* [PATCH 01/12] dt-bindings: soc: samsung: add Exynos4212 PMU compatible
2023-04-16 10:16 [PATCH 00/12] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards Artur Weber
@ 2023-04-16 10:16 ` Artur Weber
2023-04-16 10:16 ` [PATCH 02/12] dt-bindings: clock: add Exynos4212 clock compatible Artur Weber
` (11 subsequent siblings)
12 siblings, 0 replies; 19+ messages in thread
From: Artur Weber @ 2023-04-16 10:16 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Alim Akhtar, Rob Herring, Sylwester Nawrocki, Tomasz Figa,
Chanwoo Choi, Michael Turquette, Stephen Boyd, Arnd Bergmann,
Olof Johansson, soc, Russell King, Daniel Lezcano, Kukjin Kim,
Mauro Carvalho Chehab, Vinod Koul, Kishon Vijay Abraham I,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel,
linux-clk, linux-pm, linux-media, linux-phy,
~postmarketos/upstreaming, Artur Weber
Re-introduced as part of the Exynos4212 re-introduction effort.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml
index f7c141dd11ec..be3128f2c0df 100644
--- a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml
+++ b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml
@@ -17,6 +17,7 @@ select:
enum:
- samsung,exynos3250-pmu
- samsung,exynos4210-pmu
+ - samsung,exynos4212-pmu
- samsung,exynos4412-pmu
- samsung,exynos5250-pmu
- samsung,exynos5260-pmu
@@ -36,6 +37,7 @@ properties:
- enum:
- samsung,exynos3250-pmu
- samsung,exynos4210-pmu
+ - samsung,exynos4212-pmu
- samsung,exynos4412-pmu
- samsung,exynos5250-pmu
- samsung,exynos5260-pmu
@@ -122,6 +124,7 @@ allOf:
enum:
- samsung,exynos3250-pmu
- samsung,exynos4210-pmu
+ - samsung,exynos4212-pmu
- samsung,exynos4412-pmu
- samsung,exynos5250-pmu
- samsung,exynos5410-pmu
--
2.40.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 02/12] dt-bindings: clock: add Exynos4212 clock compatible
2023-04-16 10:16 [PATCH 00/12] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards Artur Weber
2023-04-16 10:16 ` [PATCH 01/12] dt-bindings: soc: samsung: add Exynos4212 PMU compatible Artur Weber
@ 2023-04-16 10:16 ` Artur Weber
2023-04-16 10:16 ` [PATCH 03/12] ARM: exynos: Re-introduce Exynos4212 support Artur Weber
` (10 subsequent siblings)
12 siblings, 0 replies; 19+ messages in thread
From: Artur Weber @ 2023-04-16 10:16 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Alim Akhtar, Rob Herring, Sylwester Nawrocki, Tomasz Figa,
Chanwoo Choi, Michael Turquette, Stephen Boyd, Arnd Bergmann,
Olof Johansson, soc, Russell King, Daniel Lezcano, Kukjin Kim,
Mauro Carvalho Chehab, Vinod Koul, Kishon Vijay Abraham I,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel,
linux-clk, linux-pm, linux-media, linux-phy,
~postmarketos/upstreaming, Artur Weber
Re-introduced as part of the Exynos4212 re-introduction effort.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
.../devicetree/bindings/clock/samsung,exynos-clock.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml
index 0589a63e273a..a36781a455b6 100644
--- a/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml
@@ -24,6 +24,7 @@ properties:
- samsung,exynos3250-cmu-dmc
- samsung,exynos3250-cmu-isp
- samsung,exynos4210-clock
+ - samsung,exynos4212-clock
- samsung,exynos4412-clock
- samsung,exynos5250-clock
- items:
--
2.40.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 03/12] ARM: exynos: Re-introduce Exynos4212 support
2023-04-16 10:16 [PATCH 00/12] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards Artur Weber
2023-04-16 10:16 ` [PATCH 01/12] dt-bindings: soc: samsung: add Exynos4212 PMU compatible Artur Weber
2023-04-16 10:16 ` [PATCH 02/12] dt-bindings: clock: add Exynos4212 clock compatible Artur Weber
@ 2023-04-16 10:16 ` Artur Weber
2023-04-16 10:16 ` [PATCH 04/12] soc: samsung: " Artur Weber
` (9 subsequent siblings)
12 siblings, 0 replies; 19+ messages in thread
From: Artur Weber @ 2023-04-16 10:16 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Alim Akhtar, Rob Herring, Sylwester Nawrocki, Tomasz Figa,
Chanwoo Choi, Michael Turquette, Stephen Boyd, Arnd Bergmann,
Olof Johansson, soc, Russell King, Daniel Lezcano, Kukjin Kim,
Mauro Carvalho Chehab, Vinod Koul, Kishon Vijay Abraham I,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel,
linux-clk, linux-pm, linux-media, linux-phy,
~postmarketos/upstreaming, Artur Weber
The platform was originally dropped in commit bca9085e0ae9 ("ARM:
dts: exynos: remove Exynos4212 support (dead code)"), as there were
no boards using it.
We will be adding a device that uses it, so add it back.
This effectively reverts commit 9e43eca3c874 ("ARM: EXYNOS: Remove
Exynos4212 related dead code").
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
arch/arm/mach-exynos/Kconfig | 5 +++++
arch/arm/mach-exynos/common.h | 8 ++++++++
arch/arm/mach-exynos/exynos.c | 2 ++
arch/arm/mach-exynos/firmware.c | 8 +++++++-
arch/arm/mach-exynos/pm.c | 2 +-
arch/arm/mach-exynos/suspend.c | 4 ++++
6 files changed, 27 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 4d3b40e4049a..b3d5df5225fe 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -78,6 +78,11 @@ config CPU_EXYNOS4210
default y
depends on ARCH_EXYNOS4
+config SOC_EXYNOS4212
+ bool "Samsung Exynos4212"
+ default y
+ depends on ARCH_EXYNOS4
+
config SOC_EXYNOS4412
bool "Samsung Exynos4412"
default y
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 29eb075b24a4..c9e85d33c309 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -15,6 +15,7 @@
#define EXYNOS3_SOC_MASK 0xFFFFF000
#define EXYNOS4210_CPU_ID 0x43210000
+#define EXYNOS4212_CPU_ID 0x43220000
#define EXYNOS4412_CPU_ID 0xE4412200
#define EXYNOS4_CPU_MASK 0xFFFE0000
@@ -34,6 +35,7 @@ static inline int is_samsung_##name(void) \
IS_SAMSUNG_CPU(exynos3250, EXYNOS3250_SOC_ID, EXYNOS3_SOC_MASK)
IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
IS_SAMSUNG_CPU(exynos5410, EXYNOS5410_SOC_ID, EXYNOS5_SOC_MASK)
@@ -52,6 +54,12 @@ IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK)
# define soc_is_exynos4210() 0
#endif
+#if defined(CONFIG_SOC_EXYNOS4212)
+# define soc_is_exynos4212() is_samsung_exynos4212()
+#else
+# define soc_is_exynos4212() 0
+#endif
+
#if defined(CONFIG_SOC_EXYNOS4412)
# define soc_is_exynos4412() is_samsung_exynos4412()
#else
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 51a247ca4da8..5671621f1661 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -178,6 +178,7 @@ static void __init exynos_dt_machine_init(void)
exynos_cpuidle.dev.platform_data = &cpuidle_coupled_exynos_data;
#endif
if (of_machine_is_compatible("samsung,exynos4210") ||
+ of_machine_is_compatible("samsung,exynos4212") ||
(of_machine_is_compatible("samsung,exynos4412") &&
(of_machine_is_compatible("samsung,trats2") ||
of_machine_is_compatible("samsung,midas") ||
@@ -192,6 +193,7 @@ static char const *const exynos_dt_compat[] __initconst = {
"samsung,exynos3250",
"samsung,exynos4",
"samsung,exynos4210",
+ "samsung,exynos4212",
"samsung,exynos4412",
"samsung,exynos5",
"samsung,exynos5250",
diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
index 2da5b60b59e2..110c8064ee64 100644
--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
@@ -63,12 +63,18 @@ static int exynos_cpu_boot(int cpu)
*
* On Exynos5 devices the call is ignored by trustzone firmware.
*/
- if (!soc_is_exynos4210() && !soc_is_exynos4412())
+ if (!soc_is_exynos4210() && !soc_is_exynos4412() &&
+ !soc_is_exynos4212())
return 0;
/*
* The second parameter of SMC_CMD_CPU1BOOT command means CPU id.
+ * But, Exynos4212 has only one secondary CPU so second parameter
+ * isn't used for informing secure firmware about CPU id.
*/
+ if (soc_is_exynos4212())
+ cpu = 0;
+
exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0);
return 0;
}
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 30f4e55bf39e..9b6db04e4e34 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -161,7 +161,7 @@ void exynos_enter_aftr(void)
exynos_pm_central_suspend();
- if (soc_is_exynos4412()) {
+ if (soc_is_exynos4412() || soc_is_exynos4212()) {
/* Setting SEQ_OPTION register */
pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0,
S5P_CENTRAL_SEQ_OPTION);
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index 3bf14ca78b62..df1e10033f90 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -231,6 +231,7 @@ static int __init exynos_pmu_irq_init(struct device_node *node,
EXYNOS_PMU_IRQ(exynos3250_pmu_irq, "samsung,exynos3250-pmu");
EXYNOS_PMU_IRQ(exynos4210_pmu_irq, "samsung,exynos4210-pmu");
+EXYNOS_PMU_IRQ(exynos4212_pmu_irq, "samsung,exynos4212-pmu");
EXYNOS_PMU_IRQ(exynos4412_pmu_irq, "samsung,exynos4412-pmu");
EXYNOS_PMU_IRQ(exynos5250_pmu_irq, "samsung,exynos5250-pmu");
EXYNOS_PMU_IRQ(exynos5420_pmu_irq, "samsung,exynos5420-pmu");
@@ -640,6 +641,9 @@ static const struct of_device_id exynos_pmu_of_device_ids[] __initconst = {
}, {
.compatible = "samsung,exynos4210-pmu",
.data = &exynos4_pm_data,
+ }, {
+ .compatible = "samsung,exynos4212-pmu",
+ .data = &exynos4_pm_data,
}, {
.compatible = "samsung,exynos4412-pmu",
.data = &exynos4_pm_data,
--
2.40.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 04/12] soc: samsung: Re-introduce Exynos4212 support
2023-04-16 10:16 [PATCH 00/12] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards Artur Weber
` (2 preceding siblings ...)
2023-04-16 10:16 ` [PATCH 03/12] ARM: exynos: Re-introduce Exynos4212 support Artur Weber
@ 2023-04-16 10:16 ` Artur Weber
2023-04-16 10:16 ` [PATCH 05/12] clk: samsung: Add Exynos4212 compatible to CLKOUT driver Artur Weber
` (8 subsequent siblings)
12 siblings, 0 replies; 19+ messages in thread
From: Artur Weber @ 2023-04-16 10:16 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Alim Akhtar, Rob Herring, Sylwester Nawrocki, Tomasz Figa,
Chanwoo Choi, Michael Turquette, Stephen Boyd, Arnd Bergmann,
Olof Johansson, soc, Russell King, Daniel Lezcano, Kukjin Kim,
Mauro Carvalho Chehab, Vinod Koul, Kishon Vijay Abraham I,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel,
linux-clk, linux-pm, linux-media, linux-phy,
~postmarketos/upstreaming, Artur Weber
The platform was originally dropped in commit bca9085e0ae9 ("ARM:
dts: exynos: remove Exynos4212 support (dead code)"), as there were
no boards using it.
We will be adding a device that uses it, so add it back.
This effectively reverts commit c40610198f35 ("soc: samsung: Remove
Exynos4212 related dead code").
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
drivers/soc/samsung/exynos-pmu.c | 9 +++++++++
drivers/soc/samsung/exynos-pmu.h | 2 ++
drivers/soc/samsung/exynos4-pmu.c | 13 +++++++++++--
3 files changed, 22 insertions(+), 2 deletions(-)
diff --git a/drivers/soc/samsung/exynos-pmu.c b/drivers/soc/samsung/exynos-pmu.c
index 732c86ce2be8..f3437db2fbdc 100644
--- a/drivers/soc/samsung/exynos-pmu.c
+++ b/drivers/soc/samsung/exynos-pmu.c
@@ -57,6 +57,12 @@ void exynos_sys_powerdown_conf(enum sys_powerdown mode)
if (pmu_data->powerdown_conf_extra)
pmu_data->powerdown_conf_extra(mode);
+
+ if (pmu_data->pmu_config_extra) {
+ for (i = 0; pmu_data->pmu_config_extra[i].offset != PMU_TABLE_END; i++)
+ pmu_raw_writel(pmu_data->pmu_config_extra[i].val[mode],
+ pmu_data->pmu_config_extra[i].offset);
+ }
}
/*
@@ -79,6 +85,9 @@ static const struct of_device_id exynos_pmu_of_device_ids[] = {
}, {
.compatible = "samsung,exynos4210-pmu",
.data = exynos_pmu_data_arm_ptr(exynos4210_pmu_data),
+ }, {
+ .compatible = "samsung,exynos4212-pmu",
+ .data = exynos_pmu_data_arm_ptr(exynos4212_pmu_data),
}, {
.compatible = "samsung,exynos4412-pmu",
.data = exynos_pmu_data_arm_ptr(exynos4412_pmu_data),
diff --git a/drivers/soc/samsung/exynos-pmu.h b/drivers/soc/samsung/exynos-pmu.h
index 5e851f32307e..1c652ffd79b4 100644
--- a/drivers/soc/samsung/exynos-pmu.h
+++ b/drivers/soc/samsung/exynos-pmu.h
@@ -20,6 +20,7 @@ struct exynos_pmu_conf {
struct exynos_pmu_data {
const struct exynos_pmu_conf *pmu_config;
+ const struct exynos_pmu_conf *pmu_config_extra;
void (*pmu_init)(void);
void (*powerdown_conf)(enum sys_powerdown);
@@ -32,6 +33,7 @@ extern void __iomem *pmu_base_addr;
/* list of all exported SoC specific data */
extern const struct exynos_pmu_data exynos3250_pmu_data;
extern const struct exynos_pmu_data exynos4210_pmu_data;
+extern const struct exynos_pmu_data exynos4212_pmu_data;
extern const struct exynos_pmu_data exynos4412_pmu_data;
extern const struct exynos_pmu_data exynos5250_pmu_data;
extern const struct exynos_pmu_data exynos5420_pmu_data;
diff --git a/drivers/soc/samsung/exynos4-pmu.c b/drivers/soc/samsung/exynos4-pmu.c
index cb35103565a6..f8092190b938 100644
--- a/drivers/soc/samsung/exynos4-pmu.c
+++ b/drivers/soc/samsung/exynos4-pmu.c
@@ -86,7 +86,7 @@ static const struct exynos_pmu_conf exynos4210_pmu_config[] = {
{ PMU_TABLE_END,},
};
-static const struct exynos_pmu_conf exynos4412_pmu_config[] = {
+static const struct exynos_pmu_conf exynos4x12_pmu_config[] = {
{ S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } },
{ S5P_DIS_IRQ_CORE0, { 0x0, 0x0, 0x0 } },
{ S5P_DIS_IRQ_CENTRAL0, { 0x0, 0x0, 0x0 } },
@@ -191,6 +191,10 @@ static const struct exynos_pmu_conf exynos4412_pmu_config[] = {
{ S5P_GPS_ALIVE_LOWPWR, { 0x7, 0x0, 0x0 } },
{ S5P_CMU_SYSCLK_ISP_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_CMU_SYSCLK_GPS_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { PMU_TABLE_END,},
+};
+
+static const struct exynos_pmu_conf exynos4412_pmu_config[] = {
{ S5P_ARM_CORE2_LOWPWR, { 0x0, 0x0, 0x2 } },
{ S5P_DIS_IRQ_CORE2, { 0x0, 0x0, 0x0 } },
{ S5P_DIS_IRQ_CENTRAL2, { 0x0, 0x0, 0x0 } },
@@ -204,6 +208,11 @@ const struct exynos_pmu_data exynos4210_pmu_data = {
.pmu_config = exynos4210_pmu_config,
};
+const struct exynos_pmu_data exynos4212_pmu_data = {
+ .pmu_config = exynos4x12_pmu_config,
+};
+
const struct exynos_pmu_data exynos4412_pmu_data = {
- .pmu_config = exynos4412_pmu_config,
+ .pmu_config = exynos4x12_pmu_config,
+ .pmu_config_extra = exynos4412_pmu_config,
};
--
2.40.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 05/12] clk: samsung: Add Exynos4212 compatible to CLKOUT driver
2023-04-16 10:16 [PATCH 00/12] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards Artur Weber
` (3 preceding siblings ...)
2023-04-16 10:16 ` [PATCH 04/12] soc: samsung: " Artur Weber
@ 2023-04-16 10:16 ` Artur Weber
2023-04-16 10:16 ` [PATCH 06/12] clk: samsung: Re-add support for Exynos4212 CPU clock Artur Weber
` (7 subsequent siblings)
12 siblings, 0 replies; 19+ messages in thread
From: Artur Weber @ 2023-04-16 10:16 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Alim Akhtar, Rob Herring, Sylwester Nawrocki, Tomasz Figa,
Chanwoo Choi, Michael Turquette, Stephen Boyd, Arnd Bergmann,
Olof Johansson, soc, Russell King, Daniel Lezcano, Kukjin Kim,
Mauro Carvalho Chehab, Vinod Koul, Kishon Vijay Abraham I,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel,
linux-clk, linux-pm, linux-media, linux-phy,
~postmarketos/upstreaming, Artur Weber
The platform was originally dropped in commit bca9085e0ae9 ("ARM:
dts: exynos: remove Exynos4212 support (dead code)"), as there were
no boards using it.
We will be adding a device that uses it, so add it back.
This is effectively a revert of commit d5cd103b06f9 ("clk: samsung:
Remove support for Exynos4212 SoCs in Exynos CLKOUT driver"); the
driver has changed significantly since then, prompting this re-make.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
drivers/clk/samsung/clk-exynos-clkout.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/clk/samsung/clk-exynos-clkout.c b/drivers/clk/samsung/clk-exynos-clkout.c
index e6d6cbf8c4e6..326d5fc58727 100644
--- a/drivers/clk/samsung/clk-exynos-clkout.c
+++ b/drivers/clk/samsung/clk-exynos-clkout.c
@@ -55,6 +55,9 @@ static const struct of_device_id exynos_clkout_ids[] = {
}, {
.compatible = "samsung,exynos4210-pmu",
.data = &exynos_clkout_exynos4,
+ }, {
+ .compatible = "samsung,exynos4212-pmu",
+ .data = &exynos_clkout_exynos4,
}, {
.compatible = "samsung,exynos4412-pmu",
.data = &exynos_clkout_exynos4,
--
2.40.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 06/12] clk: samsung: Re-add support for Exynos4212 CPU clock
2023-04-16 10:16 [PATCH 00/12] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards Artur Weber
` (4 preceding siblings ...)
2023-04-16 10:16 ` [PATCH 05/12] clk: samsung: Add Exynos4212 compatible to CLKOUT driver Artur Weber
@ 2023-04-16 10:16 ` Artur Weber
2023-04-16 10:16 ` [PATCH 07/12] Revert "media: exynos4-is: Remove dependency on obsolete SoC support" Artur Weber
` (6 subsequent siblings)
12 siblings, 0 replies; 19+ messages in thread
From: Artur Weber @ 2023-04-16 10:16 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Alim Akhtar, Rob Herring, Sylwester Nawrocki, Tomasz Figa,
Chanwoo Choi, Michael Turquette, Stephen Boyd, Arnd Bergmann,
Olof Johansson, soc, Russell King, Daniel Lezcano, Kukjin Kim,
Mauro Carvalho Chehab, Vinod Koul, Kishon Vijay Abraham I,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel,
linux-clk, linux-pm, linux-media, linux-phy,
~postmarketos/upstreaming, Artur Weber
The platform was originally dropped in commit bca9085e0ae9 ("ARM:
dts: exynos: remove Exynos4212 support (dead code)"), as there were
no boards using it.
We will be adding a device that uses it, so add it back.
This is effectively a revert of commit c9194fb623b0 ("clk: samsung:
Remove support for obsolete Exynos4212 CPU clock"); the driver
has changed significantly since then, prompting this re-make.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
drivers/clk/samsung/clk-exynos4.c | 44 +++++++++++++++++++++++++++----
1 file changed, 39 insertions(+), 5 deletions(-)
diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c
index 22009cb53428..9655f46db95c 100644
--- a/drivers/clk/samsung/clk-exynos4.c
+++ b/drivers/clk/samsung/clk-exynos4.c
@@ -138,7 +138,8 @@
/* the exynos4 soc type */
enum exynos4_soc {
EXYNOS4210,
- EXYNOS4X12,
+ EXYNOS4412,
+ EXYNOS4212,
};
/* list of PLLs to be registered */
@@ -1205,6 +1206,24 @@ static const struct exynos_cpuclk_cfg_data e4210_armclk_d[] __initconst = {
{ 0 },
};
+static const struct exynos_cpuclk_cfg_data e4212_armclk_d[] __initconst = {
+ { 1500000, E4210_CPU_DIV0(2, 1, 6, 0, 7, 3), E4210_CPU_DIV1(2, 6), },
+ { 1400000, E4210_CPU_DIV0(2, 1, 6, 0, 7, 3), E4210_CPU_DIV1(2, 6), },
+ { 1300000, E4210_CPU_DIV0(2, 1, 5, 0, 7, 3), E4210_CPU_DIV1(2, 5), },
+ { 1200000, E4210_CPU_DIV0(2, 1, 5, 0, 7, 3), E4210_CPU_DIV1(2, 5), },
+ { 1100000, E4210_CPU_DIV0(2, 1, 4, 0, 6, 3), E4210_CPU_DIV1(2, 4), },
+ { 1000000, E4210_CPU_DIV0(1, 1, 4, 0, 5, 2), E4210_CPU_DIV1(2, 4), },
+ { 900000, E4210_CPU_DIV0(1, 1, 3, 0, 5, 2), E4210_CPU_DIV1(2, 3), },
+ { 800000, E4210_CPU_DIV0(1, 1, 3, 0, 5, 2), E4210_CPU_DIV1(2, 3), },
+ { 700000, E4210_CPU_DIV0(1, 1, 3, 0, 4, 2), E4210_CPU_DIV1(2, 3), },
+ { 600000, E4210_CPU_DIV0(1, 1, 3, 0, 4, 2), E4210_CPU_DIV1(2, 3), },
+ { 500000, E4210_CPU_DIV0(1, 1, 3, 0, 4, 2), E4210_CPU_DIV1(2, 3), },
+ { 400000, E4210_CPU_DIV0(1, 1, 3, 0, 4, 2), E4210_CPU_DIV1(2, 3), },
+ { 300000, E4210_CPU_DIV0(1, 1, 2, 0, 4, 2), E4210_CPU_DIV1(2, 3), },
+ { 200000, E4210_CPU_DIV0(1, 1, 1, 0, 3, 1), E4210_CPU_DIV1(2, 3), },
+ { 0 },
+};
+
#define E4412_CPU_DIV1(cores, hpm, copy) \
(((cores) << 8) | ((hpm) << 4) | ((copy) << 0))
@@ -1233,6 +1252,11 @@ static const struct samsung_cpu_clock exynos4210_cpu_clks[] __initconst = {
CLK_CPU_NEEDS_DEBUG_ALT_DIV | CLK_CPU_HAS_DIV1, 0x14200, e4210_armclk_d),
};
+static const struct samsung_cpu_clock exynos4212_cpu_clks[] __initconst = {
+ CPU_CLK(CLK_ARM_CLK, "armclk", CLK_MOUT_APLL, CLK_MOUT_MPLL_USER_C,
+ CLK_CPU_NEEDS_DEBUG_ALT_DIV | CLK_CPU_HAS_DIV1, 0x14200, e4212_armclk_d),
+};
+
static const struct samsung_cpu_clock exynos4412_cpu_clks[] __initconst = {
CPU_CLK(CLK_ARM_CLK, "armclk", CLK_MOUT_APLL, CLK_MOUT_MPLL_USER_C,
CLK_CPU_NEEDS_DEBUG_ALT_DIV | CLK_CPU_HAS_DIV1, 0x14200, e4412_armclk_d),
@@ -1326,11 +1350,15 @@ static void __init exynos4_clk_init(struct device_node *np,
samsung_clk_register_fixed_factor(ctx,
exynos4x12_fixed_factor_clks,
ARRAY_SIZE(exynos4x12_fixed_factor_clks));
- samsung_clk_register_cpu(ctx, exynos4412_cpu_clks,
- ARRAY_SIZE(exynos4412_cpu_clks));
+ if (soc == EXYNOS4412)
+ samsung_clk_register_cpu(ctx, exynos4412_cpu_clks,
+ ARRAY_SIZE(exynos4412_cpu_clks));
+ else
+ samsung_clk_register_cpu(ctx, exynos4212_cpu_clks,
+ ARRAY_SIZE(exynos4212_cpu_clks));
}
- if (soc == EXYNOS4X12)
+ if (soc == EXYNOS4412 || soc == EXYNOS4212)
exynos4x12_core_down_clock();
samsung_clk_extended_sleep_init(reg_base,
@@ -1363,8 +1391,14 @@ static void __init exynos4210_clk_init(struct device_node *np)
}
CLK_OF_DECLARE(exynos4210_clk, "samsung,exynos4210-clock", exynos4210_clk_init);
+static void __init exynos4212_clk_init(struct device_node *np)
+{
+ exynos4_clk_init(np, EXYNOS4212);
+}
+CLK_OF_DECLARE(exynos4212_clk, "samsung,exynos4212-clock", exynos4212_clk_init);
+
static void __init exynos4412_clk_init(struct device_node *np)
{
- exynos4_clk_init(np, EXYNOS4X12);
+ exynos4_clk_init(np, EXYNOS4412);
}
CLK_OF_DECLARE(exynos4412_clk, "samsung,exynos4412-clock", exynos4412_clk_init);
--
2.40.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 07/12] Revert "media: exynos4-is: Remove dependency on obsolete SoC support"
2023-04-16 10:16 [PATCH 00/12] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards Artur Weber
` (5 preceding siblings ...)
2023-04-16 10:16 ` [PATCH 06/12] clk: samsung: Re-add support for Exynos4212 CPU clock Artur Weber
@ 2023-04-16 10:16 ` Artur Weber
2023-04-16 10:16 ` [PATCH 08/12] Revert "phy: Remove SOC_EXYNOS4212 dep. from PHY_EXYNOS4X12_USB" Artur Weber
` (5 subsequent siblings)
12 siblings, 0 replies; 19+ messages in thread
From: Artur Weber @ 2023-04-16 10:16 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Alim Akhtar, Rob Herring, Sylwester Nawrocki, Tomasz Figa,
Chanwoo Choi, Michael Turquette, Stephen Boyd, Arnd Bergmann,
Olof Johansson, soc, Russell King, Daniel Lezcano, Kukjin Kim,
Mauro Carvalho Chehab, Vinod Koul, Kishon Vijay Abraham I,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel,
linux-clk, linux-pm, linux-media, linux-phy,
~postmarketos/upstreaming, Artur Weber
The platform was originally dropped in commit bca9085e0ae9 ("ARM:
dts: exynos: remove Exynos4212 support (dead code)"), as there were
no boards using it.
We will be adding a device that uses it, so add it back.
This reverts commit 2d41a0c9ae51ac363d107f2510022106e7234b33.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
drivers/media/platform/samsung/exynos4-is/Kconfig | 2 +-
drivers/media/platform/samsung/exynos4-is/fimc-core.c | 2 +-
drivers/media/platform/samsung/exynos4-is/fimc-lite.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/media/platform/samsung/exynos4-is/Kconfig b/drivers/media/platform/samsung/exynos4-is/Kconfig
index da33faa7132e..7f9ba053dd8e 100644
--- a/drivers/media/platform/samsung/exynos4-is/Kconfig
+++ b/drivers/media/platform/samsung/exynos4-is/Kconfig
@@ -47,7 +47,7 @@ config VIDEO_S5P_MIPI_CSIS
config VIDEO_EXYNOS_FIMC_LITE
tristate "EXYNOS FIMC-LITE camera interface driver"
depends on I2C
- depends on SOC_EXYNOS4412 || SOC_EXYNOS5250 || COMPILE_TEST
+ depends on SOC_EXYNOS4212 || SOC_EXYNOS4412 || SOC_EXYNOS5250 || COMPILE_TEST
depends on HAS_DMA
select VIDEOBUF2_DMA_CONTIG
select VIDEO_EXYNOS4_IS_COMMON
diff --git a/drivers/media/platform/samsung/exynos4-is/fimc-core.c b/drivers/media/platform/samsung/exynos4-is/fimc-core.c
index 1791100b6935..e2f394e60dee 100644
--- a/drivers/media/platform/samsung/exynos4-is/fimc-core.c
+++ b/drivers/media/platform/samsung/exynos4-is/fimc-core.c
@@ -1129,7 +1129,7 @@ static const struct fimc_drvdata fimc_drvdata_exynos4210 = {
.out_buf_count = 32,
};
-/* EXYNOS4412 */
+/* EXYNOS4212, EXYNOS4412 */
static const struct fimc_drvdata fimc_drvdata_exynos4x12 = {
.num_entities = 4,
.lclk_frequency = 166000000UL,
diff --git a/drivers/media/platform/samsung/exynos4-is/fimc-lite.c b/drivers/media/platform/samsung/exynos4-is/fimc-lite.c
index e185a40305a8..f80047095f30 100644
--- a/drivers/media/platform/samsung/exynos4-is/fimc-lite.c
+++ b/drivers/media/platform/samsung/exynos4-is/fimc-lite.c
@@ -1619,7 +1619,7 @@ static const struct dev_pm_ops fimc_lite_pm_ops = {
NULL)
};
-/* EXYNOS4412 */
+/* EXYNOS4212, EXYNOS4412 */
static struct flite_drvdata fimc_lite_drvdata_exynos4 = {
.max_width = 8192,
.max_height = 8192,
--
2.40.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 08/12] Revert "phy: Remove SOC_EXYNOS4212 dep. from PHY_EXYNOS4X12_USB"
2023-04-16 10:16 [PATCH 00/12] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards Artur Weber
` (6 preceding siblings ...)
2023-04-16 10:16 ` [PATCH 07/12] Revert "media: exynos4-is: Remove dependency on obsolete SoC support" Artur Weber
@ 2023-04-16 10:16 ` Artur Weber
2023-04-16 10:16 ` [PATCH 09/12] ARM: dts: Move common Exynos4x12 definitions to exynos4x12.dtsi Artur Weber
` (4 subsequent siblings)
12 siblings, 0 replies; 19+ messages in thread
From: Artur Weber @ 2023-04-16 10:16 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Alim Akhtar, Rob Herring, Sylwester Nawrocki, Tomasz Figa,
Chanwoo Choi, Michael Turquette, Stephen Boyd, Arnd Bergmann,
Olof Johansson, soc, Russell King, Daniel Lezcano, Kukjin Kim,
Mauro Carvalho Chehab, Vinod Koul, Kishon Vijay Abraham I,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel,
linux-clk, linux-pm, linux-media, linux-phy,
~postmarketos/upstreaming, Artur Weber
The platform was originally dropped in commit bca9085e0ae9 ("ARM:
dts: exynos: remove Exynos4212 support (dead code)"), as there were
no boards using it.
We will be adding a device that uses it, so add it back.
This reverts commit fee7e1d50c6e6da1d99035181ba5a5c88f5bb526.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
drivers/phy/samsung/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig
index 3ccaabf2850a..f10afa3d7ff5 100644
--- a/drivers/phy/samsung/Kconfig
+++ b/drivers/phy/samsung/Kconfig
@@ -59,7 +59,7 @@ config PHY_EXYNOS4210_USB2
config PHY_EXYNOS4X12_USB2
bool
depends on PHY_SAMSUNG_USB2
- default SOC_EXYNOS3250 || SOC_EXYNOS4412
+ default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
config PHY_EXYNOS5250_USB2
bool
--
2.40.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 09/12] ARM: dts: Move common Exynos4x12 definitions to exynos4x12.dtsi
2023-04-16 10:16 [PATCH 00/12] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards Artur Weber
` (7 preceding siblings ...)
2023-04-16 10:16 ` [PATCH 08/12] Revert "phy: Remove SOC_EXYNOS4212 dep. from PHY_EXYNOS4X12_USB" Artur Weber
@ 2023-04-16 10:16 ` Artur Weber
2023-04-16 10:16 ` [PATCH 10/12] ARM: dts: Re-introduce Exynos4212 DTSI Artur Weber
` (3 subsequent siblings)
12 siblings, 0 replies; 19+ messages in thread
From: Artur Weber @ 2023-04-16 10:16 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Alim Akhtar, Rob Herring, Sylwester Nawrocki, Tomasz Figa,
Chanwoo Choi, Michael Turquette, Stephen Boyd, Arnd Bergmann,
Olof Johansson, soc, Russell King, Daniel Lezcano, Kukjin Kim,
Mauro Carvalho Chehab, Vinod Koul, Kishon Vijay Abraham I,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel,
linux-clk, linux-pm, linux-media, linux-phy,
~postmarketos/upstreaming, Artur Weber
In preparation for the re-introduction of the Exynos4212, move
their shared definitions to a separate file. Rename the pinctrl
definitions accordingly, and adapt the Exynos4412 DTSI to these
changes.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
arch/arm/boot/dts/exynos4412.dtsi | 645 +----------------
...2-pinctrl.dtsi => exynos4x12-pinctrl.dtsi} | 4 +-
arch/arm/boot/dts/exynos4x12.dtsi | 665 ++++++++++++++++++
3 files changed, 671 insertions(+), 643 deletions(-)
rename arch/arm/boot/dts/{exynos4412-pinctrl.dtsi => exynos4x12-pinctrl.dtsi} (99%)
create mode 100644 arch/arm/boot/dts/exynos4x12.dtsi
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 11f9dd94b6b3..c2b53f1b7a47 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -14,151 +14,11 @@
* nodes can be added to this file.
*/
-#include "exynos4.dtsi"
-
-#include "exynos4-cpu-thermal.dtsi"
+#include "exynos4x12.dtsi"
/ {
compatible = "samsung,exynos4412", "samsung,exynos4";
- aliases {
- pinctrl0 = &pinctrl_0;
- pinctrl1 = &pinctrl_1;
- pinctrl2 = &pinctrl_2;
- pinctrl3 = &pinctrl_3;
- fimc-lite0 = &fimc_lite_0;
- fimc-lite1 = &fimc_lite_1;
- mshc0 = &mshc_0;
- };
-
- bus_acp: bus-acp {
- compatible = "samsung,exynos-bus";
- clocks = <&clock CLK_DIV_ACP>;
- clock-names = "bus";
- operating-points-v2 = <&bus_acp_opp_table>;
- status = "disabled";
-
- bus_acp_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- };
- opp-134000000 {
- opp-hz = /bits/ 64 <134000000>;
- };
- opp-160000000 {
- opp-hz = /bits/ 64 <160000000>;
- };
- opp-267000000 {
- opp-hz = /bits/ 64 <267000000>;
- };
- };
- };
-
- bus_c2c: bus-c2c {
- compatible = "samsung,exynos-bus";
- clocks = <&clock CLK_DIV_C2C>;
- clock-names = "bus";
- operating-points-v2 = <&bus_dmc_opp_table>;
- status = "disabled";
- };
-
- bus_dmc: bus-dmc {
- compatible = "samsung,exynos-bus";
- clocks = <&clock CLK_DIV_DMC>;
- clock-names = "bus";
- operating-points-v2 = <&bus_dmc_opp_table>;
- samsung,data-clock-ratio = <4>;
- #interconnect-cells = <0>;
- status = "disabled";
- };
-
- bus_display: bus-display {
- compatible = "samsung,exynos-bus";
- clocks = <&clock CLK_ACLK160>;
- clock-names = "bus";
- operating-points-v2 = <&bus_display_opp_table>;
- interconnects = <&bus_leftbus &bus_dmc>;
- #interconnect-cells = <0>;
- status = "disabled";
-
- bus_display_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-160000000 {
- opp-hz = /bits/ 64 <160000000>;
- };
- opp-200000000 {
- opp-hz = /bits/ 64 <200000000>;
- };
- };
- };
-
- bus_fsys: bus-fsys {
- compatible = "samsung,exynos-bus";
- clocks = <&clock CLK_ACLK133>;
- clock-names = "bus";
- operating-points-v2 = <&bus_fsys_opp_table>;
- status = "disabled";
-
- bus_fsys_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- };
- opp-134000000 {
- opp-hz = /bits/ 64 <134000000>;
- };
- };
- };
-
- bus_leftbus: bus-leftbus {
- compatible = "samsung,exynos-bus";
- clocks = <&clock CLK_DIV_GDL>;
- clock-names = "bus";
- operating-points-v2 = <&bus_leftbus_opp_table>;
- interconnects = <&bus_dmc>;
- #interconnect-cells = <0>;
- status = "disabled";
- };
-
- bus_mfc: bus-mfc {
- compatible = "samsung,exynos-bus";
- clocks = <&clock CLK_SCLK_MFC>;
- clock-names = "bus";
- operating-points-v2 = <&bus_leftbus_opp_table>;
- status = "disabled";
- };
-
- bus_peri: bus-peri {
- compatible = "samsung,exynos-bus";
- clocks = <&clock CLK_ACLK100>;
- clock-names = "bus";
- operating-points-v2 = <&bus_peri_opp_table>;
- status = "disabled";
-
- bus_peri_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-50000000 {
- opp-hz = /bits/ 64 <50000000>;
- };
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- };
- };
- };
-
- bus_rightbus: bus-rightbus {
- compatible = "samsung,exynos-bus";
- clocks = <&clock CLK_DIV_GDR>;
- clock-names = "bus";
- operating-points-v2 = <&bus_leftbus_opp_table>;
- status = "disabled";
- };
-
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -298,499 +158,20 @@ cpu0_opp_1500: opp-1500000000 {
turbo-mode;
};
};
+};
- bus_dmc_opp_table: opp-table-1 {
- compatible = "operating-points-v2";
-
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- opp-microvolt = <900000>;
- };
- opp-134000000 {
- opp-hz = /bits/ 64 <134000000>;
- opp-microvolt = <900000>;
- };
- opp-160000000 {
- opp-hz = /bits/ 64 <160000000>;
- opp-microvolt = <900000>;
- };
- opp-267000000 {
- opp-hz = /bits/ 64 <267000000>;
- opp-microvolt = <950000>;
- };
- opp-400000000 {
- opp-hz = /bits/ 64 <400000000>;
- opp-microvolt = <1050000>;
- opp-suspend;
- };
- };
-
- bus_leftbus_opp_table: opp-table-2 {
- compatible = "operating-points-v2";
-
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- opp-microvolt = <900000>;
- };
- opp-134000000 {
- opp-hz = /bits/ 64 <134000000>;
- opp-microvolt = <925000>;
- };
- opp-160000000 {
- opp-hz = /bits/ 64 <160000000>;
- opp-microvolt = <950000>;
- };
- opp-200000000 {
- opp-hz = /bits/ 64 <200000000>;
- opp-microvolt = <1000000>;
- opp-suspend;
- };
- };
-
- soc: soc {
-
- pinctrl_0: pinctrl@11400000 {
- compatible = "samsung,exynos4x12-pinctrl";
- reg = <0x11400000 0x1000>;
- interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- pinctrl_1: pinctrl@11000000 {
- compatible = "samsung,exynos4x12-pinctrl";
- reg = <0x11000000 0x1000>;
- interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-
- wakup_eint: wakeup-interrupt-controller {
- compatible = "samsung,exynos4210-wakeup-eint";
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
- pinctrl_2: pinctrl@3860000 {
- compatible = "samsung,exynos4x12-pinctrl";
- reg = <0x03860000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <10 0>;
- };
-
- pinctrl_3: pinctrl@106e0000 {
- compatible = "samsung,exynos4x12-pinctrl";
- reg = <0x106e0000 0x1000>;
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- sram@2020000 {
- compatible = "mmio-sram";
- reg = <0x02020000 0x40000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x02020000 0x40000>;
-
- smp-sram@0 {
- compatible = "samsung,exynos4210-sysram";
- reg = <0x0 0x1000>;
- };
-
- smp-sram@2f000 {
- compatible = "samsung,exynos4210-sysram-ns";
- reg = <0x2f000 0x1000>;
- };
- };
-
- pd_isp: power-domain@10023ca0 {
- compatible = "samsung,exynos4210-pd";
- reg = <0x10023ca0 0x20>;
- #power-domain-cells = <0>;
- label = "ISP";
- };
-
- l2c: cache-controller@10502000 {
- compatible = "arm,pl310-cache";
- reg = <0x10502000 0x1000>;
- cache-unified;
- cache-level = <2>;
- prefetch-data = <1>;
- prefetch-instr = <1>;
- arm,tag-latency = <2 2 1>;
- arm,data-latency = <3 2 1>;
- arm,double-linefill = <1>;
- arm,double-linefill-incr = <0>;
- arm,double-linefill-wrap = <1>;
- arm,prefetch-drop = <1>;
- arm,prefetch-offset = <7>;
- };
-
- clock: clock-controller@10030000 {
- compatible = "samsung,exynos4412-clock";
- reg = <0x10030000 0x18000>;
- #clock-cells = <1>;
- };
-
- isp_clock: clock-controller@10048000 {
- compatible = "samsung,exynos4412-isp-clock";
- reg = <0x10048000 0x1000>;
- #clock-cells = <1>;
- power-domains = <&pd_isp>;
- clocks = <&clock CLK_ACLK200>,
- <&clock CLK_ACLK400_MCUISP>;
- clock-names = "aclk200", "aclk400_mcuisp";
- };
-
- timer@10050000 {
- compatible = "samsung,exynos4412-mct";
- reg = <0x10050000 0x800>;
- clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
- clock-names = "fin_pll", "mct";
- interrupts-extended = <&gic GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
- <&combiner 12 5>,
- <&combiner 12 6>,
- <&combiner 12 7>,
- <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- watchdog: watchdog@10060000 {
- compatible = "samsung,exynos5250-wdt";
- reg = <0x10060000 0x100>;
- interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_WDT>;
- clock-names = "watchdog";
- samsung,syscon-phandle = <&pmu_system_controller>;
- };
-
- adc: adc@126c0000 {
- compatible = "samsung,exynos4212-adc";
- reg = <0x126c0000 0x100>;
- interrupt-parent = <&combiner>;
- interrupts = <10 3>;
- clocks = <&clock CLK_TSADC>;
- clock-names = "adc";
- #io-channel-cells = <1>;
- samsung,syscon-phandle = <&pmu_system_controller>;
- status = "disabled";
- };
-
- g2d: g2d@10800000 {
- compatible = "samsung,exynos4212-g2d";
- reg = <0x10800000 0x1000>;
- interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
- clock-names = "sclk_fimg2d", "fimg2d";
- iommus = <&sysmmu_g2d>;
- };
-
- mshc_0: mmc@12550000 {
- compatible = "samsung,exynos4412-dw-mshc";
- reg = <0x12550000 0x1000>;
- interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- fifo-depth = <0x80>;
- clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>;
- clock-names = "biu", "ciu";
- status = "disabled";
- };
-
- sysmmu_g2d: sysmmu@10a40000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x10a40000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <4 7>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
- #iommu-cells = <0>;
- };
-
- sysmmu_fimc_isp: sysmmu@12260000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x12260000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <16 2>;
- power-domains = <&pd_isp>;
- clock-names = "sysmmu";
- clocks = <&isp_clock CLK_ISP_SMMU_ISP>;
- #iommu-cells = <0>;
- };
-
- sysmmu_fimc_drc: sysmmu@12270000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x12270000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <16 3>;
- power-domains = <&pd_isp>;
- clock-names = "sysmmu";
- clocks = <&isp_clock CLK_ISP_SMMU_DRC>;
- #iommu-cells = <0>;
- };
-
- sysmmu_fimc_fd: sysmmu@122a0000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x122a0000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <16 4>;
- power-domains = <&pd_isp>;
- clock-names = "sysmmu";
- clocks = <&isp_clock CLK_ISP_SMMU_FD>;
- #iommu-cells = <0>;
- };
-
- sysmmu_fimc_mcuctl: sysmmu@122b0000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x122b0000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <16 5>;
- power-domains = <&pd_isp>;
- clock-names = "sysmmu";
- clocks = <&isp_clock CLK_ISP_SMMU_ISPCX>;
- #iommu-cells = <0>;
- };
-
- sysmmu_fimc_lite0: sysmmu@123b0000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x123b0000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <16 0>;
- power-domains = <&pd_isp>;
- clock-names = "sysmmu", "master";
- clocks = <&isp_clock CLK_ISP_SMMU_LITE0>,
- <&isp_clock CLK_ISP_FIMC_LITE0>;
- #iommu-cells = <0>;
- };
-
- sysmmu_fimc_lite1: sysmmu@123c0000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x123c0000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <16 1>;
- power-domains = <&pd_isp>;
- clock-names = "sysmmu", "master";
- clocks = <&isp_clock CLK_ISP_SMMU_LITE1>,
- <&isp_clock CLK_ISP_FIMC_LITE1>;
- #iommu-cells = <0>;
- };
- };
+&clock {
+ compatible = "samsung,exynos4412-clock";
};
&combiner {
samsung,combiner-nr = <20>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&camera {
- clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
- <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
- clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
-
- /* fimc_[0-3] are configured outside, under phandles */
- fimc_lite_0: fimc-lite@12390000 {
- compatible = "samsung,exynos4212-fimc-lite";
- reg = <0x12390000 0x1000>;
- interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&pd_isp>;
- clocks = <&isp_clock CLK_ISP_FIMC_LITE0>;
- clock-names = "flite";
- iommus = <&sysmmu_fimc_lite0>;
- status = "disabled";
- };
-
- fimc_lite_1: fimc-lite@123a0000 {
- compatible = "samsung,exynos4212-fimc-lite";
- reg = <0x123a0000 0x1000>;
- interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&pd_isp>;
- clocks = <&isp_clock CLK_ISP_FIMC_LITE1>;
- clock-names = "flite";
- iommus = <&sysmmu_fimc_lite1>;
- status = "disabled";
- };
-
- fimc_is: fimc-is@12000000 {
- compatible = "samsung,exynos4212-fimc-is";
- reg = <0x12000000 0x260000>;
- interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&pd_isp>;
- clocks = <&isp_clock CLK_ISP_FIMC_LITE0>,
- <&isp_clock CLK_ISP_FIMC_LITE1>,
- <&isp_clock CLK_ISP_PPMUISPX>,
- <&isp_clock CLK_ISP_PPMUISPMX>,
- <&isp_clock CLK_ISP_FIMC_ISP>,
- <&isp_clock CLK_ISP_FIMC_DRC>,
- <&isp_clock CLK_ISP_FIMC_FD>,
- <&isp_clock CLK_ISP_MCUISP>,
- <&isp_clock CLK_ISP_GICISP>,
- <&isp_clock CLK_ISP_MCUCTL_ISP>,
- <&isp_clock CLK_ISP_PWM_ISP>,
- <&isp_clock CLK_ISP_DIV_ISP0>,
- <&isp_clock CLK_ISP_DIV_ISP1>,
- <&isp_clock CLK_ISP_DIV_MCUISP0>,
- <&isp_clock CLK_ISP_DIV_MCUISP1>,
- <&clock CLK_MOUT_MPLL_USER_T>,
- <&clock CLK_ACLK200>,
- <&clock CLK_ACLK400_MCUISP>,
- <&clock CLK_DIV_ACLK200>,
- <&clock CLK_DIV_ACLK400_MCUISP>,
- <&clock CLK_UART_ISP_SCLK>;
- clock-names = "lite0", "lite1", "ppmuispx",
- "ppmuispmx", "isp",
- "drc", "fd", "mcuisp",
- "gicisp", "mcuctl_isp", "pwm_isp",
- "ispdiv0", "ispdiv1", "mcuispdiv0",
- "mcuispdiv1", "mpll", "aclk200",
- "aclk400mcuisp", "div_aclk200",
- "div_aclk400mcuisp", "uart";
- iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
- <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
- iommu-names = "isp", "drc", "fd", "mcuctl";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- status = "disabled";
-
- pmu@10020000 {
- reg = <0x10020000 0x3000>;
- };
-
- i2c1_isp: i2c-isp@12140000 {
- compatible = "samsung,exynos4212-i2c-isp";
- reg = <0x12140000 0x100>;
- clocks = <&isp_clock CLK_ISP_I2C1_ISP>;
- clock-names = "i2c_isp";
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-};
-
-&exynos_usbphy {
- compatible = "samsung,exynos4x12-usb2-phy";
- samsung,sysreg-phandle = <&sys_reg>;
-};
-
-&fimc_0 {
- compatible = "samsung,exynos4212-fimc";
- samsung,pix-limits = <4224 8192 1920 4224>;
- samsung,mainscaler-ext;
- samsung,isp-wb;
- samsung,cam-if;
-};
-
-&fimc_1 {
- compatible = "samsung,exynos4212-fimc";
- samsung,pix-limits = <4224 8192 1920 4224>;
- samsung,mainscaler-ext;
- samsung,isp-wb;
- samsung,cam-if;
-};
-
-&fimc_2 {
- compatible = "samsung,exynos4212-fimc";
- samsung,pix-limits = <4224 8192 1920 4224>;
- samsung,mainscaler-ext;
- samsung,isp-wb;
- samsung,lcd-wb;
- samsung,cam-if;
-};
-
-&fimc_3 {
- compatible = "samsung,exynos4212-fimc";
- samsung,pix-limits = <1920 8192 1366 1920>;
- samsung,rotators = <0>;
- samsung,mainscaler-ext;
- samsung,isp-wb;
- samsung,lcd-wb;
};
&gic {
cpu-offset = <0x4000>;
};
-&gpu {
- interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "gp",
- "gpmmu",
- "pp0",
- "ppmmu0",
- "pp1",
- "ppmmu1",
- "pp2",
- "ppmmu2",
- "pp3",
- "ppmmu3",
- "pmu";
- operating-points-v2 = <&gpu_opp_table>;
-
- gpu_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-160000000 {
- opp-hz = /bits/ 64 <160000000>;
- opp-microvolt = <875000>;
- };
- opp-267000000 {
- opp-hz = /bits/ 64 <267000000>;
- opp-microvolt = <900000>;
- };
- opp-350000000 {
- opp-hz = /bits/ 64 <350000000>;
- opp-microvolt = <950000>;
- };
- opp-440000000 {
- opp-hz = /bits/ 64 <440000000>;
- opp-microvolt = <1025000>;
- };
- };
-};
-
-&hdmi {
- compatible = "samsung,exynos4212-hdmi";
-};
-
-&jpeg_codec {
- compatible = "samsung,exynos4212-jpeg";
-};
-
-&rotator {
- compatible = "samsung,exynos4212-rotator";
-};
-
-&mixer {
- compatible = "samsung,exynos4212-mixer";
- clock-names = "mixer", "hdmi", "sclk_hdmi", "vp";
- clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
- <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>;
- interconnects = <&bus_display &bus_dmc>;
-};
-
&pmu {
interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
@@ -799,22 +180,4 @@ &pmu {
&pmu_system_controller {
compatible = "samsung,exynos4412-pmu", "syscon";
- clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
- "clkout4", "clkout8", "clkout9";
- clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
- <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
- <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>;
- #clock-cells = <1>;
};
-
-&tmu {
- compatible = "samsung,exynos4412-tmu";
- interrupt-parent = <&combiner>;
- interrupts = <2 4>;
- reg = <0x100c0000 0x100>;
- clocks = <&clock CLK_TMU_APBIF>;
- clock-names = "tmu_apbif";
- status = "disabled";
-};
-
-#include "exynos4412-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
similarity index 99%
rename from arch/arm/boot/dts/exynos4412-pinctrl.dtsi
rename to arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
index 8ab31c3daa48..9f7ea5f2a91f 100644
--- a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -1,11 +1,11 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Samsung's Exynos4412 SoCs pin-mux and pin-config device tree source
+ * Samsung's Exynos4x12 SoCs pin-mux and pin-config device tree source
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * Samsung's Exynos4412 SoCs pin-mux and pin-config optiosn are listed as device
+ * Samsung's Exynos4x12 SoCs pin-mux and pin-config optiosn are listed as device
* tree nodes are listed in this file.
*/
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
new file mode 100644
index 000000000000..76118a34e540
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -0,0 +1,665 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4x12 SoC device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung's Exynos4x12 SoC series device nodes are listed in this file. Particular
+ * SoCs from Exynos4x12 series can include this file and provide values for SoCs
+ * specfic bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4x12 SoC. As device tree coverage for Exynos4x12 increases, additional
+ * nodes can be added to this file.
+ */
+
+#include "exynos4.dtsi"
+
+#include "exynos4-cpu-thermal.dtsi"
+
+/ {
+ aliases {
+ pinctrl0 = &pinctrl_0;
+ pinctrl1 = &pinctrl_1;
+ pinctrl2 = &pinctrl_2;
+ pinctrl3 = &pinctrl_3;
+ fimc-lite0 = &fimc_lite_0;
+ fimc-lite1 = &fimc_lite_1;
+ mshc0 = &mshc_0;
+ };
+
+ bus_acp: bus-acp {
+ compatible = "samsung,exynos-bus";
+ clocks = <&clock CLK_DIV_ACP>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_acp_opp_table>;
+ status = "disabled";
+
+ bus_acp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+ opp-134000000 {
+ opp-hz = /bits/ 64 <134000000>;
+ };
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ };
+ opp-267000000 {
+ opp-hz = /bits/ 64 <267000000>;
+ };
+ };
+ };
+
+ bus_c2c: bus-c2c {
+ compatible = "samsung,exynos-bus";
+ clocks = <&clock CLK_DIV_C2C>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_dmc_opp_table>;
+ status = "disabled";
+ };
+
+ bus_dmc: bus-dmc {
+ compatible = "samsung,exynos-bus";
+ clocks = <&clock CLK_DIV_DMC>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_dmc_opp_table>;
+ samsung,data-clock-ratio = <4>;
+ #interconnect-cells = <0>;
+ status = "disabled";
+ };
+
+ bus_display: bus-display {
+ compatible = "samsung,exynos-bus";
+ clocks = <&clock CLK_ACLK160>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_display_opp_table>;
+ interconnects = <&bus_leftbus &bus_dmc>;
+ #interconnect-cells = <0>;
+ status = "disabled";
+
+ bus_display_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ };
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+ };
+ };
+
+ bus_fsys: bus-fsys {
+ compatible = "samsung,exynos-bus";
+ clocks = <&clock CLK_ACLK133>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_fsys_opp_table>;
+ status = "disabled";
+
+ bus_fsys_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+ opp-134000000 {
+ opp-hz = /bits/ 64 <134000000>;
+ };
+ };
+ };
+
+ bus_leftbus: bus-leftbus {
+ compatible = "samsung,exynos-bus";
+ clocks = <&clock CLK_DIV_GDL>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_leftbus_opp_table>;
+ interconnects = <&bus_dmc>;
+ #interconnect-cells = <0>;
+ status = "disabled";
+ };
+
+ bus_mfc: bus-mfc {
+ compatible = "samsung,exynos-bus";
+ clocks = <&clock CLK_SCLK_MFC>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_leftbus_opp_table>;
+ status = "disabled";
+ };
+
+ bus_peri: bus-peri {
+ compatible = "samsung,exynos-bus";
+ clocks = <&clock CLK_ACLK100>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_peri_opp_table>;
+ status = "disabled";
+
+ bus_peri_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ };
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+ };
+ };
+
+ bus_rightbus: bus-rightbus {
+ compatible = "samsung,exynos-bus";
+ clocks = <&clock CLK_DIV_GDR>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_leftbus_opp_table>;
+ status = "disabled";
+ };
+
+ bus_dmc_opp_table: opp-table-1 {
+ compatible = "operating-points-v2";
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ opp-microvolt = <900000>;
+ };
+ opp-134000000 {
+ opp-hz = /bits/ 64 <134000000>;
+ opp-microvolt = <900000>;
+ };
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ opp-microvolt = <900000>;
+ };
+ opp-267000000 {
+ opp-hz = /bits/ 64 <267000000>;
+ opp-microvolt = <950000>;
+ };
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <1050000>;
+ opp-suspend;
+ };
+ };
+
+ bus_leftbus_opp_table: opp-table-2 {
+ compatible = "operating-points-v2";
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ opp-microvolt = <900000>;
+ };
+ opp-134000000 {
+ opp-hz = /bits/ 64 <134000000>;
+ opp-microvolt = <925000>;
+ };
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ opp-microvolt = <950000>;
+ };
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <1000000>;
+ opp-suspend;
+ };
+ };
+
+ soc: soc {
+
+ pinctrl_0: pinctrl@11400000 {
+ compatible = "samsung,exynos4x12-pinctrl";
+ reg = <0x11400000 0x1000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pinctrl_1: pinctrl@11000000 {
+ compatible = "samsung,exynos4x12-pinctrl";
+ reg = <0x11000000 0x1000>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+
+ wakup_eint: wakeup-interrupt-controller {
+ compatible = "samsung,exynos4210-wakeup-eint";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ pinctrl_2: pinctrl@3860000 {
+ compatible = "samsung,exynos4x12-pinctrl";
+ reg = <0x03860000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <10 0>;
+ };
+
+ pinctrl_3: pinctrl@106e0000 {
+ compatible = "samsung,exynos4x12-pinctrl";
+ reg = <0x106e0000 0x1000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sram@2020000 {
+ compatible = "mmio-sram";
+ reg = <0x02020000 0x40000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x02020000 0x40000>;
+
+ smp-sram@0 {
+ compatible = "samsung,exynos4210-sysram";
+ reg = <0x0 0x1000>;
+ };
+
+ smp-sram@2f000 {
+ compatible = "samsung,exynos4210-sysram-ns";
+ reg = <0x2f000 0x1000>;
+ };
+ };
+
+ pd_isp: power-domain@10023ca0 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10023ca0 0x20>;
+ #power-domain-cells = <0>;
+ label = "ISP";
+ };
+
+ l2c: cache-controller@10502000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x10502000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ prefetch-data = <1>;
+ prefetch-instr = <1>;
+ arm,tag-latency = <2 2 1>;
+ arm,data-latency = <3 2 1>;
+ arm,double-linefill = <1>;
+ arm,double-linefill-incr = <0>;
+ arm,double-linefill-wrap = <1>;
+ arm,prefetch-drop = <1>;
+ arm,prefetch-offset = <7>;
+ };
+
+ clock: clock-controller@10030000 {
+ reg = <0x10030000 0x18000>;
+ #clock-cells = <1>;
+ };
+
+ isp_clock: clock-controller@10048000 {
+ compatible = "samsung,exynos4412-isp-clock";
+ reg = <0x10048000 0x1000>;
+ #clock-cells = <1>;
+ power-domains = <&pd_isp>;
+ clocks = <&clock CLK_ACLK200>,
+ <&clock CLK_ACLK400_MCUISP>;
+ clock-names = "aclk200", "aclk400_mcuisp";
+ };
+
+ timer@10050000 {
+ compatible = "samsung,exynos4412-mct";
+ reg = <0x10050000 0x800>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+ clock-names = "fin_pll", "mct";
+ interrupts-extended = <&gic GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <&combiner 12 5>,
+ <&combiner 12 6>,
+ <&combiner 12 7>,
+ <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ watchdog: watchdog@10060000 {
+ compatible = "samsung,exynos5250-wdt";
+ reg = <0x10060000 0x100>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock CLK_WDT>;
+ clock-names = "watchdog";
+ samsung,syscon-phandle = <&pmu_system_controller>;
+ };
+
+ adc: adc@126c0000 {
+ compatible = "samsung,exynos4212-adc";
+ reg = <0x126c0000 0x100>;
+ interrupt-parent = <&combiner>;
+ interrupts = <10 3>;
+ clocks = <&clock CLK_TSADC>;
+ clock-names = "adc";
+ #io-channel-cells = <1>;
+ samsung,syscon-phandle = <&pmu_system_controller>;
+ status = "disabled";
+ };
+
+ g2d: g2d@10800000 {
+ compatible = "samsung,exynos4212-g2d";
+ reg = <0x10800000 0x1000>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
+ clock-names = "sclk_fimg2d", "fimg2d";
+ iommus = <&sysmmu_g2d>;
+ };
+
+ mshc_0: mmc@12550000 {
+ compatible = "samsung,exynos4412-dw-mshc";
+ reg = <0x12550000 0x1000>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fifo-depth = <0x80>;
+ clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>;
+ clock-names = "biu", "ciu";
+ status = "disabled";
+ };
+
+ sysmmu_g2d: sysmmu@10a40000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x10a40000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <4 7>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimc_isp: sysmmu@12260000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x12260000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <16 2>;
+ power-domains = <&pd_isp>;
+ clock-names = "sysmmu";
+ clocks = <&isp_clock CLK_ISP_SMMU_ISP>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimc_drc: sysmmu@12270000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x12270000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <16 3>;
+ power-domains = <&pd_isp>;
+ clock-names = "sysmmu";
+ clocks = <&isp_clock CLK_ISP_SMMU_DRC>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimc_fd: sysmmu@122a0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x122a0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <16 4>;
+ power-domains = <&pd_isp>;
+ clock-names = "sysmmu";
+ clocks = <&isp_clock CLK_ISP_SMMU_FD>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimc_mcuctl: sysmmu@122b0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x122b0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <16 5>;
+ power-domains = <&pd_isp>;
+ clock-names = "sysmmu";
+ clocks = <&isp_clock CLK_ISP_SMMU_ISPCX>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimc_lite0: sysmmu@123b0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x123b0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <16 0>;
+ power-domains = <&pd_isp>;
+ clock-names = "sysmmu", "master";
+ clocks = <&isp_clock CLK_ISP_SMMU_LITE0>,
+ <&isp_clock CLK_ISP_FIMC_LITE0>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimc_lite1: sysmmu@123c0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x123c0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <16 1>;
+ power-domains = <&pd_isp>;
+ clock-names = "sysmmu", "master";
+ clocks = <&isp_clock CLK_ISP_SMMU_LITE1>,
+ <&isp_clock CLK_ISP_FIMC_LITE1>;
+ #iommu-cells = <0>;
+ };
+ };
+};
+
+&combiner {
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&camera {
+ clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
+ <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
+ clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
+
+ /* fimc_[0-3] are configured outside, under phandles */
+ fimc_lite_0: fimc-lite@12390000 {
+ compatible = "samsung,exynos4212-fimc-lite";
+ reg = <0x12390000 0x1000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd_isp>;
+ clocks = <&isp_clock CLK_ISP_FIMC_LITE0>;
+ clock-names = "flite";
+ iommus = <&sysmmu_fimc_lite0>;
+ status = "disabled";
+ };
+
+ fimc_lite_1: fimc-lite@123a0000 {
+ compatible = "samsung,exynos4212-fimc-lite";
+ reg = <0x123a0000 0x1000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd_isp>;
+ clocks = <&isp_clock CLK_ISP_FIMC_LITE1>;
+ clock-names = "flite";
+ iommus = <&sysmmu_fimc_lite1>;
+ status = "disabled";
+ };
+
+ fimc_is: fimc-is@12000000 {
+ compatible = "samsung,exynos4212-fimc-is";
+ reg = <0x12000000 0x260000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd_isp>;
+ clocks = <&isp_clock CLK_ISP_FIMC_LITE0>,
+ <&isp_clock CLK_ISP_FIMC_LITE1>,
+ <&isp_clock CLK_ISP_PPMUISPX>,
+ <&isp_clock CLK_ISP_PPMUISPMX>,
+ <&isp_clock CLK_ISP_FIMC_ISP>,
+ <&isp_clock CLK_ISP_FIMC_DRC>,
+ <&isp_clock CLK_ISP_FIMC_FD>,
+ <&isp_clock CLK_ISP_MCUISP>,
+ <&isp_clock CLK_ISP_GICISP>,
+ <&isp_clock CLK_ISP_MCUCTL_ISP>,
+ <&isp_clock CLK_ISP_PWM_ISP>,
+ <&isp_clock CLK_ISP_DIV_ISP0>,
+ <&isp_clock CLK_ISP_DIV_ISP1>,
+ <&isp_clock CLK_ISP_DIV_MCUISP0>,
+ <&isp_clock CLK_ISP_DIV_MCUISP1>,
+ <&clock CLK_MOUT_MPLL_USER_T>,
+ <&clock CLK_ACLK200>,
+ <&clock CLK_ACLK400_MCUISP>,
+ <&clock CLK_DIV_ACLK200>,
+ <&clock CLK_DIV_ACLK400_MCUISP>,
+ <&clock CLK_UART_ISP_SCLK>;
+ clock-names = "lite0", "lite1", "ppmuispx",
+ "ppmuispmx", "isp",
+ "drc", "fd", "mcuisp",
+ "gicisp", "mcuctl_isp", "pwm_isp",
+ "ispdiv0", "ispdiv1", "mcuispdiv0",
+ "mcuispdiv1", "mpll", "aclk200",
+ "aclk400mcuisp", "div_aclk200",
+ "div_aclk400mcuisp", "uart";
+ iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
+ <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
+ iommu-names = "isp", "drc", "fd", "mcuctl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ pmu@10020000 {
+ reg = <0x10020000 0x3000>;
+ };
+
+ i2c1_isp: i2c-isp@12140000 {
+ compatible = "samsung,exynos4212-i2c-isp";
+ reg = <0x12140000 0x100>;
+ clocks = <&isp_clock CLK_ISP_I2C1_ISP>;
+ clock-names = "i2c_isp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&exynos_usbphy {
+ compatible = "samsung,exynos4x12-usb2-phy";
+ samsung,sysreg-phandle = <&sys_reg>;
+};
+
+&fimc_0 {
+ compatible = "samsung,exynos4212-fimc";
+ samsung,pix-limits = <4224 8192 1920 4224>;
+ samsung,mainscaler-ext;
+ samsung,isp-wb;
+ samsung,cam-if;
+};
+
+&fimc_1 {
+ compatible = "samsung,exynos4212-fimc";
+ samsung,pix-limits = <4224 8192 1920 4224>;
+ samsung,mainscaler-ext;
+ samsung,isp-wb;
+ samsung,cam-if;
+};
+
+&fimc_2 {
+ compatible = "samsung,exynos4212-fimc";
+ samsung,pix-limits = <4224 8192 1920 4224>;
+ samsung,mainscaler-ext;
+ samsung,isp-wb;
+ samsung,lcd-wb;
+ samsung,cam-if;
+};
+
+&fimc_3 {
+ compatible = "samsung,exynos4212-fimc";
+ samsung,pix-limits = <1920 8192 1366 1920>;
+ samsung,rotators = <0>;
+ samsung,mainscaler-ext;
+ samsung,isp-wb;
+ samsung,lcd-wb;
+};
+
+&gpu {
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp",
+ "gpmmu",
+ "pp0",
+ "ppmmu0",
+ "pp1",
+ "ppmmu1",
+ "pp2",
+ "ppmmu2",
+ "pp3",
+ "ppmmu3",
+ "pmu";
+ operating-points-v2 = <&gpu_opp_table>;
+
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ opp-microvolt = <875000>;
+ };
+ opp-267000000 {
+ opp-hz = /bits/ 64 <267000000>;
+ opp-microvolt = <900000>;
+ };
+ opp-350000000 {
+ opp-hz = /bits/ 64 <350000000>;
+ opp-microvolt = <950000>;
+ };
+ opp-440000000 {
+ opp-hz = /bits/ 64 <440000000>;
+ opp-microvolt = <1025000>;
+ };
+ };
+};
+
+&hdmi {
+ compatible = "samsung,exynos4212-hdmi";
+};
+
+&jpeg_codec {
+ compatible = "samsung,exynos4212-jpeg";
+};
+
+&rotator {
+ compatible = "samsung,exynos4212-rotator";
+};
+
+&mixer {
+ compatible = "samsung,exynos4212-mixer";
+ clock-names = "mixer", "hdmi", "sclk_hdmi", "vp";
+ clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+ <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>;
+ interconnects = <&bus_display &bus_dmc>;
+};
+
+&pmu_system_controller {
+ clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
+ "clkout4", "clkout8", "clkout9";
+ clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
+ <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
+ <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>;
+ #clock-cells = <1>;
+};
+
+&tmu {
+ compatible = "samsung,exynos4412-tmu";
+ interrupt-parent = <&combiner>;
+ interrupts = <2 4>;
+ reg = <0x100c0000 0x100>;
+ clocks = <&clock CLK_TMU_APBIF>;
+ clock-names = "tmu_apbif";
+ status = "disabled";
+};
+
+#include "exynos4x12-pinctrl.dtsi"
--
2.40.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 10/12] ARM: dts: Re-introduce Exynos4212 DTSI
2023-04-16 10:16 [PATCH 00/12] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards Artur Weber
` (8 preceding siblings ...)
2023-04-16 10:16 ` [PATCH 09/12] ARM: dts: Move common Exynos4x12 definitions to exynos4x12.dtsi Artur Weber
@ 2023-04-16 10:16 ` Artur Weber
2023-04-16 10:16 ` [PATCH 11/12] dt-bindings: arm: samsung: Add Samsung Galaxy Tab3 family boards Artur Weber
` (2 subsequent siblings)
12 siblings, 0 replies; 19+ messages in thread
From: Artur Weber @ 2023-04-16 10:16 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Alim Akhtar, Rob Herring, Sylwester Nawrocki, Tomasz Figa,
Chanwoo Choi, Michael Turquette, Stephen Boyd, Arnd Bergmann,
Olof Johansson, soc, Russell King, Daniel Lezcano, Kukjin Kim,
Mauro Carvalho Chehab, Vinod Koul, Kishon Vijay Abraham I,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel,
linux-clk, linux-pm, linux-media, linux-phy,
~postmarketos/upstreaming, Artur Weber
The DTSI file was originally dropped in commit bca9085e0ae9 ("ARM:
dts: exynos: remove Exynos4212 support (dead code)"), as there were
no boards using it.
We will be adding a device that uses it, so add it back.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
arch/arm/boot/dts/exynos4212.dtsi | 157 ++++++++++++++++++++++++++++++
1 file changed, 157 insertions(+)
create mode 100644 arch/arm/boot/dts/exynos4212.dtsi
diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi
new file mode 100644
index 000000000000..9261c14a4489
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4212.dtsi
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4212 SoC device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung's Exynos4212 SoC device nodes are listed in this file. Exynos4212
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4212 SoC. As device tree coverage for Exynos4212 increases, additional
+ * nodes can be added to this file.
+ */
+
+#include "exynos4x12.dtsi"
+
+/ {
+ compatible = "samsung,exynos4212", "samsung,exynos4";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ };
+ };
+
+ cpu0: cpu@a00 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xa00>;
+ clocks = <&clock CLK_ARM_CLK>;
+ clock-names = "cpu";
+ operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>; /* min followed by max */
+ };
+
+ cpu1: cpu@a01 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xa01>;
+ clocks = <&clock CLK_ARM_CLK>;
+ clock-names = "cpu";
+ operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>; /* min followed by max */
+ };
+ };
+
+ cpu0_opp_table: opp-table-0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <900000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <900000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <925000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <950000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <975000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-700000000 {
+ opp-hz = /bits/ 64 <700000000>;
+ opp-microvolt = <987500>;
+ clock-latency-ns = <200000>;
+ };
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <200000>;
+ opp-suspend;
+ };
+ opp-900000000 {
+ opp-hz = /bits/ 64 <900000000>;
+ opp-microvolt = <1037500>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1087500>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1100000000 {
+ opp-hz = /bits/ 64 <1100000000>;
+ opp-microvolt = <1137500>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1187500>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1300000000 {
+ opp-hz = /bits/ 64 <1300000000>;
+ opp-microvolt = <1250000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1400000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-microvolt = <1287500>;
+ clock-latency-ns = <200000>;
+ };
+ cpu0_opp_1500: opp-1500000000 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-microvolt = <1350000>;
+ clock-latency-ns = <200000>;
+ turbo-mode;
+ };
+ };
+};
+
+&clock {
+ compatible = "samsung,exynos4212-clock";
+};
+
+&combiner {
+ samsung,combiner-nr = <18>;
+};
+
+&gic {
+ cpu-offset = <0x8000>;
+};
+
+&pmu {
+ interrupts = <2 2>, <3 2>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ status = "okay";
+};
+
+&pmu_system_controller {
+ compatible = "samsung,exynos4212-pmu", "syscon";
+};
--
2.40.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 11/12] dt-bindings: arm: samsung: Add Samsung Galaxy Tab3 family boards
2023-04-16 10:16 [PATCH 00/12] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards Artur Weber
` (9 preceding siblings ...)
2023-04-16 10:16 ` [PATCH 10/12] ARM: dts: Re-introduce Exynos4212 DTSI Artur Weber
@ 2023-04-16 10:16 ` Artur Weber
2023-04-16 10:16 ` [PATCH 12/12] ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards Artur Weber
2023-04-16 10:26 ` [PATCH 00/12] Re-introduce Exynos4212 support and add " Artur Weber
12 siblings, 0 replies; 19+ messages in thread
From: Artur Weber @ 2023-04-16 10:16 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Alim Akhtar, Rob Herring, Sylwester Nawrocki, Tomasz Figa,
Chanwoo Choi, Michael Turquette, Stephen Boyd, Arnd Bergmann,
Olof Johansson, soc, Russell King, Daniel Lezcano, Kukjin Kim,
Mauro Carvalho Chehab, Vinod Koul, Kishon Vijay Abraham I,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel,
linux-clk, linux-pm, linux-media, linux-phy,
~postmarketos/upstreaming, Artur Weber
Add the compatible strings for the Samsung Galaxy Tab 3 8.0 series
of tablets.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
.../bindings/arm/samsung/samsung-boards.yaml | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
index deb2cf971871..4ee026e7f7ad 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
@@ -104,6 +104,16 @@ properties:
- const: samsung,exynos4412
- const: samsung,exynos4
+ - description: Samsung Tab3 family boards
+ items:
+ - enum:
+ - samsung,t310 # Samsung Galaxy Tab 3 8.0 WiFi (SM-T310)
+ - samsung,t311 # Samsung Galaxy Tab 3 8.0 3G (SM-T311)
+ - samsung,t315 # Samsung Galaxy Tab 3 8.0 LTE (SM-T315)
+ - const: samsung,tab3
+ - const: samsung,exynos4212
+ - const: samsung,exynos4
+
- description: Exynos5250 based boards
items:
- enum:
--
2.40.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 12/12] ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards
2023-04-16 10:16 [PATCH 00/12] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards Artur Weber
` (10 preceding siblings ...)
2023-04-16 10:16 ` [PATCH 11/12] dt-bindings: arm: samsung: Add Samsung Galaxy Tab3 family boards Artur Weber
@ 2023-04-16 10:16 ` Artur Weber
2023-04-16 10:26 ` [PATCH 00/12] Re-introduce Exynos4212 support and add " Artur Weber
12 siblings, 0 replies; 19+ messages in thread
From: Artur Weber @ 2023-04-16 10:16 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Alim Akhtar, Rob Herring, Sylwester Nawrocki, Tomasz Figa,
Chanwoo Choi, Michael Turquette, Stephen Boyd, Arnd Bergmann,
Olof Johansson, soc, Russell King, Daniel Lezcano, Kukjin Kim,
Mauro Carvalho Chehab, Vinod Koul, Kishon Vijay Abraham I,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel,
linux-clk, linux-pm, linux-media, linux-phy,
~postmarketos/upstreaming, Artur Weber
Introduce support for the Galaxy Tab 3 8.0 series of boards:
- Samsung Galaxy Tab 3 8.0 WiFi (SM-T310/lt01wifi)
- Samsung Galaxy Tab 3 8.0 3G (SM-T311/lt013g)
- Samsung Galaxy Tab 3 8.0 LTE (SM-T315/lt01lte)
What works:
- Display and backlight
- Touchscreen (without touchkeys)
- GPIO buttons, hall sensor
- WiFi and Bluetooth
- USB, fuel gauge, charging (partial)
- Accelerometer and magnetometer
- WiFi model only: light sensor
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
arch/arm/boot/dts/Makefile | 3 +
arch/arm/boot/dts/exynos4212-tab3-3g8.dts | 30 +
arch/arm/boot/dts/exynos4212-tab3-lte8.dts | 43 +
arch/arm/boot/dts/exynos4212-tab3-wifi8.dts | 25 +
arch/arm/boot/dts/exynos4212-tab3.dtsi | 1175 +++++++++++++++++++
5 files changed, 1276 insertions(+)
create mode 100644 arch/arm/boot/dts/exynos4212-tab3-3g8.dts
create mode 100644 arch/arm/boot/dts/exynos4212-tab3-lte8.dts
create mode 100644 arch/arm/boot/dts/exynos4212-tab3-wifi8.dts
create mode 100644 arch/arm/boot/dts/exynos4212-tab3.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index efe4152e5846..e5f63b636637 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -217,6 +217,9 @@ dtb-$(CONFIG_ARCH_EXYNOS4) += \
exynos4210-smdkv310.dtb \
exynos4210-trats.dtb \
exynos4210-universal_c210.dtb \
+ exynos4212-tab3-3g8.dtb \
+ exynos4212-tab3-lte8.dtb \
+ exynos4212-tab3-wifi8.dtb \
exynos4412-i9300.dtb \
exynos4412-i9305.dtb \
exynos4412-itop-elite.dtb \
diff --git a/arch/arm/boot/dts/exynos4212-tab3-3g8.dts b/arch/arm/boot/dts/exynos4212-tab3-3g8.dts
new file mode 100644
index 000000000000..c503a2d351dd
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4212-tab3-3g8.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4212 based Galaxy Tab 3 8.0 WiFi board device tree
+ * source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos4212-tab3.dtsi"
+
+/ {
+ model = "Samsung Galaxy Tab 3 8.0 3G (SM-T311) based on Exynos4212";
+ compatible = "samsung,t311", "samsung,tab3", "samsung,exynos4212", "samsung,exynos4";
+ chassis-type = "tablet";
+};
+
+/* Pin control sleep state overrides */
+
+&sleep0 {
+ PIN_SLP(gpb-5, INPUT, UP);
+};
+
+&sleep1 {
+ PIN_SLP(gpl0-0, OUT0, NONE);
+ PIN_SLP(gpl1-0, OUT0, NONE);
+ PIN_SLP(gpl2-4, OUT0, NONE);
+ PIN_SLP(gpm3-3, OUT1, NONE);
+};
diff --git a/arch/arm/boot/dts/exynos4212-tab3-lte8.dts b/arch/arm/boot/dts/exynos4212-tab3-lte8.dts
new file mode 100644
index 000000000000..158c6a2e24bf
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4212-tab3-lte8.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4212 based Galaxy Tab 3 8.0 WiFi board device tree
+ * source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos4212-tab3.dtsi"
+
+/ {
+ model = "Samsung Galaxy Tab 3 8.0 LTE (SM-T315) based on Exynos4212";
+ compatible = "samsung,t315", "samsung,tab3", "samsung,exynos4212", "samsung,exynos4";
+ chassis-type = "tablet";
+};
+
+&sleep0 {
+ PIN_SLP(gpa0-4, INPUT, UP);
+ PIN_SLP(gpa0-5, INPUT, UP);
+
+ PIN_SLP(gpb-5, INPUT, UP);
+
+ PIN_SLP(gpc0-0, PREV, NONE);
+ PIN_SLP(gpc1-3, INPUT, NONE);
+
+ PIN_SLP(gpf1-6, INPUT, NONE);
+ PIN_SLP(gpf2-2, PREV, NONE);
+};
+
+&sleep1 {
+ PIN_SLP(gpl0-0, PREV, NONE);
+
+ PIN_SLP(gpl1-0, PREV, NONE);
+
+ PIN_SLP(gpl2-1, INPUT, DOWN);
+ PIN_SLP(gpl2-2, INPUT, DOWN);
+ PIN_SLP(gpl2-4, OUT0, NONE);
+ PIN_SLP(gpl2-5, PREV, NONE);
+
+ PIN_SLP(gpm3-3, OUT1, NONE);
+};
diff --git a/arch/arm/boot/dts/exynos4212-tab3-wifi8.dts b/arch/arm/boot/dts/exynos4212-tab3-wifi8.dts
new file mode 100644
index 000000000000..0527a75710d8
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4212-tab3-wifi8.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4212 based Galaxy Tab 3 8.0 WiFi board device tree
+ * source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos4212-tab3.dtsi"
+
+/ {
+ model = "Samsung Galaxy Tab 3 8.0 WiFi (SM-T310) based on Exynos4212";
+ compatible = "samsung,t310", "samsung,tab3", "samsung,exynos4212", "samsung,exynos4";
+ chassis-type = "tablet";
+};
+
+&i2c_lightsensor {
+ /* Capella Micro CM3323 color light sensor */
+ colorsensor@10 {
+ compatible = "capella,cm3323";
+ reg = <0x10>;
+ };
+};
diff --git a/arch/arm/boot/dts/exynos4212-tab3.dtsi b/arch/arm/boot/dts/exynos4212-tab3.dtsi
new file mode 100644
index 000000000000..b8ad5497506c
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4212-tab3.dtsi
@@ -0,0 +1,1175 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4212 based Galaxy Tab 3 board common source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos4212.dtsi"
+#include "exynos4412-ppmu-common.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "exynos-pinctrl.h"
+
+/ {
+ compatible = "samsung,tab3", "samsung,exynos4212", "samsung,exynos4";
+
+ memory@40000000 {
+ device_type = "memory";
+
+ /* Technically 2GB, but last 1GB is flaky, so we ignore it for now */
+ reg = <0x40000000 0x3FC00000>;
+ };
+
+ chosen {
+ stdout-path = &serial_2;
+
+ /* Default S-BOOT bootloader loads initramfs here */
+ linux,initrd-start = <0x42000000>;
+ linux,initrd-end = <0x42800000>;
+ };
+
+ firmware@204f000 {
+ compatible = "samsung,secure-firmware";
+ reg = <0x0204F000 0x1000>;
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <0>;
+ };
+
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys>;
+
+ key-power {
+ gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ label = "power";
+ debounce-interval = <10>;
+ wakeup-source;
+ };
+
+ key-up {
+ gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ label = "volume down";
+ debounce-interval = <10>;
+ };
+
+ key-down {
+ gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ label = "volume up";
+ debounce-interval = <10>;
+ };
+
+ key-home {
+ gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ label = "home";
+ debounce-interval = <10>;
+ };
+
+ switch-hall-sensor {
+ gpios = <&gpx2 4 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ linux,can-disable;
+ label = "hall effect sensor";
+ debounce-interval = <10>;
+ wakeup-source;
+ };
+ };
+
+ vbatt_reg: voltage-regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VBATT";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ backlight_reset_supply: voltage-regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "BACKLIGHT_ENVDDIO";
+ pinctrl-names = "default";
+ pinctrl-0 = <&backlight_reset>;
+ gpio = <&gpm0 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ lcd_enable_supply: voltage-regulator-3 {
+ compatible = "regulator-fixed";
+ regulator-name = "LCD_VDD_2.2V";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_en>;
+ gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>; /* LCD_EN */
+ enable-active-high;
+ };
+
+ i2c_max77693: i2c-gpio-1 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ pmic@66 {
+ compatible = "maxim,max77693";
+ interrupt-parent = <&gpx1>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max77693_irq>;
+ reg = <0x66>;
+
+ regulators {
+ esafeout1_reg: ESAFEOUT1 {
+ regulator-name = "ESAFEOUT1";
+ regulator-boot-on;
+ };
+
+ esafeout2_reg: ESAFEOUT2 {
+ regulator-name = "ESAFEOUT2";
+ };
+
+ charger_reg: CHARGER {
+ regulator-name = "CHARGER";
+ regulator-min-microamp = <60000>;
+ regulator-max-microamp = <2580000>;
+ regulator-boot-on;
+ };
+ };
+
+ charger {
+ compatible = "maxim,max77693-charger";
+
+ maxim,constant-microvolt = <4350000>;
+ maxim,min-system-microvolt = <3600000>;
+ maxim,thermal-regulation-celsius = <100>;
+ maxim,battery-overcurrent-microamp = <3500000>;
+ maxim,charge-input-threshold-microvolt = <4300000>;
+ };
+ };
+ };
+
+ i2c_max77693_fuel: i2c-gpio-2 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpy0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpy0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ fuel-gauge@36 {
+ compatible = "maxim,max17050";
+ interrupt-parent = <&gpx2>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max77693_fuel_irq>;
+ reg = <0x36>;
+
+ maxim,over-heat-temp = <500>;
+ maxim,over-volt = <4500>;
+ };
+ };
+
+ i2c_yas532_magnetometer: i2c-gpio-3 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ /* Magnetometer: Yamaha YAS532 */
+ magnetometer@2e {
+ compatible = "yamaha,yas532";
+ reg = <0x2e>;
+ iovdd-supply = <&ldo3_reg>; /* VCC_1.8V_AP */
+ mount-matrix = "-1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "-1";
+ };
+ };
+
+ i2c_lightsensor: i2c-gpio-4 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ /* WiFi model uses CM3323, 3G/LTE use CM36653 */
+ };
+
+ i2c_bl: i2c-gpio-24 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpm4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpm4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ backlight: backlight@2c {
+ compatible = "ti,lp8556";
+ reg = <0x2c>;
+ status = "okay";
+
+ bl-name = "lcd-bl";
+ dev-ctrl = /bits/ 8 <0x80>;
+ init-brt = /bits/ 8 <0x78>; /* 120 */
+
+ power-supply = <&vbatt_reg>;
+ enable-supply = <&backlight_reset_supply>;
+
+ pwms = <&pwm 1 78770 0>;
+ pwm-names = "lp8556";
+ pwm-period = <78770>;
+
+ rom_a3h {
+ rom-addr = /bits/ 8 <0xa3>;
+ rom-val = /bits/ 8 <0x5e>;
+ };
+
+ rom_a5h {
+ rom-addr = /bits/ 8 <0xa5>;
+ rom-val = /bits/ 8 <0x34>;
+ };
+
+ rom_a7h {
+ rom-addr = /bits/ 8 <0xa7>;
+ rom-val = /bits/ 8 <0xfa>;
+ };
+ };
+ };
+
+ wlan_pwrseq: sdhci3-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpm3 5 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&bus_dmc {
+ devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+ vdd-supply = <&buck1_reg>;
+ status = "okay";
+};
+
+&bus_acp {
+ devfreq = <&bus_dmc>;
+ status = "okay";
+};
+
+&bus_c2c {
+ devfreq = <&bus_dmc>;
+ status = "okay";
+};
+
+&bus_leftbus {
+ devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+ vdd-supply = <&buck3_reg>;
+ status = "okay";
+};
+
+&bus_rightbus {
+ devfreq = <&bus_leftbus>;
+ status = "okay";
+};
+
+&bus_display {
+ devfreq = <&bus_leftbus>;
+ status = "okay";
+};
+
+&bus_fsys {
+ devfreq = <&bus_leftbus>;
+ status = "okay";
+};
+
+&bus_peri {
+ devfreq = <&bus_leftbus>;
+ status = "okay";
+};
+
+&bus_mfc {
+ devfreq = <&bus_leftbus>;
+ status = "okay";
+};
+
+&cpu0 {
+ cpu0-supply = <&buck2_reg>;
+};
+
+&dsi_0 {
+ vddcore-supply = <&ldo8_reg>;
+ vddio-supply = <&ldo10_reg>;
+ samsung,burst-clock-frequency = <500000000>;
+ samsung,esc-clock-frequency = <20000000>;
+ samsung,pll-clock-frequency = <24000000>;
+ status = "okay";
+
+ panel@0 {
+ compatible = "samsung,s6d7aa0-lsl080al02";
+ reg = <0>;
+ enable-supply = <&lcd_enable_supply>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_nrst>;
+ reset-gpios = <&gpf0 4 GPIO_ACTIVE_LOW>;
+ backlight = <&backlight>;
+ };
+};
+
+&exynos_usbphy {
+ vbus-supply = <&esafeout1_reg>;
+ status = "okay";
+};
+
+&fimd {
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&buck4_reg>;
+ status = "okay";
+};
+
+&hsotg {
+ vusb_d-supply = <&ldo15_reg>;
+ vusb_a-supply = <&ldo12_reg>;
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+/* Accelerometer: K2DH/K3DH */
+&i2c_1 {
+ pinctrl-0 = <&i2c1_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ lis3dh: accelerometer@19 {
+ /* K2DH seems to be the same as lis2dh12 in terms of registers */
+ compatible = "st,lis2dh12-accel";
+ reg = <0x19>;
+
+ interrupt-parent = <&gpx0>;
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+
+ vdd-supply = <&ldo17_reg>; /* VCC_2.8V_AP */
+ vddio-supply = <&ldo3_reg>; /* VCC_1.8V_AP */
+
+ mount-matrix = "-1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "-1";
+ };
+};
+
+/* Touchscreen: MMS252 */
+&i2c_3 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <400000>;
+ pinctrl-0 = <&i2c3_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ touchscreen@48 {
+ /* Using mms114 compatible for now */
+ compatible = "melfas,mms114";
+ reg = <0x48>;
+ interrupt-parent = <&gpb>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <1280>;
+ avdd-supply = <&ldo21_reg>;
+ vdd-supply = <&ldo25_reg>;
+ };
+};
+
+/* PMIC: s5m8767 */
+&i2c_7 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <100000>;
+ pinctrl-0 = <&i2c7_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ s5m8767: pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+ interrupt-parent = <&gpx0>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
+ wakeup-source;
+
+ s5m8767,pmic-buck2-ramp-enable;
+ s5m8767,pmic-buck3-ramp-enable;
+ s5m8767,pmic-buck4-ramp-enable;
+
+ s5m8767,pmic-buck-ramp-delay = <25>;
+ s5m8767,pmic-buck-default-dvs-idx = <1>;
+
+ s5m8767,pmic-buck-dvs-gpios = <&gpm3 0 GPIO_ACTIVE_HIGH>,
+ <&gpm3 1 GPIO_ACTIVE_HIGH>,
+ <&gpm3 2 GPIO_ACTIVE_HIGH>;
+
+ s5m8767,pmic-buck-ds-gpios = <&gpf3 1 GPIO_ACTIVE_HIGH>,
+ <&gpf3 2 GPIO_ACTIVE_HIGH>,
+ <&gpf3 3 GPIO_ACTIVE_HIGH>;
+
+ s5m8767,pmic-buck2-dvs-voltage = <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1100000>, <1100000>;
+
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1100000>, <1100000>;
+
+ s5m8767,pmic-buck4-dvs-voltage = <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1100000>, <1100000>;
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VALIVE_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VM1M2_1.2V_AP";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VCC_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VCC_3.3V_MHL";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ op_mode = <1>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VMIPI_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ op_mode = <3>;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VSIL_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ op_mode = <1>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VMIPI_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ op_mode = <3>;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "VUOTG_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ op_mode = <1>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VCC_1.8V_MHL";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ op_mode = <1>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "VHSIC_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ op_mode = <1>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "VCC_2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ op_mode = <1>;
+ regulator-always-on;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "VLED_IC_1.9V";
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+ op_mode = <1>;
+ regulator-always-on;
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "VTOUCH_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ op_mode = <1>;
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "TSP_VDD_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ op_mode = <1>;
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "5M_AF_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ op_mode = <1>;
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "VTF_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ op_mode = <3>;
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "LEDA_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ op_mode = <1>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "TSP_VDD_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ op_mode = <1>;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "CAM_IO_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ op_mode = <1>;
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "VTCAM_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ op_mode = <1>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "VDD_MIF";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "VDD_ARM";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "VDD_INT";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "VDD_G3D";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "VMEM_1.2V_AP";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "CAM_ISP_CORE_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ op_mode = <1>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+
+ s5m8767_osc: clocks {
+ compatible = "samsung,s5m8767-clk";
+ #clock-cells = <1>;
+ clock-output-names = "en32khz_ap",
+ "en32khz_cp",
+ "en32khz_bt";
+ };
+ };
+};
+
+&mshc_0 {
+ broken-cd;
+ non-removable;
+ card-detect-delay = <200>;
+ vmmc-supply = <&ldo22_reg>;
+ clock-frequency = <400000000>;
+ samsung,dw-mshc-ciu-div = <0>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+ pinctrl-names = "default";
+ status = "okay";
+ bus-width = <8>;
+ cap-mmc-highspeed;
+};
+
+&pinctrl_0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sleep0>;
+
+ s5m8767_ds: s5m8767-ds {
+ samsung,pins = "gpf3-1", "gpf3-2", "gpf3-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
+ lcd_en: lcd-en {
+ samsung,pins = "gpc0-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ lcd_nrst: lcd-nrst {
+ samsung,pins = "gpf0-4";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ sleep0: sleep-state {
+ PIN_SLP(gpa0-0, INPUT, NONE);
+ PIN_SLP(gpa0-1, OUT0, NONE);
+ PIN_SLP(gpa0-2, INPUT, NONE);
+ PIN_SLP(gpa0-3, INPUT, UP);
+ PIN_SLP(gpa0-4, INPUT, DOWN); /* UP on LTE model */
+ PIN_SLP(gpa0-5, INPUT, DOWN); /* UP on LTE model */
+ PIN_SLP(gpa0-6, INPUT, DOWN);
+ PIN_SLP(gpa0-7, INPUT, DOWN);
+
+ PIN_SLP(gpa1-0, INPUT, DOWN);
+ PIN_SLP(gpa1-1, INPUT, DOWN);
+ PIN_SLP(gpa1-2, INPUT, DOWN);
+ PIN_SLP(gpa1-3, INPUT, DOWN);
+ PIN_SLP(gpa1-4, INPUT, DOWN);
+ PIN_SLP(gpa1-5, INPUT, DOWN);
+
+ PIN_SLP(gpb-0, INPUT, NONE);
+ PIN_SLP(gpb-1, INPUT, NONE);
+ PIN_SLP(gpb-2, INPUT, NONE);
+ PIN_SLP(gpb-3, INPUT, NONE);
+ PIN_SLP(gpb-4, INPUT, DOWN);
+ PIN_SLP(gpb-5, INPUT, DOWN); /* UP on all models with modem */
+ PIN_SLP(gpb-6, INPUT, DOWN);
+ PIN_SLP(gpb-7, INPUT, DOWN);
+
+ PIN_SLP(gpc0-0, INPUT, DOWN); /* PREV, NONE on LTE model */
+ PIN_SLP(gpc0-1, INPUT, DOWN);
+ PIN_SLP(gpc0-2, INPUT, DOWN);
+ PIN_SLP(gpc0-3, INPUT, DOWN);
+ PIN_SLP(gpc0-4, INPUT, DOWN);
+
+ PIN_SLP(gpc1-0, INPUT, DOWN);
+ PIN_SLP(gpc1-1, INPUT, DOWN);
+ PIN_SLP(gpc1-2, INPUT, DOWN);
+ PIN_SLP(gpc1-3, INPUT, DOWN); /* NONE on LTE model */
+ PIN_SLP(gpc1-4, INPUT, DOWN);
+
+ PIN_SLP(gpd0-0, INPUT, DOWN);
+ PIN_SLP(gpd0-1, OUT0, NONE);
+ PIN_SLP(gpd0-2, INPUT, NONE);
+ PIN_SLP(gpd0-3, INPUT, NONE);
+
+ PIN_SLP(gpd1-0, INPUT, DOWN);
+ PIN_SLP(gpd1-1, INPUT, DOWN);
+ PIN_SLP(gpd1-2, INPUT, NONE);
+ PIN_SLP(gpd1-3, INPUT, NONE);
+
+ PIN_SLP(gpf0-0, INPUT, DOWN);
+ PIN_SLP(gpf0-1, INPUT, DOWN);
+ PIN_SLP(gpf0-2, INPUT, DOWN);
+ PIN_SLP(gpf0-3, INPUT, DOWN);
+ PIN_SLP(gpf0-4, OUT0, NONE);
+ PIN_SLP(gpf0-5, OUT0, NONE);
+ PIN_SLP(gpf0-6, INPUT, DOWN);
+ PIN_SLP(gpf0-7, INPUT, DOWN);
+
+ PIN_SLP(gpf1-0, INPUT, DOWN);
+ PIN_SLP(gpf1-1, INPUT, DOWN);
+ PIN_SLP(gpf1-2, INPUT, DOWN);
+ PIN_SLP(gpf1-3, INPUT, DOWN);
+ PIN_SLP(gpf1-4, INPUT, DOWN);
+ PIN_SLP(gpf1-5, INPUT, DOWN);
+ PIN_SLP(gpf1-6, INPUT, DOWN); /* NONE on LTE model */
+ PIN_SLP(gpf1-7, INPUT, DOWN);
+
+ PIN_SLP(gpf2-0, INPUT, DOWN);
+ PIN_SLP(gpf2-1, INPUT, DOWN);
+ PIN_SLP(gpf2-2, INPUT, DOWN); /* PREV, NONE on LTE model */
+ PIN_SLP(gpf2-3, INPUT, DOWN);
+ PIN_SLP(gpf2-4, INPUT, DOWN);
+ PIN_SLP(gpf2-5, INPUT, DOWN);
+ PIN_SLP(gpf2-6, INPUT, DOWN);
+ PIN_SLP(gpf2-7, INPUT, DOWN);
+
+ PIN_SLP(gpf3-0, INPUT, DOWN);
+ PIN_SLP(gpf3-1, INPUT, DOWN);
+ PIN_SLP(gpf3-2, INPUT, DOWN);
+ PIN_SLP(gpf3-3, INPUT, DOWN);
+ PIN_SLP(gpf3-4, PREV, NONE);
+ PIN_SLP(gpf3-5, OUT0, DOWN);
+
+ PIN_SLP(gpj0-0, INPUT, DOWN);
+ PIN_SLP(gpj0-1, INPUT, DOWN);
+ PIN_SLP(gpj0-2, INPUT, DOWN);
+ PIN_SLP(gpj0-3, OUT0, NONE);
+ PIN_SLP(gpj0-4, INPUT, DOWN);
+ PIN_SLP(gpj0-5, INPUT, DOWN);
+ PIN_SLP(gpj0-6, OUT0, NONE);
+ PIN_SLP(gpj0-7, OUT0, NONE);
+
+ PIN_SLP(gpj1-0, OUT0, NONE);
+ PIN_SLP(gpj1-1, INPUT, DOWN);
+ PIN_SLP(gpj1-2, PREV, NONE);
+ PIN_SLP(gpj1-3, INPUT, DOWN);
+ PIN_SLP(gpj1-4, INPUT, DOWN);
+ };
+};
+
+&pinctrl_1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sleep1>;
+
+ max77693_irq: max77693-irq {
+ samsung,pins = "gpx1-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
+ max77693_fuel_irq: max77693-fuel-irq {
+ samsung,pins = "gpx2-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
+ s5m8767_dvs: s5m8767-dvs {
+ samsung,pins = "gpm3-0", "gpm3-1", "gpm3-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
+ s5m8767_irq: s5m8767-irq {
+ samsung,pins = "gpx0-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
+ sdhci2_cd: sdhci2-cd-irq {
+ samsung,pins = "gpx3-4";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
+ bt_shutdown: bt-shutdown-pins {
+ samsung,pins = "gpl0-6";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ bt_host_wakeup: bt-host-wakeup-pins {
+ samsung,pins = "gpx2-6";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ bt_device_wakeup: bt-device-wakeup-pins {
+ samsung,pins = "gpx3-1";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ backlight_reset: backlight-reset {
+ samsung,pins = "gpm0-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ gpio_keys: gpio-keys-pins {
+ samsung,pins = "gpx1-2", "gpx2-2", "gpx2-4", "gpx2-7", "gpx3-3";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ sleep1: sleep-state {
+ PIN_SLP(gpk0-0, PREV, NONE);
+ PIN_SLP(gpk0-1, PREV, NONE);
+ PIN_SLP(gpk0-2, PREV, NONE);
+ PIN_SLP(gpk0-3, PREV, NONE);
+ PIN_SLP(gpk0-4, PREV, NONE);
+ PIN_SLP(gpk0-5, PREV, NONE);
+ PIN_SLP(gpk0-6, PREV, NONE);
+
+ PIN_SLP(gpk1-0, INPUT, DOWN);
+ PIN_SLP(gpk1-1, INPUT, DOWN);
+ PIN_SLP(gpk1-2, INPUT, DOWN);
+ PIN_SLP(gpk1-3, PREV, NONE);
+ PIN_SLP(gpk1-4, PREV, NONE);
+ PIN_SLP(gpk1-5, PREV, NONE);
+ PIN_SLP(gpk1-6, PREV, NONE);
+
+ PIN_SLP(gpk2-0, INPUT, DOWN);
+ PIN_SLP(gpk2-1, INPUT, DOWN);
+ PIN_SLP(gpk2-2, INPUT, DOWN);
+ PIN_SLP(gpk2-3, INPUT, DOWN);
+ PIN_SLP(gpk2-4, INPUT, DOWN);
+ PIN_SLP(gpk2-5, INPUT, DOWN);
+ PIN_SLP(gpk2-6, INPUT, DOWN);
+
+ PIN_SLP(gpk3-0, OUT0, NONE);
+ PIN_SLP(gpk3-1, INPUT, NONE);
+ PIN_SLP(gpk3-2, INPUT, DOWN);
+ PIN_SLP(gpk3-3, INPUT, NONE);
+ PIN_SLP(gpk3-4, INPUT, NONE);
+ PIN_SLP(gpk3-5, INPUT, NONE);
+ PIN_SLP(gpk3-6, INPUT, NONE);
+
+ PIN_SLP(gpl0-0, INPUT, DOWN); /* OUT0 on 3G, PREV on LTE; NONE on both */
+ PIN_SLP(gpl0-1, INPUT, NONE);
+ PIN_SLP(gpl0-2, INPUT, NONE);
+ PIN_SLP(gpl0-3, INPUT, DOWN);
+ PIN_SLP(gpl0-4, INPUT, DOWN);
+ PIN_SLP(gpl0-6, PREV, NONE);
+
+ PIN_SLP(gpl1-0, INPUT, DOWN); /* OUT0 on 3G, PREV on LTE; NONE on both */
+ PIN_SLP(gpl1-1, OUT0, NONE);
+ PIN_SLP(gpl2-0, INPUT, DOWN);
+ PIN_SLP(gpl2-1, PREV, NONE); /* INPUT, DOWN on LTE */
+ PIN_SLP(gpl2-2, PREV, NONE); /* INPUT, DOWN on LTE */
+ PIN_SLP(gpl2-3, INPUT, DOWN);
+ PIN_SLP(gpl2-4, INPUT, DOWN); /* OUT0, NONE on models with modem */
+ PIN_SLP(gpl2-5, INPUT, DOWN); /* PREV, NONE on LTE */
+ PIN_SLP(gpl2-6, INPUT, DOWN);
+ PIN_SLP(gpl2-7, INPUT, DOWN);
+
+ PIN_SLP(gpm0-0, PREV, NONE);
+ PIN_SLP(gpm0-1, OUT0, NONE);
+ PIN_SLP(gpm0-2, INPUT, DOWN);
+ PIN_SLP(gpm0-3, INPUT, DOWN);
+ PIN_SLP(gpm0-4, INPUT, DOWN);
+ PIN_SLP(gpm0-5, INPUT, DOWN);
+ PIN_SLP(gpm0-6, INPUT, DOWN);
+ PIN_SLP(gpm0-7, INPUT, DOWN);
+
+ PIN_SLP(gpm1-0, INPUT, DOWN);
+ PIN_SLP(gpm1-1, INPUT, DOWN);
+ PIN_SLP(gpm1-2, INPUT, NONE);
+ PIN_SLP(gpm1-3, INPUT, NONE);
+ PIN_SLP(gpm1-4, INPUT, NONE);
+ PIN_SLP(gpm1-5, INPUT, NONE);
+ PIN_SLP(gpm1-6, OUT0, NONE);
+
+ PIN_SLP(gpm2-0, INPUT, NONE);
+ PIN_SLP(gpm2-1, INPUT, NONE);
+ PIN_SLP(gpm2-2, OUT0, NONE);
+ PIN_SLP(gpm2-3, INPUT, DOWN);
+ PIN_SLP(gpm2-4, INPUT, DOWN);
+
+ PIN_SLP(gpm3-0, PREV, NONE);
+ PIN_SLP(gpm3-1, PREV, NONE);
+ PIN_SLP(gpm3-2, PREV, NONE);
+ PIN_SLP(gpm3-3, INPUT, DOWN); /* OUT1, NONE for 3G */
+ PIN_SLP(gpm3-4, INPUT, DOWN);
+ PIN_SLP(gpm3-5, PREV, NONE);
+ PIN_SLP(gpm3-6, INPUT, DOWN);
+ PIN_SLP(gpm3-7, OUT0, NONE);
+
+ PIN_SLP(gpm4-0, INPUT, DOWN);
+ PIN_SLP(gpm4-1, INPUT, DOWN);
+ PIN_SLP(gpm4-2, INPUT, DOWN);
+ PIN_SLP(gpm4-3, INPUT, DOWN);
+ PIN_SLP(gpm4-4, PREV, NONE);
+ PIN_SLP(gpm4-5, INPUT, NONE);
+ PIN_SLP(gpm4-6, INPUT, DOWN);
+ PIN_SLP(gpm4-7, INPUT, DOWN);
+
+ PIN_SLP(gpy0-0, INPUT, DOWN);
+ PIN_SLP(gpy0-1, INPUT, DOWN);
+ PIN_SLP(gpy0-2, INPUT, NONE);
+ PIN_SLP(gpy0-3, INPUT, NONE);
+ PIN_SLP(gpy0-4, INPUT, DOWN);
+ PIN_SLP(gpy0-5, INPUT, DOWN);
+
+ PIN_SLP(gpy1-0, INPUT, DOWN);
+ PIN_SLP(gpy1-1, INPUT, DOWN);
+ PIN_SLP(gpy1-2, INPUT, DOWN);
+ PIN_SLP(gpy1-3, INPUT, DOWN);
+
+ PIN_SLP(gpy2-0, PREV, NONE);
+ PIN_SLP(gpy2-1, INPUT, DOWN);
+ PIN_SLP(gpy2-2, INPUT, NONE);
+ PIN_SLP(gpy2-3, INPUT, NONE);
+ PIN_SLP(gpy2-4, INPUT, NONE);
+ PIN_SLP(gpy2-5, INPUT, NONE);
+
+ PIN_SLP(gpy3-0, INPUT, DOWN);
+ PIN_SLP(gpy3-1, INPUT, DOWN);
+ PIN_SLP(gpy3-2, INPUT, DOWN);
+ PIN_SLP(gpy3-3, INPUT, DOWN);
+ PIN_SLP(gpy3-4, INPUT, DOWN);
+ PIN_SLP(gpy3-5, INPUT, DOWN);
+ PIN_SLP(gpy3-6, INPUT, DOWN);
+ PIN_SLP(gpy3-7, INPUT, DOWN);
+
+ PIN_SLP(gpy4-0, INPUT, DOWN);
+ PIN_SLP(gpy4-1, INPUT, DOWN);
+ PIN_SLP(gpy4-2, INPUT, DOWN);
+ PIN_SLP(gpy4-3, INPUT, DOWN);
+ PIN_SLP(gpy4-4, INPUT, DOWN);
+ PIN_SLP(gpy4-5, INPUT, DOWN);
+ PIN_SLP(gpy4-6, INPUT, DOWN);
+ PIN_SLP(gpy4-7, INPUT, DOWN);
+
+ PIN_SLP(gpy5-0, INPUT, DOWN);
+ PIN_SLP(gpy5-1, INPUT, DOWN);
+ PIN_SLP(gpy5-2, INPUT, DOWN);
+ PIN_SLP(gpy5-3, INPUT, DOWN);
+ PIN_SLP(gpy5-4, INPUT, DOWN);
+ PIN_SLP(gpy5-5, INPUT, DOWN);
+ PIN_SLP(gpy5-6, INPUT, DOWN);
+ PIN_SLP(gpy5-7, INPUT, DOWN);
+
+ PIN_SLP(gpy6-0, INPUT, DOWN);
+ PIN_SLP(gpy6-1, INPUT, DOWN);
+ PIN_SLP(gpy6-2, INPUT, DOWN);
+ PIN_SLP(gpy6-3, INPUT, DOWN);
+ PIN_SLP(gpy6-4, INPUT, DOWN);
+ PIN_SLP(gpy6-5, INPUT, DOWN);
+ PIN_SLP(gpy6-6, INPUT, DOWN);
+ PIN_SLP(gpy6-7, INPUT, DOWN);
+ };
+};
+
+&pinctrl_2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sleep2>;
+
+ sleep2: sleep-state {
+ PIN_SLP(gpz-0, INPUT, DOWN);
+ PIN_SLP(gpz-1, INPUT, DOWN);
+ PIN_SLP(gpz-2, INPUT, DOWN);
+ PIN_SLP(gpz-3, INPUT, DOWN);
+ PIN_SLP(gpz-4, INPUT, DOWN);
+ PIN_SLP(gpz-5, INPUT, DOWN);
+ PIN_SLP(gpz-6, INPUT, DOWN);
+ };
+};
+
+&pinctrl_3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sleep3>;
+
+ sleep3: sleep-state {
+ PIN_SLP(gpv0-0, INPUT, DOWN);
+ PIN_SLP(gpv0-1, INPUT, DOWN);
+ PIN_SLP(gpv0-2, INPUT, DOWN);
+ PIN_SLP(gpv0-3, INPUT, DOWN);
+ PIN_SLP(gpv0-4, INPUT, DOWN);
+ PIN_SLP(gpv0-5, INPUT, DOWN);
+ PIN_SLP(gpv0-6, INPUT, DOWN);
+ PIN_SLP(gpv0-7, INPUT, DOWN);
+
+ PIN_SLP(gpv1-0, INPUT, DOWN);
+ PIN_SLP(gpv1-1, INPUT, DOWN);
+ PIN_SLP(gpv1-2, INPUT, DOWN);
+ PIN_SLP(gpv1-3, INPUT, DOWN);
+ PIN_SLP(gpv1-4, INPUT, DOWN);
+ PIN_SLP(gpv1-5, INPUT, DOWN);
+ PIN_SLP(gpv1-6, INPUT, DOWN);
+ PIN_SLP(gpv1-7, INPUT, DOWN);
+
+ PIN_SLP(gpv2-0, INPUT, DOWN);
+ PIN_SLP(gpv2-1, INPUT, DOWN);
+ PIN_SLP(gpv2-2, INPUT, DOWN);
+ PIN_SLP(gpv2-3, INPUT, DOWN);
+ PIN_SLP(gpv2-4, INPUT, DOWN);
+ PIN_SLP(gpv2-5, INPUT, DOWN);
+ PIN_SLP(gpv2-6, INPUT, DOWN);
+ PIN_SLP(gpv2-7, INPUT, DOWN);
+
+ PIN_SLP(gpv3-0, INPUT, DOWN);
+ PIN_SLP(gpv3-1, INPUT, DOWN);
+ PIN_SLP(gpv3-2, INPUT, DOWN);
+ PIN_SLP(gpv3-3, INPUT, DOWN);
+ PIN_SLP(gpv3-4, INPUT, DOWN);
+ PIN_SLP(gpv3-5, INPUT, DOWN);
+ PIN_SLP(gpv3-6, INPUT, DOWN);
+ PIN_SLP(gpv3-7, INPUT, DOWN);
+
+ PIN_SLP(gpv4-0, INPUT, DOWN);
+ PIN_SLP(gpv4-1, INPUT, DOWN);
+ };
+};
+
+&pmu_system_controller {
+ assigned-clocks = <&pmu_system_controller 0>;
+ assigned-clock-parents = <&clock CLK_XUSBXTI>;
+};
+
+&pwm {
+ pinctrl-0 = <&pwm1_out>;
+ pinctrl-names = "default";
+ samsung,pwm-outputs = <1>;
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+ clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
+};
+
+&sdhci_2 {
+ bus-width = <4>;
+ cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
+ pinctrl-names = "default";
+ vmmc-supply = <&ldo23_reg>;
+ status = "okay";
+};
+
+&sdhci_3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ non-removable;
+ bus-width = <4>;
+
+ mmc-pwrseq = <&wlan_pwrseq>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
+ status = "okay";
+
+ /* BCM4334 Wi-Fi */
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+
+ interrupt-parent = <&gpx2>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ };
+};
+
+&serial_0 {
+ pinctrl-0 = <&uart0_data &uart0_fctl>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ /* BCM4334B0 Bluetooth */
+ bluetooth {
+ compatible = "brcm,bcm4330-bt";
+ pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
+ pinctrl-names = "default";
+ max-speed = <3000000>;
+ shutdown-gpios = <&gpl0 6 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+ clocks = <&s5m8767_osc S2MPS11_CLK_BT>;
+ };
+};
+
+&serial_1 {
+ status = "okay";
+};
+
+&serial_2 {
+ status = "okay";
+};
+
+&serial_3 {
+ status = "okay";
+};
+
+&tmu {
+ vtmu-supply = <&ldo10_reg>;
+ status = "okay";
+};
--
2.40.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 19+ messages in thread* Re: [PATCH 00/12] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards
2023-04-16 10:16 [PATCH 00/12] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards Artur Weber
` (11 preceding siblings ...)
2023-04-16 10:16 ` [PATCH 12/12] ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards Artur Weber
@ 2023-04-16 10:26 ` Artur Weber
2023-04-16 10:34 ` Krzysztof Kozlowski
12 siblings, 1 reply; 19+ messages in thread
From: Artur Weber @ 2023-04-16 10:26 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Alim Akhtar, Rob Herring, Sylwester Nawrocki, Tomasz Figa,
Chanwoo Choi, Michael Turquette, Stephen Boyd, Arnd Bergmann,
Olof Johansson, soc, Russell King, Daniel Lezcano, Kukjin Kim,
Mauro Carvalho Chehab, Vinod Koul, Kishon Vijay Abraham I,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel,
linux-clk, linux-pm, linux-media, linux-phy,
~postmarketos/upstreaming
On 16/04/2023 12:16, Artur Weber wrote:
> This patches re-introduces the Exynos4212 platform and adds support
> for the Samsung Galaxy Tab 3 8.0 series of tablets that uses it:
>
> - Samsung Galaxy Tab 3 8.0 WiFi (SM-T310/lt01wifi)
> - Samsung Galaxy Tab 3 8.0 3G (SM-T311/lt013g)
> - Samsung Galaxy Tab 3 8.0 LTE (SM-T315/lt01lte)
>
> What works:
>
> - Display and backlight
> - Touchscreen (without touchkeys)
> - GPIO buttons, hall sensor
> - WiFi and Bluetooth
> - USB, fuel gauge, charging (partial)
> - Accelerometer and magnetometer
> - WiFi model only: light sensor
This patchset depends on "[PATCH 0/3] Add Samsung S6D7AA0 panel
controller driver" for the display panel support for the Samsung Galaxy
3 8.0 boards.
>
> Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
>
> Artur Weber (12):
> dt-bindings: soc: samsung: add Exynos4212 PMU compatible
> dt-bindings: clock: add Exynos4212 clock compatible
> ARM: exynos: Re-introduce Exynos4212 support
> soc: samsung: Re-introduce Exynos4212 support
> clk: samsung: Add Exynos4212 compatible to CLKOUT driver
> clk: samsung: Re-add support for Exynos4212 CPU clock
> Revert "media: exynos4-is: Remove dependency on obsolete SoC support"
> Revert "phy: Remove SOC_EXYNOS4212 dep. from PHY_EXYNOS4X12_USB"
> ARM: dts: Move common Exynos4x12 definitions to exynos4x12.dtsi
> ARM: dts: Re-introduce Exynos4212 DTSI
> dt-bindings: arm: samsung: Add Samsung Galaxy Tab3 family boards
> ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards
>
> .../bindings/arm/samsung/samsung-boards.yaml | 10 +
> .../bindings/clock/samsung,exynos-clock.yaml | 1 +
> .../bindings/soc/samsung/exynos-pmu.yaml | 3 +
> arch/arm/boot/dts/Makefile | 3 +
> arch/arm/boot/dts/exynos4212-tab3-3g8.dts | 30 +
> arch/arm/boot/dts/exynos4212-tab3-lte8.dts | 43 +
> arch/arm/boot/dts/exynos4212-tab3-wifi8.dts | 25 +
> arch/arm/boot/dts/exynos4212-tab3.dtsi | 1175 +++++++++++++++++
> arch/arm/boot/dts/exynos4212.dtsi | 157 +++
> arch/arm/boot/dts/exynos4412.dtsi | 645 +--------
> ...2-pinctrl.dtsi => exynos4x12-pinctrl.dtsi} | 4 +-
> arch/arm/boot/dts/exynos4x12.dtsi | 665 ++++++++++
> arch/arm/mach-exynos/Kconfig | 5 +
> arch/arm/mach-exynos/common.h | 8 +
> arch/arm/mach-exynos/exynos.c | 2 +
> arch/arm/mach-exynos/firmware.c | 8 +-
> arch/arm/mach-exynos/pm.c | 2 +-
> arch/arm/mach-exynos/suspend.c | 4 +
> drivers/clk/samsung/clk-exynos-clkout.c | 3 +
> drivers/clk/samsung/clk-exynos4.c | 44 +-
> .../media/platform/samsung/exynos4-is/Kconfig | 2 +-
> .../platform/samsung/exynos4-is/fimc-core.c | 2 +-
> .../platform/samsung/exynos4-is/fimc-lite.c | 2 +-
> drivers/phy/samsung/Kconfig | 2 +-
> drivers/soc/samsung/exynos-pmu.c | 9 +
> drivers/soc/samsung/exynos-pmu.h | 2 +
> drivers/soc/samsung/exynos4-pmu.c | 13 +-
> 27 files changed, 2213 insertions(+), 656 deletions(-)
> create mode 100644 arch/arm/boot/dts/exynos4212-tab3-3g8.dts
> create mode 100644 arch/arm/boot/dts/exynos4212-tab3-lte8.dts
> create mode 100644 arch/arm/boot/dts/exynos4212-tab3-wifi8.dts
> create mode 100644 arch/arm/boot/dts/exynos4212-tab3.dtsi
> create mode 100644 arch/arm/boot/dts/exynos4212.dtsi
> rename arch/arm/boot/dts/{exynos4412-pinctrl.dtsi => exynos4x12-pinctrl.dtsi} (99%)
> create mode 100644 arch/arm/boot/dts/exynos4x12.dtsi
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [PATCH 00/12] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards
2023-04-16 10:26 ` [PATCH 00/12] Re-introduce Exynos4212 support and add " Artur Weber
@ 2023-04-16 10:34 ` Krzysztof Kozlowski
2023-04-16 10:49 ` Artur Weber
0 siblings, 1 reply; 19+ messages in thread
From: Krzysztof Kozlowski @ 2023-04-16 10:34 UTC (permalink / raw)
To: Artur Weber
Cc: Alim Akhtar, Rob Herring, Sylwester Nawrocki, Tomasz Figa,
Chanwoo Choi, Michael Turquette, Stephen Boyd, Arnd Bergmann,
Olof Johansson, soc, Russell King, Daniel Lezcano, Kukjin Kim,
Mauro Carvalho Chehab, Vinod Koul, Kishon Vijay Abraham I,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel,
linux-clk, linux-pm, linux-media, linux-phy,
~postmarketos/upstreaming
On 16/04/2023 12:26, Artur Weber wrote:
> On 16/04/2023 12:16, Artur Weber wrote:
>> This patches re-introduces the Exynos4212 platform and adds support
>> for the Samsung Galaxy Tab 3 8.0 series of tablets that uses it:
>>
>> - Samsung Galaxy Tab 3 8.0 WiFi (SM-T310/lt01wifi)
>> - Samsung Galaxy Tab 3 8.0 3G (SM-T311/lt013g)
>> - Samsung Galaxy Tab 3 8.0 LTE (SM-T315/lt01lte)
>>
>> What works:
>>
>> - Display and backlight
>> - Touchscreen (without touchkeys)
>> - GPIO buttons, hall sensor
>> - WiFi and Bluetooth
>> - USB, fuel gauge, charging (partial)
>> - Accelerometer and magnetometer
>> - WiFi model only: light sensor
>
> This patchset depends on "[PATCH 0/3] Add Samsung S6D7AA0 panel
> controller driver" for the display panel support for the Samsung Galaxy
> 3 8.0 boards.
Why? DTS and ARM code cannot depend on driver changes. Please rework
your patchsets to remove any of such dependencies.
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH 00/12] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards
2023-04-16 10:34 ` Krzysztof Kozlowski
@ 2023-04-16 10:49 ` Artur Weber
2023-04-16 10:53 ` Krzysztof Kozlowski
0 siblings, 1 reply; 19+ messages in thread
From: Artur Weber @ 2023-04-16 10:49 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Alim Akhtar, Rob Herring, Sylwester Nawrocki, Tomasz Figa,
Chanwoo Choi, Michael Turquette, Stephen Boyd, Arnd Bergmann,
Olof Johansson, soc, Russell King, Daniel Lezcano, Kukjin Kim,
Mauro Carvalho Chehab, Vinod Koul, Kishon Vijay Abraham I,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel,
linux-clk, linux-pm, linux-media, linux-phy,
~postmarketos/upstreaming
On 16/04/2023 12:34, Krzysztof Kozlowski wrote:
> On 16/04/2023 12:26, Artur Weber wrote:
>> On 16/04/2023 12:16, Artur Weber wrote:
>>> This patches re-introduces the Exynos4212 platform and adds support
>>> for the Samsung Galaxy Tab 3 8.0 series of tablets that uses it:
>>>
>>> - Samsung Galaxy Tab 3 8.0 WiFi (SM-T310/lt01wifi)
>>> - Samsung Galaxy Tab 3 8.0 3G (SM-T311/lt013g)
>>> - Samsung Galaxy Tab 3 8.0 LTE (SM-T315/lt01lte)
>>>
>>> What works:
>>>
>>> - Display and backlight
>>> - Touchscreen (without touchkeys)
>>> - GPIO buttons, hall sensor
>>> - WiFi and Bluetooth
>>> - USB, fuel gauge, charging (partial)
>>> - Accelerometer and magnetometer
>>> - WiFi model only: light sensor
>>
>> This patchset depends on "[PATCH 0/3] Add Samsung S6D7AA0 panel
>> controller driver" for the display panel support for the Samsung Galaxy
>> 3 8.0 boards.
>
> Why? DTS and ARM code cannot depend on driver changes. Please rework
> your patchsets to remove any of such dependencies.
Ah, that makes sense. I'll re-send the patchset in a second with the
panel node removed.
Best regards
Artur Weber
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH 00/12] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards
2023-04-16 10:49 ` Artur Weber
@ 2023-04-16 10:53 ` Krzysztof Kozlowski
2023-04-16 12:37 ` Artur Weber
0 siblings, 1 reply; 19+ messages in thread
From: Krzysztof Kozlowski @ 2023-04-16 10:53 UTC (permalink / raw)
To: Artur Weber
Cc: Alim Akhtar, Rob Herring, Sylwester Nawrocki, Tomasz Figa,
Chanwoo Choi, Michael Turquette, Stephen Boyd, Arnd Bergmann,
Olof Johansson, soc, Russell King, Daniel Lezcano, Kukjin Kim,
Mauro Carvalho Chehab, Vinod Koul, Kishon Vijay Abraham I,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel,
linux-clk, linux-pm, linux-media, linux-phy,
~postmarketos/upstreaming
On 16/04/2023 12:49, Artur Weber wrote:
> On 16/04/2023 12:34, Krzysztof Kozlowski wrote:
>> On 16/04/2023 12:26, Artur Weber wrote:
>>> On 16/04/2023 12:16, Artur Weber wrote:
>>>> This patches re-introduces the Exynos4212 platform and adds support
>>>> for the Samsung Galaxy Tab 3 8.0 series of tablets that uses it:
>>>>
>>>> - Samsung Galaxy Tab 3 8.0 WiFi (SM-T310/lt01wifi)
>>>> - Samsung Galaxy Tab 3 8.0 3G (SM-T311/lt013g)
>>>> - Samsung Galaxy Tab 3 8.0 LTE (SM-T315/lt01lte)
>>>>
>>>> What works:
>>>>
>>>> - Display and backlight
>>>> - Touchscreen (without touchkeys)
>>>> - GPIO buttons, hall sensor
>>>> - WiFi and Bluetooth
>>>> - USB, fuel gauge, charging (partial)
>>>> - Accelerometer and magnetometer
>>>> - WiFi model only: light sensor
>>>
>>> This patchset depends on "[PATCH 0/3] Add Samsung S6D7AA0 panel
>>> controller driver" for the display panel support for the Samsung Galaxy
>>> 3 8.0 boards.
>>
>> Why? DTS and ARM code cannot depend on driver changes. Please rework
>> your patchsets to remove any of such dependencies.
>
> Ah, that makes sense. I'll re-send the patchset in a second with the
> panel node removed.
I am sorry, I don't understand. Why would you remove anything from DTS?
Are bindings NAKed?
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH 00/12] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards
2023-04-16 10:53 ` Krzysztof Kozlowski
@ 2023-04-16 12:37 ` Artur Weber
2023-04-16 12:42 ` Krzysztof Kozlowski
0 siblings, 1 reply; 19+ messages in thread
From: Artur Weber @ 2023-04-16 12:37 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Alim Akhtar, Rob Herring, Sylwester Nawrocki, Tomasz Figa,
Chanwoo Choi, Michael Turquette, Stephen Boyd, Arnd Bergmann,
Olof Johansson, soc, Russell King, Daniel Lezcano, Kukjin Kim,
Mauro Carvalho Chehab, Vinod Koul, Kishon Vijay Abraham I,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel,
linux-clk, linux-pm, linux-media, linux-phy,
~postmarketos/upstreaming
On 16/04/2023 12:53, Krzysztof Kozlowski wrote:
> On 16/04/2023 12:49, Artur Weber wrote:
>> On 16/04/2023 12:34, Krzysztof Kozlowski wrote:
>>> On 16/04/2023 12:26, Artur Weber wrote:
>>>> On 16/04/2023 12:16, Artur Weber wrote:
>>>>> This patches re-introduces the Exynos4212 platform and adds support
>>>>> for the Samsung Galaxy Tab 3 8.0 series of tablets that uses it:
>>>>>
>>>>> - Samsung Galaxy Tab 3 8.0 WiFi (SM-T310/lt01wifi)
>>>>> - Samsung Galaxy Tab 3 8.0 3G (SM-T311/lt013g)
>>>>> - Samsung Galaxy Tab 3 8.0 LTE (SM-T315/lt01lte)
>>>>>
>>>>> What works:
>>>>>
>>>>> - Display and backlight
>>>>> - Touchscreen (without touchkeys)
>>>>> - GPIO buttons, hall sensor
>>>>> - WiFi and Bluetooth
>>>>> - USB, fuel gauge, charging (partial)
>>>>> - Accelerometer and magnetometer
>>>>> - WiFi model only: light sensor
>>>>
>>>> This patchset depends on "[PATCH 0/3] Add Samsung S6D7AA0 panel
>>>> controller driver" for the display panel support for the Samsung Galaxy
>>>> 3 8.0 boards.
>>>
>>> Why? DTS and ARM code cannot depend on driver changes. Please rework
>>> your patchsets to remove any of such dependencies.
>>
>> Ah, that makes sense. I'll re-send the patchset in a second with the
>> panel node removed.
>
> I am sorry, I don't understand. Why would you remove anything from DTS?
> Are bindings NAKed?
The dependency display panel patchset introduces the panel and its
bindings, which in turn are included in the Tab3 DTSI. It was submitted
at roughly the same time as this series, and hasn't been fully reviewed
or merged as of writing. (I have seen your comments on that patchset,
and I will be addressing them shortly.) So the bindings haven't been
explicitly ACKed yet (assuming you mean the Acked-by reply).
In response to:
> Please rework your patchsets to remove any of such dependencies.
I suggested that I could remove the panel node from the DTSI for the
time being. The intent was to submit it in a separate patch later, once
the display is reviewed/merged, and thus actually available in the
kernel; this way, the two patches could be reviewed and merged separately.
I could instead wait for the display patchset to get reviewed/merged
first, then resubmit this series, if that's preferable.
I apologize for the confusion.
Best regards,
Artur Weber
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH 00/12] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards
2023-04-16 12:37 ` Artur Weber
@ 2023-04-16 12:42 ` Krzysztof Kozlowski
0 siblings, 0 replies; 19+ messages in thread
From: Krzysztof Kozlowski @ 2023-04-16 12:42 UTC (permalink / raw)
To: Artur Weber
Cc: Alim Akhtar, Rob Herring, Sylwester Nawrocki, Tomasz Figa,
Chanwoo Choi, Michael Turquette, Stephen Boyd, Arnd Bergmann,
Olof Johansson, soc, Russell King, Daniel Lezcano, Kukjin Kim,
Mauro Carvalho Chehab, Vinod Koul, Kishon Vijay Abraham I,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel,
linux-clk, linux-pm, linux-media, linux-phy,
~postmarketos/upstreaming
On 16/04/2023 14:37, Artur Weber wrote:
> On 16/04/2023 12:53, Krzysztof Kozlowski wrote:
>> On 16/04/2023 12:49, Artur Weber wrote:
>>> On 16/04/2023 12:34, Krzysztof Kozlowski wrote:
>>>> On 16/04/2023 12:26, Artur Weber wrote:
>>>>> On 16/04/2023 12:16, Artur Weber wrote:
>>>>>> This patches re-introduces the Exynos4212 platform and adds support
>>>>>> for the Samsung Galaxy Tab 3 8.0 series of tablets that uses it:
>>>>>>
>>>>>> - Samsung Galaxy Tab 3 8.0 WiFi (SM-T310/lt01wifi)
>>>>>> - Samsung Galaxy Tab 3 8.0 3G (SM-T311/lt013g)
>>>>>> - Samsung Galaxy Tab 3 8.0 LTE (SM-T315/lt01lte)
>>>>>>
>>>>>> What works:
>>>>>>
>>>>>> - Display and backlight
>>>>>> - Touchscreen (without touchkeys)
>>>>>> - GPIO buttons, hall sensor
>>>>>> - WiFi and Bluetooth
>>>>>> - USB, fuel gauge, charging (partial)
>>>>>> - Accelerometer and magnetometer
>>>>>> - WiFi model only: light sensor
>>>>>
>>>>> This patchset depends on "[PATCH 0/3] Add Samsung S6D7AA0 panel
>>>>> controller driver" for the display panel support for the Samsung Galaxy
>>>>> 3 8.0 boards.
>>>>
>>>> Why? DTS and ARM code cannot depend on driver changes. Please rework
>>>> your patchsets to remove any of such dependencies.
>>>
>>> Ah, that makes sense. I'll re-send the patchset in a second with the
>>> panel node removed.
>>
>> I am sorry, I don't understand. Why would you remove anything from DTS?
>> Are bindings NAKed?
>
> The dependency display panel patchset introduces the panel and its
> bindings, which in turn are included in the Tab3 DTSI. It was submitted
> at roughly the same time as this series, and hasn't been fully reviewed
> or merged as of writing. (I have seen your comments on that patchset,
> and I will be addressing them shortly.) So the bindings haven't been
> explicitly ACKed yet (assuming you mean the Acked-by reply).
So there is no dependency. DTS is (and must be) independent of driver.
You need to mention in the patch (under --- ) or cover letter that it
uses new bindings which are documented under the given link.
>
> In response to:
>
> > Please rework your patchsets to remove any of such dependencies.
>
> I suggested that I could remove the panel node from the DTSI for the
> time being. The intent was to submit it in a separate patch later, once
> the display is reviewed/merged, and thus actually available in the
> kernel; this way, the two patches could be reviewed and merged separately.
No need, there is no dependency. Just remove such remarks from cover letter.
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 19+ messages in thread