From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: miquel.raynal@bootlin.com, sebastian.hesselbarth@gmail.com,
gregory.clement@bootlin.com, vadym.kochan@plvision.eu,
linux-kernel@vger.kernel.org, vigneshr@ti.com,
conor+dt@kernel.org, linux-arm-kernel@lists.infradead.org,
andrew@lunn.ch, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, linux-mtd@lists.infradead.org,
enachman@marvell.com, devicetree@vger.kernel.org, richard@nod.at
Subject: Re: [PATCH v6 1/2] dt-bindings: mtd: marvell-nand: Convert to YAML DT scheme
Date: Tue, 30 May 2023 14:26:25 +0200 [thread overview]
Message-ID: <20230530122625.7zu3ey5dnn6izeli@krzk-bin> (raw)
In-Reply-To: <20230530005337.3687938-2-chris.packham@alliedtelesis.co.nz>
On Tue, 30 May 2023 12:53:36 +1200, Chris Packham wrote:
> From: Vadym Kochan <vadym.kochan@plvision.eu>
>
> Switch the DT binding to a YAML schema to enable the DT validation.
>
> Dropped deprecated compatibles and properties described in txt file.
>
> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
>
> Notes:
> Changes in v6:
> - remove properties covered by nand-controller.yaml
> - add example using armada-8k compatible
>
> earlier changes:
>
> v5:
> 1) Get back "label" and "partitions" properties but without
> ref to the "partition.yaml" which was wrongly used.
>
> 2) Add "additionalProperties: false" for nand@ because all possible
> properties are described.
>
> v4:
> 1) Remove "label" and "partitions" properties
>
> 2) Use 2 clocks for A7K/8K platform which is a requirement
>
> v3:
> 1) Remove txt version from the MAINTAINERS list
>
> 2) Use enum for some of compatible strings
>
> 3) Drop:
> #address-cells
> #size-cells:
>
> as they are inherited from the nand-controller.yaml
>
> 4) Add restriction to use 2 clocks for A8K SoC
>
> 5) Dropped description for clock-names and extend it with
> minItems: 1
>
> 6) Drop description for "dmas"
>
> 7) Use "unevalautedProperties: false"
>
> 8) Drop quites from yaml refs.
>
> 9) Use 4-space indentation for the example section
>
> v2:
> 1) Fixed warning by yamllint with incorrect indentation for compatible list
>
> .../bindings/mtd/marvell,nand-controller.yaml | 190 ++++++++++++++++++
> .../devicetree/bindings/mtd/marvell-nand.txt | 126 ------------
> MAINTAINERS | 1 -
> 3 files changed, 190 insertions(+), 127 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
> delete mode 100644 Documentation/devicetree/bindings/mtd/marvell-nand.txt
>
Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.
Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.
Full log is available here: https://patchwork.ozlabs.org/patch/1787248
nand@720000: $nodename:0: 'nand@720000' does not match '^nand-controller(@.*)?'
arch/arm64/boot/dts/marvell/armada-7040-db.dtb
arch/arm64/boot/dts/marvell/armada-7040-mochabin.dtb
arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dtb
arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dtb
arch/arm64/boot/dts/marvell/armada-8040-db.dtb
arch/arm64/boot/dts/marvell/armada-8040-db.dtb
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtb
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtb
arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dtb
arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dtb
arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dtb
arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dtb
arch/arm64/boot/dts/marvell/cn9130-crb-A.dtb
arch/arm64/boot/dts/marvell/cn9130-crb-B.dtb
arch/arm64/boot/dts/marvell/cn9130-db-B.dtb
arch/arm64/boot/dts/marvell/cn9130-db.dtb
arch/arm64/boot/dts/marvell/cn9131-db-B.dtb
arch/arm64/boot/dts/marvell/cn9131-db-B.dtb
arch/arm64/boot/dts/marvell/cn9131-db.dtb
arch/arm64/boot/dts/marvell/cn9131-db.dtb
arch/arm64/boot/dts/marvell/cn9132-db-B.dtb
arch/arm64/boot/dts/marvell/cn9132-db-B.dtb
arch/arm64/boot/dts/marvell/cn9132-db-B.dtb
arch/arm64/boot/dts/marvell/cn9132-db.dtb
arch/arm64/boot/dts/marvell/cn9132-db.dtb
arch/arm64/boot/dts/marvell/cn9132-db.dtb
nand@720000: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected)
arch/arm64/boot/dts/marvell/cn9130-db-B.dtb
arch/arm64/boot/dts/marvell/cn9131-db-B.dtb
arch/arm64/boot/dts/marvell/cn9132-db-B.dtb
nand-controller@43100000: clock-names: ['core'] is too short
arch/arm/boot/dts/pxa300-raumfeld-connector.dtb
arch/arm/boot/dts/pxa300-raumfeld-controller.dtb
arch/arm/boot/dts/pxa300-raumfeld-speaker-l.dtb
arch/arm/boot/dts/pxa300-raumfeld-speaker-m.dtb
arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dtb
arch/arm/boot/dts/pxa300-raumfeld-speaker-s.dtb
nand-controller@43100000: dma-names:0: 'rxtx' was expected
arch/arm/boot/dts/pxa300-raumfeld-connector.dtb
arch/arm/boot/dts/pxa300-raumfeld-controller.dtb
arch/arm/boot/dts/pxa300-raumfeld-speaker-l.dtb
arch/arm/boot/dts/pxa300-raumfeld-speaker-m.dtb
arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dtb
arch/arm/boot/dts/pxa300-raumfeld-speaker-s.dtb
nand-controller@43100000: Unevaluated properties are not allowed ('dma-names' was unexpected)
arch/arm/boot/dts/pxa300-raumfeld-connector.dtb
arch/arm/boot/dts/pxa300-raumfeld-controller.dtb
arch/arm/boot/dts/pxa300-raumfeld-speaker-l.dtb
arch/arm/boot/dts/pxa300-raumfeld-speaker-m.dtb
arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dtb
arch/arm/boot/dts/pxa300-raumfeld-speaker-s.dtb
nand-controller@d0000: nand@0:partitions: Unevaluated properties are not allowed ('partition@errlog', 'partition@nand-bbt', 'partition@user' were unexpected)
arch/arm/boot/dts/armada-385-atl-x530.dtb
nand-controller@d0000: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected)
arch/arm/boot/dts/armada-385-atl-x530.dtb
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-05-30 12:26 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-30 0:53 [PATCH v6 0/2] dt-bindings: mtd: marvell-nand: Add YAML scheme Chris Packham
2023-05-30 0:53 ` [PATCH v6 1/2] dt-bindings: mtd: marvell-nand: Convert to YAML DT scheme Chris Packham
2023-05-30 12:24 ` Krzysztof Kozlowski
2023-05-30 13:04 ` Miquel Raynal
2023-05-30 21:57 ` Chris Packham
2023-05-30 23:20 ` Chris Packham
2023-05-31 7:00 ` Krzysztof Kozlowski
2023-05-30 12:26 ` Krzysztof Kozlowski [this message]
2023-05-30 20:59 ` Chris Packham
2023-05-31 7:01 ` Krzysztof Kozlowski
2023-05-30 0:53 ` [PATCH v6 2/2] arm64: dts: marvell: cp11x: Fix nand_controller node name according to YAML Chris Packham
2023-06-16 11:45 ` [PATCH v6 0/2] dt-bindings: mtd: marvell-nand: Add YAML scheme Gregory CLEMENT
2023-06-16 11:58 ` Gregory CLEMENT
2023-06-18 21:12 ` Chris Packham
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230530122625.7zu3ey5dnn6izeli@krzk-bin \
--to=krzysztof.kozlowski@linaro.org \
--cc=andrew@lunn.ch \
--cc=chris.packham@alliedtelesis.co.nz \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=enachman@marvell.com \
--cc=gregory.clement@bootlin.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=vadym.kochan@plvision.eu \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox