From: Mans Rullgard <mans@mansr.com>
To: Oleksij Rempel <linux@rempel-privat.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Andi Shyti <andi.shyti@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
linux-i2c@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] i2c: imx: add support for I2C_M_STOP flag
Date: Thu, 6 Jul 2023 13:57:29 +0100 [thread overview]
Message-ID: <20230706125729.17335-1-mans@mansr.com> (raw)
Add support for the I2C_M_STOP flag to the i2c-imx driver. This allows
devices requiring a stop between messages to work with this controller.
Signed-off-by: Mans Rullgard <mans@mansr.com>
---
drivers/i2c/busses/i2c-imx.c | 26 ++++++++++++++++++++++----
1 file changed, 22 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 42189a5f2905..f59d086688ff 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -1262,10 +1262,17 @@ static int i2c_imx_xfer_common(struct i2c_adapter *adapter,
/* read/write data */
for (i = 0; i < num; i++) {
- if (i == num - 1)
- is_lastmsg = true;
+ if (is_lastmsg) {
+ /* previous message had I2C_M_STOP flag set */
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp |= I2CR_MSTA;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+ result = i2c_imx_bus_busy(i2c_imx, 1, atomic);
+ if (result)
+ goto fail0;
+ }
- if (i) {
+ if (i && !is_lastmsg) {
dev_dbg(&i2c_imx->adapter.dev,
"<%s> repeated start\n", __func__);
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
@@ -1275,6 +1282,10 @@ static int i2c_imx_xfer_common(struct i2c_adapter *adapter,
if (result)
goto fail0;
}
+
+ if (i == num - 1 || (msgs[i].flags & I2C_M_STOP))
+ is_lastmsg = true;
+
dev_dbg(&i2c_imx->adapter.dev,
"<%s> transfer message: %d\n", __func__, i);
/* write/read data */
@@ -1304,6 +1315,13 @@ static int i2c_imx_xfer_common(struct i2c_adapter *adapter,
result = i2c_imx_dma_write(i2c_imx, &msgs[i]);
else
result = i2c_imx_write(i2c_imx, &msgs[i], atomic);
+
+ if (msgs[i].flags & I2C_M_STOP) {
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp &= ~I2CR_MSTA;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+ i2c_imx_bus_busy(i2c_imx, 0, atomic);
+ }
}
if (result)
goto fail0;
@@ -1425,7 +1443,7 @@ static int i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
static u32 i2c_imx_func(struct i2c_adapter *adapter)
{
- return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL
+ return I2C_FUNC_I2C | I2C_FUNC_PROTOCOL_MANGLING | I2C_FUNC_SMBUS_EMUL
| I2C_FUNC_SMBUS_READ_BLOCK_DATA;
}
--
2.41.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2023-07-06 12:58 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-06 12:57 Mans Rullgard [this message]
2023-07-14 13:22 ` [PATCH] i2c: imx: add support for I2C_M_STOP flag Oleksij Rempel
2023-07-27 20:30 ` Andi Shyti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230706125729.17335-1-mans@mansr.com \
--to=mans@mansr.com \
--cc=andi.shyti@kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@rempel-privat.de \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox