public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Frank Li <Frank.Li@nxp.com>
To: vkoul@kernel.org, kishon@kernel.org, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, shawnguo@kernel.org,
	s.hauer@pengutronix.de, kernel@pengutronix.de,
	linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, imx@lists.linux.dev,
	fushi.peng@nxp.com
Subject: [PATCH 1/2] phy: cadence: salvo: Add usb2-disconnect-threshold-microvolt property
Date: Fri,  5 May 2023 14:52:46 -0400	[thread overview]
Message-ID: <20230505185247.1854677-1-Frank.Li@nxp.com> (raw)

Add usb2-disconnect-threshold-microvolt property to address fake USB
disconnection issue during enumeration or suspend state for difference
platform.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8x-mek.dtsi |  1 +
 drivers/phy/cadence/phy-cadence-salvo.c      | 30 +++++++++++++++++++-
 2 files changed, 30 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8x-mek.dtsi b/arch/arm64/boot/dts/freescale/imx8x-mek.dtsi
index 2f8fe59fc131..6a396844c02d 100644
--- a/arch/arm64/boot/dts/freescale/imx8x-mek.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8x-mek.dtsi
@@ -1051,6 +1051,7 @@ &usbotg1 {
 
 &usb3_phy {
 	status = "okay";
+	usb2-disconnect-threshold-microvolt = <645>;
 };
 
 &usbotg3 {
diff --git a/drivers/phy/cadence/phy-cadence-salvo.c b/drivers/phy/cadence/phy-cadence-salvo.c
index 23be27a747a9..06e705dbbc3c 100644
--- a/drivers/phy/cadence/phy-cadence-salvo.c
+++ b/drivers/phy/cadence/phy-cadence-salvo.c
@@ -5,7 +5,7 @@
  *
  * Copyright (c) 2019-2020 NXP
  */
-
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/module.h>
@@ -91,9 +91,19 @@
 
 /* USB2 PHY register definition */
 #define UTMI_REG15				0xaf
+#define UTMI_AFE_RX_REG0			0x0d
 #define UTMI_AFE_RX_REG5			0x12
 #define UTMI_AFE_BC_REG4			0x29
 
+/* Align UTMI_AFE_RX_REG0 bit[7:6] define */
+enum usb2_disconn_threshold {
+	USB2_DISCONN_THRESHOLD_575 = 0x0,
+	USB2_DISCONN_THRESHOLD_610 = 0x1,
+	USB2_DISCONN_THRESHOLD_645 = 0x3,
+};
+
+#define RX_USB2_DISCONN_MASK			GENMASK(7, 6)
+
 /* TB_ADDR_TX_RCVDETSC_CTRL */
 #define RXDET_IN_P3_32KHZ			BIT(0)
 /*
@@ -125,6 +135,7 @@ struct cdns_salvo_phy {
 	struct clk *clk;
 	void __iomem *base;
 	struct cdns_salvo_data *data;
+	enum usb2_disconn_threshold usb2_disconn;
 };
 
 static const struct of_device_id cdns_salvo_phy_of_match[];
@@ -261,6 +272,12 @@ static int cdns_salvo_phy_init(struct phy *phy)
 
 	cdns_salvo_write(salvo_phy, USB2_PHY_OFFSET, UTMI_AFE_RX_REG5,
 			 0x5);
+
+	value = cdns_salvo_read(salvo_phy, USB2_PHY_OFFSET, UTMI_AFE_RX_REG0);
+	value &= ~RX_USB2_DISCONN_MASK;
+	value = FIELD_PREP(RX_USB2_DISCONN_MASK, salvo_phy->usb2_disconn);
+	cdns_salvo_write(salvo_phy, USB2_PHY_OFFSET, UTMI_AFE_RX_REG0, value);
+
 	udelay(10);
 
 	clk_disable_unprepare(salvo_phy->clk);
@@ -315,6 +332,7 @@ static int cdns_salvo_phy_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct cdns_salvo_phy *salvo_phy;
 	struct cdns_salvo_data *data;
+	u32 val;
 
 	data = (struct cdns_salvo_data *)of_device_get_match_data(dev);
 	salvo_phy = devm_kzalloc(dev, sizeof(*salvo_phy), GFP_KERNEL);
@@ -326,6 +344,16 @@ static int cdns_salvo_phy_probe(struct platform_device *pdev)
 	if (IS_ERR(salvo_phy->clk))
 		return PTR_ERR(salvo_phy->clk);
 
+	if (of_property_read_u32(dev->of_node, "usb2-disconnect-threshold-microvolt", &val))
+		val = 575;
+
+	if (val < 610)
+		salvo_phy->usb2_disconn = USB2_DISCONN_THRESHOLD_575;
+	else if (val < 645)
+		salvo_phy->usb2_disconn = USB2_DISCONN_THRESHOLD_610;
+	else
+		salvo_phy->usb2_disconn = USB2_DISCONN_THRESHOLD_645;
+
 	salvo_phy->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(salvo_phy->base))
 		return PTR_ERR(salvo_phy->base);
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2023-05-05 18:54 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-05 18:52 Frank Li [this message]
2023-05-05 18:52 ` [PATCH 2/2] doc: dt-binding: cdns-salvo-phy: add property usb2-disconnect-threshold-microvolt Frank Li
2023-05-05 19:14   ` Rob Herring
2023-05-06 10:30   ` Krzysztof Kozlowski
2023-05-06 10:29 ` [PATCH 1/2] phy: cadence: salvo: Add usb2-disconnect-threshold-microvolt property Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230505185247.1854677-1-Frank.Li@nxp.com \
    --to=frank.li@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fushi.peng@nxp.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=kishon@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox