Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Vaishnav Achath <vaishnav.a@ti.com>
To: <nm@ti.com>, <kristo@kernel.org>, <vigneshr@ti.com>,
	<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<u-kumar1@ti.com>, <vaishnav.a@ti.com>
Subject: [PATCH 4/4] arm64: dts: ti: k3-j7200-som: Describe OSPI and Hyperflash partition info
Date: Wed, 3 May 2023 14:42:18 +0530	[thread overview]
Message-ID: <20230503091218.25899-5-vaishnav.a@ti.com> (raw)
In-Reply-To: <20230503091218.25899-1-vaishnav.a@ti.com>

Describe OSPI and Hyperflash partition information through device tree,
this helps to remove passing partition information through the mtdparts
commandline parameter which requires maintaining the partition
information in a string format. J7200 SoM has a S28 64 MiB OSPI flash
with sector size of 256 KiB thus the size of the smallest partition is
chosen as 256 KiB, the SoM also has a 64 MiB Hyperflash present on it,
the partition names and offsets are chosen according to the corresponding
name and offsets in bootloader.

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 72 +++++++++++++++++++++
 1 file changed, 72 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
index fa44ed4c17d5..198408fdb017 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
@@ -140,6 +140,37 @@
 	flash@0,0 {
 		compatible = "cypress,hyperflash", "cfi-flash";
 		reg = <0x00 0x00 0x4000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "hbmc.tiboot3";
+				reg = <0x0 0x100000>;
+			};
+
+			partition@100000 {
+				label = "hbmc.tispl";
+				reg = <0x100000 0x200000>;
+			};
+
+			partition@300000 {
+				label = "hbmc.u-boot";
+				reg = <0x300000 0x400000>;
+			};
+
+			partition@700000 {
+				label = "hbmc.env";
+				reg = <0x700000 0x40000>;
+			};
+
+			partition@800000 {
+				label = "hbmc.rootfs";
+				reg = <0x800000 0x3800000>;
+			};
+		};
 	};
 };
 
@@ -229,5 +260,46 @@
 		cdns,tchsh-ns = <60>;
 		cdns,tslch-ns = <60>;
 		cdns,read-delay = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x0 0x100000>;
+			};
+
+			partition@100000 {
+				label = "ospi.tispl";
+				reg = <0x100000 0x200000>;
+			};
+
+			partition@300000 {
+				label = "ospi.u-boot";
+				reg = <0x300000 0x400000>;
+			};
+
+			partition@700000 {
+				label = "ospi.env";
+				reg = <0x700000 0x40000>;
+			};
+
+			partition@740000 {
+				label = "ospi.env.backup";
+				reg = <0x740000 0x40000>;
+			};
+
+			partition@800000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fc0000 {
+				label = "ospi.phypattern";
+				reg = <0x3fc0000 0x40000>;
+			};
+		};
 	};
 };
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2023-05-03  9:13 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-03  9:12 [PATCH 0/4] arm64: dts: ti: Describe flash partitions for J7 platforms Vaishnav Achath
2023-05-03  9:12 ` [PATCH 1/4] arm64: dts: ti: k3-j721e-som: Describe OSPI flash partition info Vaishnav Achath
2023-05-03  9:12 ` [PATCH 2/4] arm64: dts: ti: k3-j721e-som: Describe QSPI " Vaishnav Achath
2023-05-03  9:12 ` [PATCH 3/4] arm64: dts: ti: k3-j721e-sk: Describe OSPI " Vaishnav Achath
2023-05-03  9:12 ` Vaishnav Achath [this message]
2023-05-03 11:51 ` [PATCH 0/4] arm64: dts: ti: Describe flash partitions for J7 platforms Nishanth Menon
2023-05-04  5:39   ` Vaishnav Achath

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230503091218.25899-5-vaishnav.a@ti.com \
    --to=vaishnav.a@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=u-kumar1@ti.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox