size my_tramp, .-my_tramp\n"
+" .popsection\n"
+);
+
+#endif /* CONFIG_ARM64 */
static struct ftrace_ops direct;
static int __init ftrace_direct_multi_init(void)
diff --git a/samples/ftrace/ftrace-direct-too.c b/samples/ftrace/ftrace-direct-too.c
index 71ed4ee8cb4a..38f6f677f913 100644
--- a/samples/ftrace/ftrace-direct-too.c
+++ b/samples/ftrace/ftrace-direct-too.c
@@ -3,7 +3,9 @@
#include <linux/mm.h> /* for handle_mm_fault() */
#include <linux/ftrace.h>
+#ifndef CONFIG_ARM64
#include <asm/asm-offsets.h>
+#endif
extern void my_direct_func(struct vm_area_struct *vma, unsigned long address,
unsigned int flags, struct pt_regs *regs);
@@ -72,6 +74,30 @@ asm (
#endif /* CONFIG_S390 */
+#ifdef CONFIG_ARM64
+
+asm (
+" .pushsection .text, \"ax\", @progbits\n"
+" .type my_tramp, @function\n"
+" .globl my_tramp\n"
+" my_tramp:"
+" bti c\n"
+" sub sp, sp, #48\n"
+" stp x9, x30, [sp]\n"
+" stp x0, x1, [sp, #16]\n"
+" stp x2, x3, [sp, #32]\n"
+" bl my_direct_func\n"
+" ldp x30, x9, [sp]\n"
+" ldp x0, x1, [sp, #16]\n"
+" ldp x2, x3, [sp, #32]\n"
+" add sp, sp, #48\n"
+" ret x9\n"
+" .size my_tramp, .-my_tramp\n"
+" .popsection\n"
+);
+
+#endif /* CONFIG_ARM64 */
+
static struct ftrace_ops direct;
static int __init ftrace_direct_init(void)
diff --git a/samples/ftrace/ftrace-direct.c b/samples/ftrace/ftrace-direct.c
index d81a9473b585..e5312f9c15d3 100644
--- a/samples/ftrace/ftrace-direct.c
+++ b/samples/ftrace/ftrace-direct.c
@@ -3,7 +3,9 @@
#include <linux/sched.h> /* for wake_up_process() */
#include <linux/ftrace.h>
+#ifndef CONFIG_ARM64
#include <asm/asm-offsets.h>
+#endif
extern void my_direct_func(struct task_struct *p);
@@ -63,6 +65,28 @@ asm (
#endif /* CONFIG_S390 */
+#ifdef CONFIG_ARM64
+
+asm (
+" .pushsection .text, \"ax\", @progbits\n"
+" .type my_tramp, @function\n"
+" .globl my_tramp\n"
+" my_tramp:"
+" bti c\n"
+" sub sp, sp, #32\n"
+" stp x9, x30, [sp]\n"
+" str x0, [sp, #16]\n"
+" bl my_direct_func\n"
+" ldp x30, x9, [sp]\n"
+" ldr x0, [sp, #16]\n"
+" add sp, sp, #32\n"
+" ret x9\n"
+" .size my_tramp, .-my_tramp\n"
+" .popsection\n"
+);
+
+#endif /* CONFIG_ARM64 */
+
static struct ftrace_ops direct;
static int __init ftrace_direct_init(void)
--
2.40.0.577.gac1e443424-goog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-04-05 18:04 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-05 18:02 [PATCH v6 0/5] Add ftrace direct call for arm64 Florent Revest
2023-04-05 18:02 ` [PATCH v6 1/5] arm64: ftrace: Add direct call support Florent Revest
2023-04-05 18:02 ` [PATCH v6 2/5] arm64: ftrace: Simplify get_ftrace_plt Florent Revest
2023-04-05 18:02 ` [PATCH v6 3/5] samples: ftrace: Save required argument registers in sample trampolines Florent Revest
2023-04-05 20:40 ` Steven Rostedt
2023-04-06 10:22 ` Mark Rutland
2023-04-05 18:02 ` Florent Revest [this message]
2023-04-06 10:50 ` [PATCH v6 4/5] arm64: ftrace: Add direct call trampoline samples support Mark Rutland
2023-04-05 18:02 ` [PATCH v6 5/5] selftests/bpf: Update the tests deny list on aarch64 Florent Revest
2023-04-11 15:56 ` [PATCH v6 0/5] Add ftrace direct call for arm64 Mark Rutland
2023-04-11 16:47 ` Steven Rostedt
2023-04-11 17:08 ` Will Deacon
2023-04-11 17:44 ` Steven Rostedt
2023-04-11 17:54 ` Will Deacon
2023-04-12 9:50 ` Mark Rutland
2023-04-24 20:09 ` Steven Rostedt
2023-04-11 18:37 ` Will Deacon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230405180250.2046566-5-revest@chromium.org \
--to=revest@chromium.org \
--cc=andrii@kernel.org \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=catalin.marinas@arm.com \
--cc=daniel@iogearbox.net \
--cc=jolsa@kernel.org \
--cc=kpsingh@kernel.org \
--cc=lihuafei1@huawei.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-trace-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mhiramat@kernel.org \
--cc=rostedt@goodmis.org \
--cc=will@kernel.org \
--cc=xukuohai@huaweicloud.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox