From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
<conor.dooley@microchip.com>, <nicolas.ferre@microchip.com>,
<alexandre.belloni@bootlin.com>, <sre@kernel.org>
Cc: <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-pm@vger.kernel.org>,
Claudiu Beznea <claudiu.beznea@microchip.com>
Subject: [PATCH 2/4] dt-bindings: power: reset: atmel,at91sam9260-shdwc: convert to yaml
Date: Tue, 23 May 2023 09:15:10 +0300 [thread overview]
Message-ID: <20230523061512.195271-3-claudiu.beznea@microchip.com> (raw)
In-Reply-To: <20230523061512.195271-1-claudiu.beznea@microchip.com>
Convert Atmel shutdown controller to YAML.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
.../devicetree/bindings/arm/atmel-sysregs.txt | 31 -------
.../power/reset/atmel,at91sam9260-shdwc.yaml | 81 +++++++++++++++++++
2 files changed, 81 insertions(+), 31 deletions(-)
create mode 100644 Documentation/devicetree/bindings/power/reset/atmel,at91sam9260-shdwc.yaml
diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index ab1b352344ae..e6b2fb291b45 100644
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -52,37 +52,6 @@ Example:
reg = <0xe3804000 0x1000>;
};
-SHDWC Shutdown Controller
-
-required properties:
-- compatible: Should be "atmel,<chip>-shdwc".
- <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
-- reg: Should contain registers location and length
-- clocks: phandle to input clock.
-
-optional properties:
-- atmel,wakeup-mode: String, operation mode of the wakeup mode.
- Supported values are: "none", "high", "low", "any".
-- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf).
-
-optional at91sam9260 properties:
-- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
-
-optional at91sam9rl properties:
-- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
-- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
-
-optional at91sam9x5 properties:
-- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
-
-Example:
-
- shdwc@fffffd10 {
- compatible = "atmel,at91sam9260-shdwc";
- reg = <0xfffffd10 0x10>;
- clocks = <&clk32k>;
- };
-
SHDWC SAMA5D2-Compatible Shutdown Controller
1) shdwc node
diff --git a/Documentation/devicetree/bindings/power/reset/atmel,at91sam9260-shdwc.yaml b/Documentation/devicetree/bindings/power/reset/atmel,at91sam9260-shdwc.yaml
new file mode 100644
index 000000000000..3b3162677db3
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/atmel,at91sam9260-shdwc.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/atmel,at91sam9260-shdwc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel SHDWC Shutdown Controller
+
+maintainers:
+ - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description: |
+ Atmel SHDWC shutdown controller controls the power supplies VDDIO and VDDCORE
+ and the wake-up detection on debounced input lines.
+
+properties:
+ compatible:
+ enum:
+ - atmel,at91sam9260-shdwc
+ - atmel,at91sam9rl-shdwc
+ - atmel,at91sam9x5-shdwc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ atmel,wakeup-mode:
+ description: operation mode of the wakeup mode
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ none, high, low, any ]
+
+ atmel,wakeup-counter:
+ description: counter on wake-up 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 ]
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - atmel,at91sam9260-shdwc
+ - atmel,at91sam9rl-shdwc
+ then:
+ properties:
+ atmel,wakeup-rtt-timer:
+ description: enable real-time timer wake-up
+ type: boolean
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - atmel,at91sam9rl-shdwc
+ - atmel,at91sam9x5-shdwc
+ then:
+ properties:
+ atmel,wakeup-rtc-timer:
+ description: enable real-time clock wake-up
+ type: boolean
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ shdwc: poweroff@fffffd10 {
+ compatible = "atmel,at91sam9260-shdwc";
+ reg = <0xfffffd10 0x10>;
+ clocks = <&clk32k>;
+ };
+
+...
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-05-23 6:16 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-23 6:15 [PATCH 0/4] dt-bindings: power: reset: at91: convert to YAML Claudiu Beznea
2023-05-23 6:15 ` [PATCH 1/4] ARM: dts: at91: use generic name for shutdown controller Claudiu Beznea
2023-05-23 6:15 ` Claudiu Beznea [this message]
2023-05-23 18:27 ` [PATCH 2/4] dt-bindings: power: reset: atmel,at91sam9260-shdwc: convert to yaml Conor Dooley
2023-05-24 8:12 ` Nicolas.Ferre
2023-05-23 6:15 ` [PATCH 3/4] dt-bindings: power: reset: atmel,sama5d2-shdwc: " Claudiu Beznea
2023-05-23 18:49 ` Conor Dooley
2023-05-23 6:15 ` [PATCH 4/4] MAINTAINERS: add documentation file for Microchip SAMA5D2 shutdown controller Claudiu Beznea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230523061512.195271-3-claudiu.beznea@microchip.com \
--to=claudiu.beznea@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=conor.dooley@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=robh+dt@kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox