From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Rui Miguel Silva <rmfrfs@gmail.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
NXP Linux Team <linux-imx@nxp.com>,
linux-media@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 2/4] media: imx: imx7-media-csi: Remove interlave fields
Date: Tue, 18 Apr 2023 18:43:51 +0300 [thread overview]
Message-ID: <20230418154351.GH30837@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20230418122041.1318862-3-alexander.stein@ew.tq-group.com>
Hi Alexander,
Thank you for the patch.
In the subject line, "interlave" is misspelled. I'd write "Remove
incorrect interlacing support"
On Tue, Apr 18, 2023 at 02:20:39PM +0200, Alexander Stein wrote:
> Interlaced mode is currently not supported, so disable fields in try_fmt.
And here,
The driver doesn't currently support interlacing, but due to legacy
leftovers, it accepts values for the pixel format "field" field other
than V4L2_FIELD_NONE. Fix it by hardcoding V4L2_FIELD_NONE. Proper
interlacing support can be implemented later if desired.
With this,
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
I can apply those changes directly to my tree if you would prefer
avoiding a v4.
> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> ---
> Changes in v3:
> * Remove left-over interlace mode check
>
> drivers/media/platform/nxp/imx7-media-csi.c | 15 +--------------
> 1 file changed, 1 insertion(+), 14 deletions(-)
>
> diff --git a/drivers/media/platform/nxp/imx7-media-csi.c b/drivers/media/platform/nxp/imx7-media-csi.c
> index b149374b07ee1..1315f5743b76f 100644
> --- a/drivers/media/platform/nxp/imx7-media-csi.c
> +++ b/drivers/media/platform/nxp/imx7-media-csi.c
> @@ -1162,20 +1162,6 @@ __imx7_csi_video_try_fmt(struct v4l2_pix_format *pixfmt,
> cc = imx7_csi_find_pixel_format(pixfmt->pixelformat);
> }
>
> - /* Allow IDMAC interweave but enforce field order from source. */
> - if (V4L2_FIELD_IS_INTERLACED(pixfmt->field)) {
> - switch (pixfmt->field) {
> - case V4L2_FIELD_SEQ_TB:
> - pixfmt->field = V4L2_FIELD_INTERLACED_TB;
> - break;
> - case V4L2_FIELD_SEQ_BT:
> - pixfmt->field = V4L2_FIELD_INTERLACED_BT;
> - break;
> - default:
> - break;
> - }
> - }
> -
> /*
> * Round up width for minimum burst size.
> *
> @@ -1187,6 +1173,7 @@ __imx7_csi_video_try_fmt(struct v4l2_pix_format *pixfmt,
>
> pixfmt->bytesperline = pixfmt->width * cc->bpp / 8;
> pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
> + pixfmt->field = V4L2_FIELD_NONE;
>
> return cc;
> }
--
Regards,
Laurent Pinchart
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-04-18 15:44 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-18 12:20 [PATCH v3 0/4] Fix imx7-media-csi format settings Alexander Stein
2023-04-18 12:20 ` [PATCH v3 1/4] media: imx: imx7-media-csi: Get rid of superfluous call to imx7_csi_mbus_fmt_to_pix_fmt Alexander Stein
2023-04-18 15:35 ` Laurent Pinchart
2023-04-18 12:20 ` [PATCH v3 2/4] media: imx: imx7-media-csi: Remove interlave fields Alexander Stein
2023-04-18 15:43 ` Laurent Pinchart [this message]
2023-04-19 7:02 ` Alexander Stein
2023-04-18 12:20 ` [PATCH v3 3/4] media: imx: imx7-media-csi: Lift width constraints for 8bpp formats Alexander Stein
2023-04-18 15:59 ` Laurent Pinchart
2023-04-19 7:01 ` Alexander Stein
2023-04-18 12:20 ` [PATCH v3 4/4] media: imx: imx7-media-csi: Init default format with __imx7_csi_video_try_fmt() Alexander Stein
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230418154351.GH30837@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=alexander.stein@ew.tq-group.com \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=rmfrfs@gmail.com \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).