From: Shawn Guo <shawnguo@kernel.org>
To: soc@kernel.org, arm@kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>,
Fabio Estevam <festevam@gmail.com>,
Stefan Agner <stefan@agner.ch>, Li Yang <leoyang.li@nxp.com>,
kernel@pengutronix.de, linux-imx@nxp.com,
linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL 3/4] i.MX arm64 device tree for 6.5
Date: Sat, 10 Jun 2023 15:25:29 +0800 [thread overview]
Message-ID: <20230610072530.418847-3-shawnguo@kernel.org> (raw)
In-Reply-To: <20230610072530.418847-1-shawnguo@kernel.org>
The following changes since commit ac9a78681b921877518763ba0e89202254349d1b:
Linux 6.4-rc1 (2023-05-07 13:34:35 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-6.5
for you to fetch changes up to 8e2facfe904a20e306536aeadd737dfaeab5cb38:
arm64: dts: imx8mq: Pass address-cells/size-cells to mipi_dsi (2023-06-09 22:34:35 +0800)
----------------------------------------------------------------
i.MX arm64 device tree for 6.5:
- New board support: i.MX8MM based Emtop SoM & Baseboard, NXP i.MX8MM EVKB
board, i.MX8MP based Gateworks Venice gw7905-2x device.
- A series from Adam Ford to add Camera and Audio support for i.MX8M
based Beacon boards.
- Add Audio output support for i.MX8MP TQMa8MPxL/MBa8MPxL board.
- Add HDMI and display support for imx8mm-evk and imx8mm-phg board.
- Add coresight trace devices support for i.MX8MP SoC.
- A couple of changes from Krzysztof Kozlowski to add missing cache
properties.
- A couple of changes from Laurent Pinchart to add CSIS and ISI devices
for i.MX8MP SoC.
- A series from Marek Vasut to add more devices for i.MX8MP, and enable
SAI audio on i.MX8MP DHCOM PDK2 and PDK3.
- Correct GSC vdd_bat data size for Gateworks Venice devices.
- Add more device support for i.MX93, Watchdog, OCOTP, idle states, DDR
performance monitor, etc.
- Small and random clean-ups and device node additions.
----------------------------------------------------------------
Adam Ford (4):
arm64: dts: imx8mn: Add CSI and ISI Nodes
arm64: dts: imx8mn-beacon: Add support for OV5640 Camera
arm64: dts: imx8mp-beacon-kit: Enable WM8962 Audio CODEC
arm64: dts: imx8mn-beacon: Migrate sound card to simple-audio-card
Alexander Stein (7):
arm64: dts: imx8mp: move noc node to correct position
arm64: dts: imx8mp: Add analog audio output on i.MX8MP TQMa8MPxL/MBa8MPxL
arm64: dts: tqma8mqml: Add vcc supply to i2c eeproms
arm64: dts: imx8mq: Fix lcdif compatible
arm64: dts: imx8mq: Fix lcdif clocks
arm64: dts: imx8mq: Add missing pci property
arm64: dts: imx8mq-tqma8mq-mba8mx: Remove invalid properties
Andrew Lunn (1):
arm64: dts: freescale: ZII: Add missing phy-mode
Fabio Estevam (4):
arm64: dts: imx8mm-evk: Add HDMI support
arm64: dts: imx8mm-phg: Add display support
arm64: dts: imx8mq: Use 'dsi' as node name
arm64: dts: imx8mq: Pass address-cells/size-cells to mipi_dsi
Frank Li (1):
arm64: dts: imx8mp: Add coresight trace components
Himanshu Bhavani (1):
arm64: dts: Add support for Emtop SoM & Baseboard
Hugo Villeneuve (3):
arm64: dts: imx8mn-var-som: add SOM EEPROM
arm64: dts: imx8mn-var-som: add 20ms delay to ethernet regulator enable
arm64: dts: imx8mn-var-som-symphony: adapt FEC pinctrl for SOMs with onboard PHY
Johannes Schneider (1):
arm64: dts: add NXP i.MX8MM-EVKB support
Krzysztof Kozlowski (3):
arm64: dts: imx8mq-mnt-reform2: drop invalid simple-panel compatible
arm64: dts: imx: add missing cache properties
arm64: dts: freescale: add missing cache properties
Laurent Pinchart (2):
arm64: dts: imx8mp: Add CSIS DT nodes
arm64: dts: imx8mp: Add ISI DT node
Luca Ceresoli (1):
arm64: dts: imx8mp-msc-sm2s: Add sound card
Lucas Stach (1):
arm64: dts: imx8mp: don't initialize audio clocks from CCM node
Marek Vasut (7):
arm64: dts: imx8mp: Add SAI, SDMA, AudioMIX
arm64: dts: imx8mp: Add analog audio output on i.MX8MP EVK
arm64: dts: imx8mp: Describe PCIe clock generator on DH electronics i.MX8M Plus DHCOM on PDK3
arm64: dts: imx8mp: Sort AIPS4 nodes
arm64: dts: imx8mp: Add DeWarp Engine DT node
arm64: dts: imx8mp: Add TC9595 bridge on DH electronics i.MX8M Plus DHCOM
arm64: dts: imx8mp: Enable SAI audio on MX8MP DHCOM PDK2 and PDK3
Nicolas Cavallari (1):
arm64: dts: imx8mm-venice: Fix GSC vdd_bat data size.
Peng Fan (5):
arm64: dts: imx93: add watchdog node
arm64: dts: imx93: add ocotp node
arm64: dts: imx93: reorder device nodes
arm64: dts: imx93: add cpuidle node
arm64: dts: imx93-11x11-evk: enable wdog3
Tim Harvey (3):
arm64: dts: freescale: Add imx8mp-venice-gw7905-2x
arm64: dts: imx8mm-venice-gw700x: remove invalid props from fan-controller
arm64: dts: imx8mp-venice-gw702x: fix GSC vdd_bat data size
Wei Fang (1):
arm64: dts: imx93: add fsl,stop-mode property to support WOL
Xu Yang (1):
arm64: dts: imx93: add ddr performance monitor node
arch/arm64/boot/dts/freescale/Makefile | 3 +
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 1 +
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 1 +
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 1 +
arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 4 +
arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 4 +
arch/arm64/boot/dts/freescale/imx8dxl.dtsi | 1 +
.../boot/dts/freescale/imx8mm-emtop-baseboard.dts | 15 +
.../arm64/boot/dts/freescale/imx8mm-emtop-som.dtsi | 261 +++++++++
arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 67 +++
arch/arm64/boot/dts/freescale/imx8mm-evkb.dts | 128 +++++
arch/arm64/boot/dts/freescale/imx8mm-phg.dts | 87 +++
.../arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi | 2 +
.../boot/dts/freescale/imx8mm-venice-gw700x.dtsi | 4 +-
.../boot/dts/freescale/imx8mm-venice-gw7901.dts | 2 +-
.../boot/dts/freescale/imx8mm-venice-gw7902.dts | 2 +-
.../boot/dts/freescale/imx8mm-venice-gw7903.dts | 2 +-
.../dts/freescale/imx8mn-beacon-baseboard.dtsi | 103 +++-
.../boot/dts/freescale/imx8mn-var-som-symphony.dts | 40 --
arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi | 7 +
.../boot/dts/freescale/imx8mn-venice-gw7902.dts | 2 +-
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 60 +++
.../arm64/boot/dts/freescale/imx8mp-beacon-kit.dts | 89 ++++
.../arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts | 54 ++
.../arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts | 60 ++-
.../arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi | 72 +++
arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 80 +++
.../boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts | 70 +++
.../dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 46 ++
.../boot/dts/freescale/imx8mp-venice-gw702x.dtsi | 587 +++++++++++++++++++++
.../boot/dts/freescale/imx8mp-venice-gw74xx.dts | 2 +-
.../boot/dts/freescale/imx8mp-venice-gw7905-2x.dts | 28 +
.../boot/dts/freescale/imx8mp-venice-gw7905.dtsi | 309 +++++++++++
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 490 ++++++++++++++++-
.../boot/dts/freescale/imx8mq-mnt-reform2.dts | 2 +-
.../boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts | 4 -
.../arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 13 +-
arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 1 +
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts | 4 +
arch/arm64/boot/dts/freescale/imx93.dtsi | 135 +++--
41 files changed, 2727 insertions(+), 118 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-emtop-som.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-evkb.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905-2x.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905.dtsi
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-06-10 7:26 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-10 7:25 [GIT PULL 1/4] i.MX dt-bindings for 6.5 Shawn Guo
2023-06-10 7:25 ` [GIT PULL 2/4] i.MX ARM device tree " Shawn Guo
2023-06-10 7:25 ` Shawn Guo [this message]
2023-06-10 7:25 ` [GIT PULL 4/4] i.MX defconfig changes " Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230610072530.418847-3-shawnguo@kernel.org \
--to=shawnguo@kernel.org \
--cc=arm@kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=soc@kernel.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).