From: Jing Zhang <jingzhangos@google.com>
To: KVM <kvm@vger.kernel.org>, KVMARM <kvmarm@lists.linux.dev>,
ARMLinux <linux-arm-kernel@lists.infradead.org>,
Marc Zyngier <maz@kernel.org>, Oliver Upton <oupton@google.com>
Cc: Will Deacon <will@kernel.org>,
Paolo Bonzini <pbonzini@redhat.com>,
James Morse <james.morse@arm.com>,
Alexandru Elisei <alexandru.elisei@arm.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Fuad Tabba <tabba@google.com>,
Reiji Watanabe <reijiw@google.com>,
Raghavendra Rao Ananta <rananta@google.com>,
Jing Zhang <jingzhangos@google.com>
Subject: [PATCH v9 2/5] KVM: arm64: Use per guest ID register for ID_AA64PFR0_EL1.[CSV2|CSV3]
Date: Wed, 17 May 2023 06:10:11 +0000 [thread overview]
Message-ID: <20230517061015.1915934-3-jingzhangos@google.com> (raw)
In-Reply-To: <20230517061015.1915934-1-jingzhangos@google.com>
With per guest ID registers, ID_AA64PFR0_EL1.[CSV2|CSV3] settings from
userspace can be stored in its corresponding ID register.
The setting of CSV bits for protected VMs are removed according to the
discussion from Fuad below:
https://lore.kernel.org/all/CA+EHjTwXA9TprX4jeG+-D+c8v9XG+oFdU1o6TSkvVye145_OvA@mail.gmail.com
Besides the removal of CSV bits setting for protected VMs, No other
functional change intended.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
---
arch/arm64/include/asm/kvm_host.h | 2 --
arch/arm64/kvm/arm.c | 17 ----------
arch/arm64/kvm/sys_regs.c | 55 +++++++++++++++++++++++++------
3 files changed, 45 insertions(+), 29 deletions(-)
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 949a4a782844..07f0e091ae48 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -257,8 +257,6 @@ struct kvm_arch {
cpumask_var_t supported_cpus;
- u8 pfr0_csv2;
- u8 pfr0_csv3;
struct {
u8 imp:4;
u8 unimp:4;
diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
index 774656a0718d..5114521ace60 100644
--- a/arch/arm64/kvm/arm.c
+++ b/arch/arm64/kvm/arm.c
@@ -102,22 +102,6 @@ static int kvm_arm_default_max_vcpus(void)
return vgic_present ? kvm_vgic_get_max_vcpus() : KVM_MAX_VCPUS;
}
-static void set_default_spectre(struct kvm *kvm)
-{
- /*
- * The default is to expose CSV2 == 1 if the HW isn't affected.
- * Although this is a per-CPU feature, we make it global because
- * asymmetric systems are just a nuisance.
- *
- * Userspace can override this as long as it doesn't promise
- * the impossible.
- */
- if (arm64_get_spectre_v2_state() == SPECTRE_UNAFFECTED)
- kvm->arch.pfr0_csv2 = 1;
- if (arm64_get_meltdown_state() == SPECTRE_UNAFFECTED)
- kvm->arch.pfr0_csv3 = 1;
-}
-
/**
* kvm_arch_init_vm - initializes a VM data structure
* @kvm: pointer to the KVM struct
@@ -161,7 +145,6 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
/* The maximum number of VCPUs is limited by the host's GIC model */
kvm->max_vcpus = kvm_arm_default_max_vcpus();
- set_default_spectre(kvm);
kvm_arm_init_hypercalls(kvm);
kvm_arm_init_id_regs(kvm);
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index d2ee3a1c7f03..3c52b136ade3 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -1218,10 +1218,6 @@ static u64 kvm_arm_read_id_reg(const struct kvm_vcpu *vcpu, u32 id)
if (!vcpu_has_sve(vcpu))
val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_SVE);
val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_AMU);
- val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV2);
- val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV2), (u64)vcpu->kvm->arch.pfr0_csv2);
- val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV3);
- val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV3), (u64)vcpu->kvm->arch.pfr0_csv3);
if (kvm_vgic_global_state.type == VGIC_V3) {
val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_GIC);
val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_GIC), 1);
@@ -1359,7 +1355,10 @@ static int set_id_aa64pfr0_el1(struct kvm_vcpu *vcpu,
const struct sys_reg_desc *rd,
u64 val)
{
+ struct kvm_arch *arch = &vcpu->kvm->arch;
+ u64 sval = val;
u8 csv2, csv3;
+ int ret = 0;
/*
* Allow AA64PFR0_EL1.CSV2 to be set from userspace as long as
@@ -1377,17 +1376,26 @@ static int set_id_aa64pfr0_el1(struct kvm_vcpu *vcpu,
(csv3 && arm64_get_meltdown_state() != SPECTRE_UNAFFECTED))
return -EINVAL;
+ mutex_lock(&arch->config_lock);
/* We can only differ with CSV[23], and anything else is an error */
val ^= read_id_reg(vcpu, rd);
val &= ~(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV2) |
ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV3));
- if (val)
- return -EINVAL;
-
- vcpu->kvm->arch.pfr0_csv2 = csv2;
- vcpu->kvm->arch.pfr0_csv3 = csv3;
+ if (val) {
+ ret = -EINVAL;
+ goto out;
+ }
- return 0;
+ /* Only allow userspace to change the idregs before VM running */
+ if (test_bit(KVM_ARCH_FLAG_HAS_RAN_ONCE, &vcpu->kvm->arch.flags)) {
+ if (sval != read_id_reg(vcpu, rd))
+ ret = -EBUSY;
+ } else {
+ IDREG(vcpu->kvm, reg_to_encoding(rd)) = sval;
+ }
+out:
+ mutex_unlock(&arch->config_lock);
+ return ret;
}
static int set_id_aa64dfr0_el1(struct kvm_vcpu *vcpu,
@@ -1479,7 +1487,12 @@ static int set_id_dfr0_el1(struct kvm_vcpu *vcpu,
static int get_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
u64 *val)
{
+ struct kvm_arch *arch = &vcpu->kvm->arch;
+
+ mutex_lock(&arch->config_lock);
*val = read_id_reg(vcpu, rd);
+ mutex_unlock(&arch->config_lock);
+
return 0;
}
@@ -3364,6 +3377,7 @@ void kvm_arm_init_id_regs(struct kvm *kvm)
{
const struct sys_reg_desc *idreg;
struct sys_reg_params params;
+ u64 val;
u32 id;
/* Find the first idreg (SYS_ID_PFR0_EL1) in sys_reg_descs. */
@@ -3386,6 +3400,27 @@ void kvm_arm_init_id_regs(struct kvm *kvm)
idreg++;
id = reg_to_encoding(idreg);
}
+
+ /*
+ * The default is to expose CSV2 == 1 if the HW isn't affected.
+ * Although this is a per-CPU feature, we make it global because
+ * asymmetric systems are just a nuisance.
+ *
+ * Userspace can override this as long as it doesn't promise
+ * the impossible.
+ */
+ val = IDREG(kvm, SYS_ID_AA64PFR0_EL1);
+
+ if (arm64_get_spectre_v2_state() == SPECTRE_UNAFFECTED) {
+ val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV2);
+ val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV2), 1);
+ }
+ if (arm64_get_meltdown_state() == SPECTRE_UNAFFECTED) {
+ val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV3);
+ val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV3), 1);
+ }
+
+ IDREG(kvm, SYS_ID_AA64PFR0_EL1) = val;
}
int __init kvm_sys_reg_table_init(void)
--
2.40.1.606.ga4b1b128d6-goog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-05-17 6:10 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-17 6:10 [PATCH v9 0/5] Support writable CPU ID registers from userspace Jing Zhang
2023-05-17 6:10 ` [PATCH v9 1/5] KVM: arm64: Save ID registers' sanitized value per guest Jing Zhang
2023-05-18 7:17 ` Shameerali Kolothum Thodi
2023-05-18 19:48 ` Jing Zhang
2023-05-19 8:08 ` Shameerali Kolothum Thodi
2023-05-19 17:44 ` Jing Zhang
2023-05-19 22:16 ` Reiji Watanabe
2023-05-22 17:27 ` Jing Zhang
2023-05-17 6:10 ` Jing Zhang [this message]
2023-05-19 23:52 ` [PATCH v9 2/5] KVM: arm64: Use per guest ID register for ID_AA64PFR0_EL1.[CSV2|CSV3] Reiji Watanabe
2023-05-22 17:23 ` Jing Zhang
2023-05-17 6:10 ` [PATCH v9 3/5] KVM: arm64: Use per guest ID register for ID_AA64DFR0_EL1.PMUVer Jing Zhang
2023-05-17 6:10 ` [PATCH v9 4/5] KVM: arm64: Reuse fields of sys_reg_desc for idreg Jing Zhang
2023-05-17 6:10 ` [PATCH v9 5/5] KVM: arm64: Refactor writings for PMUVer/CSV2/CSV3 Jing Zhang
2023-06-02 1:03 ` Suraj Jitindar Singh
2023-06-02 8:15 ` Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230517061015.1915934-3-jingzhangos@google.com \
--to=jingzhangos@google.com \
--cc=alexandru.elisei@arm.com \
--cc=james.morse@arm.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.linux.dev \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=maz@kernel.org \
--cc=oupton@google.com \
--cc=pbonzini@redhat.com \
--cc=rananta@google.com \
--cc=reijiw@google.com \
--cc=suzuki.poulose@arm.com \
--cc=tabba@google.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).