public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Conor Dooley <conor@kernel.org>
To: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: devicetree@vger.kernel.org, alexandre.belloni@bootlin.com,
	linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
	conor+dt@kernel.org, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, sre@kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 3/4] dt-bindings: power: reset: atmel,sama5d2-shdwc: convert to yaml
Date: Wed, 24 May 2023 20:19:08 +0100	[thread overview]
Message-ID: <20230524-blizzard-hunting-4da815e634e2@spud> (raw)
In-Reply-To: <20230524123528.439082-4-claudiu.beznea@microchip.com>


[-- Attachment #1.1: Type: text/plain, Size: 6760 bytes --]

On Wed, May 24, 2023 at 03:35:27PM +0300, Claudiu Beznea wrote:
> Convert Atmel SAMA5D2 shutdown controller to YAML. SAMA7G5 SHDWC DT node
> (available in arch/arm/boot/dts/sama7g5.dtsi) has syscon along with its
> compatible. There is no usage of this syscon in the current code but it
> may be necessary in future as some registers of SHDWC are accessed in
> different drivers (at91-sama5d2_shdwc.c and arch/arm/mach-at91/pm.c).
> Thus update the YAML with it to make DT checkers happy.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>

Modulo the license thing that I mentioned on v1,
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

Thanks,
Conor.
> ---
>  .../devicetree/bindings/arm/atmel-sysregs.txt |  63 ----------
>  .../power/reset/atmel,sama5d2-shdwc.yaml      | 115 ++++++++++++++++++
>  2 files changed, 115 insertions(+), 63 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> index e6b2fb291b45..67a66bf74895 100644
> --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> @@ -52,69 +52,6 @@ Example:
>  		reg = <0xe3804000 0x1000>;
>  };
>  
> -SHDWC SAMA5D2-Compatible Shutdown Controller
> -
> -1) shdwc node
> -
> -required properties:
> -- compatible: should be "atmel,sama5d2-shdwc", "microchip,sam9x60-shdwc" or
> -  "microchip,sama7g5-shdwc"
> -- reg: should contain registers location and length
> -- clocks: phandle to input clock.
> -- #address-cells: should be one. The cell is the wake-up input index.
> -- #size-cells: should be zero.
> -
> -optional properties:
> -
> -- debounce-delay-us: minimum wake-up inputs debouncer period in
> -  microseconds. It's usually a board-related property.
> -- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
> -
> -optional microchip,sam9x60-shdwc or microchip,sama7g5-shdwc properties:
> -- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
> -
> -The node contains child nodes for each wake-up input that the platform uses.
> -
> -2) input nodes
> -
> -Wake-up input nodes are usually described in the "board" part of the Device
> -Tree. Note also that input 0 is linked to the wake-up pin and is frequently
> -used.
> -
> -Required properties:
> -- reg: should contain the wake-up input index [0 - 15].
> -
> -Optional properties:
> -- atmel,wakeup-active-high: boolean, the corresponding wake-up input described
> -  by the child, forces the wake-up of the core power supply on a high level.
> -  The default is to be active low.
> -
> -Example:
> -
> -On the SoC side:
> -	shdwc@f8048010 {
> -		compatible = "atmel,sama5d2-shdwc";
> -		reg = <0xf8048010 0x10>;
> -		clocks = <&clk32k>;
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -		atmel,wakeup-rtc-timer;
> -	};
> -
> -On the board side:
> -	shdwc@f8048010 {
> -		debounce-delay-us = <976>;
> -
> -		input@0 {
> -			reg = <0>;
> -		};
> -
> -		input@1 {
> -			reg = <1>;
> -			atmel,wakeup-active-high;
> -		};
> -	};
> -
>  Special Function Registers (SFR)
>  
>  Special Function Registers (SFR) manage specific aspects of the integrated
> diff --git a/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml b/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml
> new file mode 100644
> index 000000000000..31a16a354a3a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml
> @@ -0,0 +1,115 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/reset/atmel,sama5d2-shdwc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Atmel SAMA5D2 SHDWC Shutdown Controller
> +
> +maintainers:
> +  - Claudiu Beznea <claudiu.beznea@microchip.com>
> +
> +description:
> +  Atmel SHDWC shutdown controller controls the power supplies VDDIO and VDDCORE
> +  and the wake-up detection on debounced input lines.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - const: microchip,sama7g5-shdwc
> +          - const: syscon
> +      - items:
> +          enum:
> +            - atmel,sama5d2-shdwc
> +            - microchip,sam9x60-shdwc
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0
> +
> +  debounce-delay-us:
> +    description:
> +      Minimum wake-up inputs debouncer period in microseconds. It is usually a
> +      board-related property.
> +
> +  atmel,wakeup-rtc-timer:
> +    description: enable real-time clock wake-up
> +    type: boolean
> +
> +patternProperties:
> +  "^input@[0-15]$":
> +    description:
> +      Wake-up input nodes. These are usually described in the "board" part of
> +      the Device Tree. Note also that input 0 is linked to the wake-up pin and
> +      is frequently used.
> +    type: object
> +    properties:
> +      reg:
> +        description: contains the wake-up input index
> +        minimum: 0
> +        maximum: 15
> +
> +      atmel,wakeup-active-high:
> +        description:
> +          The corresponding wake-up input described by the child forces the
> +          wake-up of the core power supply on a high level. The default is to
> +          be active low.
> +        type: boolean
> +
> +    required:
> +      - reg
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - microchip,sam9x60-shdwc
> +              - microchip,sama7g5-shdwc
> +    then:
> +      properties:
> +        atmel,wakeup-rtt-timer:
> +          description: enable real-time timer wake-up
> +          type: boolean
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    shdwc: poweroff@f8048010 {
> +        compatible = "atmel,sama5d2-shdwc";
> +        reg = <0xf8048010 0x10>;
> +        clocks = <&clk32k>;
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        atmel,wakeup-rtc-timer;
> +        debounce-delay-us = <976>;
> +
> +        input@0 {
> +            reg = <0>;
> +        };
> +
> +        input@1 {
> +            reg = <1>;
> +            atmel,wakeup-active-high;
> +        };
> +    };
> +
> +...
> -- 
> 2.34.1
> 

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2023-05-24 19:19 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-24 12:35 [PATCH v2 0/4] dt-bindings: power: reset: at91: convert to YAML Claudiu Beznea
2023-05-24 12:35 ` [PATCH v2 1/4] ARM: dts: at91: use generic name for shutdown controller Claudiu Beznea
2023-05-24 12:35 ` [PATCH v2 2/4] dt-bindings: power: reset: atmel,at91sam9260-shdwc: convert to yaml Claudiu Beznea
2023-05-24 19:20   ` Conor Dooley
2023-06-02 14:56   ` Krzysztof Kozlowski
2023-05-24 12:35 ` [PATCH v2 3/4] dt-bindings: power: reset: atmel,sama5d2-shdwc: " Claudiu Beznea
2023-05-24 19:19   ` Conor Dooley [this message]
2023-06-07 20:43     ` Rob Herring
2023-06-07 20:48       ` Conor Dooley
2023-06-08 14:38         ` Rob Herring
2023-06-08 16:49           ` Conor Dooley
2023-06-09 10:09             ` Nicolas Ferre
2023-06-13 18:44               ` Conor Dooley
2023-07-10 17:12                 ` Conor Dooley
2023-06-02 14:53   ` Krzysztof Kozlowski
2023-05-24 12:35 ` [PATCH v2 4/4] MAINTAINERS: add documentation file for Microchip SAMA5D2 shutdown controller Claudiu Beznea
2023-05-24 13:05 ` [PATCH v2 0/4] dt-bindings: power: reset: at91: convert to YAML Nicolas Ferre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230524-blizzard-hunting-4da815e634e2@spud \
    --to=conor@kernel.org \
    --cc=alexandre.belloni@bootlin.com \
    --cc=claudiu.beznea@microchip.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sre@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox