linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Jose Abreu <joabreu@synopsys.com>,
	"David S . Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Junxiao Chang <junxiao.chang@intel.com>,
	Vinod Koul <vkoul@kernel.org>,
	Bhupesh Sharma <bhupesh.sharma@linaro.org>
Cc: netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Subject: [PATCH net-next v2 09/11] net: stmmac: dwmac-qco-ethqos: use devm_stmmac_probe_config_dt()
Date: Fri, 23 Jun 2023 12:04:15 +0200	[thread overview]
Message-ID: <20230623100417.93592-10-brgl@bgdev.pl> (raw)
In-Reply-To: <20230623100417.93592-1-brgl@bgdev.pl>

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Significantly simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt(). This allows to drop the goto jumps
entirely.

The remove_new() callback now needs to be switched to
stmmac_pltfr_remove_no_dt().

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 .../stmicro/stmmac/dwmac-qcom-ethqos.c        | 49 ++++++-------------
 1 file changed, 15 insertions(+), 34 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index fa0fc53c56a3..7b9fbcb8d84d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -708,7 +708,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
+	plat_dat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac);
 	if (IS_ERR(plat_dat)) {
 		dev_err(dev, "dt configuration failed\n");
 		return PTR_ERR(plat_dat);
@@ -717,10 +717,8 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	plat_dat->clks_config = ethqos_clks_config;
 
 	ethqos = devm_kzalloc(dev, sizeof(*ethqos), GFP_KERNEL);
-	if (!ethqos) {
-		ret = -ENOMEM;
-		goto out_config_dt;
-	}
+	if (!ethqos)
+		return -ENOMEM;
 
 	ethqos->phy_mode = device_get_phy_mode(dev);
 	switch (ethqos->phy_mode) {
@@ -734,19 +732,15 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 		ethqos->configure_func = ethqos_configure_sgmii;
 		break;
 	case -ENODEV:
-		ret = -ENODEV;
-		goto out_config_dt;
+		return -ENODEV;
 	default:
-		ret = -EINVAL;
-		goto out_config_dt;
+		return -EINVAL;
 	}
 
 	ethqos->pdev = pdev;
 	ethqos->rgmii_base = devm_platform_ioremap_resource_byname(pdev, "rgmii");
-	if (IS_ERR(ethqos->rgmii_base)) {
-		ret = PTR_ERR(ethqos->rgmii_base);
-		goto out_config_dt;
-	}
+	if (IS_ERR(ethqos->rgmii_base))
+		return PTR_ERR(ethqos->rgmii_base);
 
 	ethqos->mac_base = stmmac_res.addr;
 
@@ -757,24 +751,20 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	ethqos->has_emac_ge_3 = data->has_emac_ge_3;
 
 	ethqos->link_clk = devm_clk_get(dev, data->link_clk_name ?: "rgmii");
-	if (IS_ERR(ethqos->link_clk)) {
-		ret = PTR_ERR(ethqos->link_clk);
-		goto out_config_dt;
-	}
+	if (IS_ERR(ethqos->link_clk))
+		return PTR_ERR(ethqos->link_clk);
 
 	ret = ethqos_clks_config(ethqos, true);
 	if (ret)
-		goto out_config_dt;
+		return ret;
 
 	ret = devm_add_action_or_reset(dev, ethqos_clks_disable, ethqos);
 	if (ret)
-		goto out_config_dt;
+		return ret;
 
 	ethqos->serdes_phy = devm_phy_optional_get(dev, "serdes");
-	if (IS_ERR(ethqos->serdes_phy)) {
-		ret = PTR_ERR(ethqos->serdes_phy);
-		goto out_config_dt;
-	}
+	if (IS_ERR(ethqos->serdes_phy))
+		return PTR_ERR(ethqos->serdes_phy);
 
 	ethqos->speed = SPEED_1000;
 	ethqos_update_link_clk(ethqos, SPEED_1000);
@@ -797,16 +787,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 		plat_dat->serdes_powerdown  = qcom_ethqos_serdes_powerdown;
 	}
 
-	ret = stmmac_dvr_probe(dev, plat_dat, &stmmac_res);
-	if (ret)
-		goto out_config_dt;
-
-	return ret;
-
-out_config_dt:
-	stmmac_remove_config_dt(pdev, plat_dat);
-
-	return ret;
+	return stmmac_dvr_probe(dev, plat_dat, &stmmac_res);
 }
 
 static const struct of_device_id qcom_ethqos_match[] = {
@@ -820,7 +801,7 @@ MODULE_DEVICE_TABLE(of, qcom_ethqos_match);
 
 static struct platform_driver qcom_ethqos_driver = {
 	.probe  = qcom_ethqos_probe,
-	.remove_new = stmmac_pltfr_remove,
+	.remove_new = stmmac_pltfr_remove_no_dt,
 	.driver = {
 		.name           = "qcom-ethqos",
 		.pm		= &stmmac_pltfr_pm_ops,
-- 
2.39.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2023-06-23 10:05 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-23 10:04 [PATCH net-next v2 00/11] net: stmmac: introduce devres helpers for stmmac platform drivers Bartosz Golaszewski
2023-06-23 10:04 ` [PATCH net-next v2 01/11] net: stmmac: platform: provide stmmac_pltfr_init() Bartosz Golaszewski
2023-06-23 10:04 ` [PATCH net-next v2 02/11] net: stmmac: dwmac-generic: use stmmac_pltfr_init() Bartosz Golaszewski
2023-06-23 10:04 ` [PATCH net-next v2 03/11] net: stmmac: platform: provide stmmac_pltfr_exit() Bartosz Golaszewski
2023-06-23 10:04 ` [PATCH net-next v2 04/11] net: stmmac: dwmac-generic: use stmmac_pltfr_exit() Bartosz Golaszewski
2023-06-23 10:04 ` [PATCH net-next v2 05/11] net: stmmac: platform: provide stmmac_pltfr_probe() Bartosz Golaszewski
2023-06-23 10:04 ` [PATCH net-next v2 06/11] net: stmmac: dwmac-generic: use stmmac_pltfr_probe() Bartosz Golaszewski
2023-06-23 10:04 ` [PATCH net-next v2 07/11] net: stmmac: platform: provide stmmac_pltfr_remove_no_dt() Bartosz Golaszewski
2023-06-23 10:04 ` [PATCH net-next v2 08/11] net: stmmac: platform: provide devm_stmmac_probe_config_dt() Bartosz Golaszewski
2023-06-23 10:04 ` Bartosz Golaszewski [this message]
2023-06-23 10:04 ` [PATCH net-next v2 10/11] net: stmmac: platform: provide devm_stmmac_pltfr_probe() Bartosz Golaszewski
2023-06-23 10:04 ` [PATCH net-next v2 11/11] net: stmmac: dwmac-qcom-ethqos: use devm_stmmac_pltfr_probe() Bartosz Golaszewski
2023-06-24 22:40 ` [PATCH net-next v2 00/11] net: stmmac: introduce devres helpers for stmmac platform drivers patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230623100417.93592-10-brgl@bgdev.pl \
    --to=brgl@bgdev.pl \
    --cc=alexandre.torgue@foss.st.com \
    --cc=bartosz.golaszewski@linaro.org \
    --cc=bhupesh.sharma@linaro.org \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=joabreu@synopsys.com \
    --cc=junxiao.chang@intel.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=peppe.cavallaro@st.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).