linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Lee Jones <lee@kernel.org>
To: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	William Breathitt Gray <william.gray@linaro.org>,
	Fabrice Gasnier <fabrice.gasnier@foss.st.com>,
	Olivier Moysan <olivier.moysan@foss.st.com>,
	Thierry Reding <thierry.reding@gmail.com>,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel@pengutronix.de,
	linux-iio@vger.kernel.org
Subject: Re: [PATCH] counter: stm32-timer-cnt: Reset TIM_TISEL and TIM_SMCR to their default value
Date: Thu, 20 Apr 2023 12:01:11 +0100	[thread overview]
Message-ID: <20230420110111.GM9904@google.com> (raw)
In-Reply-To: <20230412153709.3557323-1-u.kleine-koenig@pengutronix.de>

On Wed, 12 Apr 2023, Uwe Kleine-König wrote:

> The driver assumes that the input selection register (TIM_TISEL) is at
> its reset default value. Usually this is the case, but the bootloader
> might have modified it. Also reset the SMCR register while at it.
> 
> This bases on the effectively same patch submitted by Olivier Moysan for
> pwm-stm32.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> ---
> Hello,
> 
> note that the patch by Olivier Moysan[1] for pwm-stm32 is expected to
> appear in Thierry's tree soon. It added the definition of TIM_TISEL in
> the same way, so the two patches should merge just fine. Alternatively
> you can commit it to a tree that already has the pwm change (and then
> drop the change to include/linux/mfd/stm32-timers.h from this one).
> 
> Best regards
> Uwe
> 
> [1] https://lore.kernel.org/linux-pwm/20221213102707.1096345-1-olivier.moysan@foss.st.com
> 
>  drivers/counter/stm32-timer-cnt.c | 4 ++++

>  include/linux/mfd/stm32-timers.h  | 1 +

Acked-by: Lee Jones <lee@kernel.org>

>  2 files changed, 5 insertions(+)
> 
> diff --git a/drivers/counter/stm32-timer-cnt.c b/drivers/counter/stm32-timer-cnt.c
> index 9bf20a5d6bda..d001d77f17ac 100644
> --- a/drivers/counter/stm32-timer-cnt.c
> +++ b/drivers/counter/stm32-timer-cnt.c
> @@ -342,6 +342,10 @@ static int stm32_timer_cnt_probe(struct platform_device *pdev)
>  
>  	platform_set_drvdata(pdev, priv);
>  
> +	/* Reset input selector to its default input and disable slave mode */
> +	regmap_write(priv->regmap, TIM_TISEL, 0x0);
> +	regmap_write(priv->regmap, TIM_SMCR, 0x0);
> +
>  	/* Register Counter device */
>  	ret = devm_counter_add(dev, counter);
>  	if (ret < 0)
> diff --git a/include/linux/mfd/stm32-timers.h b/include/linux/mfd/stm32-timers.h
> index 5f5c43fd69dd..1b94325febb3 100644
> --- a/include/linux/mfd/stm32-timers.h
> +++ b/include/linux/mfd/stm32-timers.h
> @@ -31,6 +31,7 @@
>  #define TIM_BDTR	0x44	/* Break and Dead-Time Reg */
>  #define TIM_DCR		0x48	/* DMA control register    */
>  #define TIM_DMAR	0x4C	/* DMA register for transfer */
> +#define TIM_TISEL	0x68	/* Input Selection         */
>  
>  #define TIM_CR1_CEN	BIT(0)	/* Counter Enable	   */
>  #define TIM_CR1_DIR	BIT(4)  /* Counter Direction	   */
> 
> base-commit: fe15c26ee26efa11741a7b632e9f23b01aca4cc6
> -- 
> 2.39.2
> 

-- 
Lee Jones [李琼斯]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2023-04-20 11:02 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-12 15:37 [PATCH] counter: stm32-timer-cnt: Reset TIM_TISEL and TIM_SMCR to their default value Uwe Kleine-König
2023-04-13 15:49 ` Fabrice Gasnier
2023-04-20 11:01 ` Lee Jones [this message]
2023-04-21  9:24   ` Uwe Kleine-König

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230420110111.GM9904@google.com \
    --to=lee@kernel.org \
    --cc=alexandre.torgue@foss.st.com \
    --cc=fabrice.gasnier@foss.st.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=olivier.moysan@foss.st.com \
    --cc=thierry.reding@gmail.com \
    --cc=u.kleine-koenig@pengutronix.de \
    --cc=william.gray@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).