From: Guiting Shen <aarongt.shen@gmail.com>
To: thierry.reding@gmail.com, u.kleine-koenig@pengutronix.de
Cc: linux-pwm@vger.kernel.org, alexandre.belloni@bootlin.com,
Guiting Shen <aarongt.shen@gmail.com>,
linux-kernel@vger.kernel.org, claudiu.beznea@microchip.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4] pwm: atmel: Enable clk when pwm already enabled in bootloader
Date: Wed, 12 Jul 2023 21:43:47 +0800 [thread overview]
Message-ID: <20230712134347.14897-1-aarongt.shen@gmail.com> (raw)
The driver would never call clk_enable() if the PWM channel was already
enabled in bootloader which lead to dump the warning message "the PWM
clock already disabled" when turning off the PWM channel.
Add atmel_pwm_enable_clk_if_on() in probe function to enable clock if
the PWM channel was already enabled in bootloader.
Signed-off-by: Guiting Shen <aarongt.shen@gmail.com>
---
drivers/pwm/pwm-atmel.c | 40 +++++++++++++++++++++++++++++++++++++++-
1 file changed, 39 insertions(+), 1 deletion(-)
diff --git a/drivers/pwm/pwm-atmel.c b/drivers/pwm/pwm-atmel.c
index cdbc23649032..28ea0f7267ca 100644
--- a/drivers/pwm/pwm-atmel.c
+++ b/drivers/pwm/pwm-atmel.c
@@ -36,7 +36,7 @@
#define PWM_SR 0x0C
#define PWM_ISR 0x1C
/* Bit field in SR */
-#define PWM_SR_ALL_CH_ON 0x0F
+#define PWM_SR_ALL_CH_MASK 0x0F
/* The following register is PWM channel related registers */
#define PWM_CH_REG_OFFSET 0x200
@@ -464,6 +464,37 @@ static const struct of_device_id atmel_pwm_dt_ids[] = {
};
MODULE_DEVICE_TABLE(of, atmel_pwm_dt_ids);
+static int atmel_pwm_enable_clk_if_on(struct atmel_pwm_chip *atmel_pwm)
+{
+ unsigned int i;
+ int err;
+ u32 sr;
+
+ sr = atmel_pwm_readl(atmel_pwm, PWM_SR);
+ if (!(sr & PWM_SR_ALL_CH_MASK))
+ return 0;
+
+ for (i = 0; i < atmel_pwm->chip.npwm; i++) {
+ if (!(sr & (1 << i)))
+ continue;
+
+ err = clk_enable(atmel_pwm->clk);
+ if (err) {
+ dev_err(atmel_pwm->chip.dev,
+ "failed to enable clock for pwm #%d: %pe\n",
+ i, ERR_PTR(err));
+
+ while (i--) {
+ if (sr & (1 << i))
+ clk_disable(atmel_pwm->clk);
+ }
+ return err;
+ }
+ }
+
+ return 0;
+}
+
static int atmel_pwm_probe(struct platform_device *pdev)
{
struct atmel_pwm_chip *atmel_pwm;
@@ -504,8 +535,15 @@ static int atmel_pwm_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, atmel_pwm);
+ ret = atmel_pwm_enable_clk_if_on(atmel_pwm);
+ if (ret < 0)
+ goto remove_pwmchip;
+
return ret;
+remove_pwmchip:
+ pwmchip_remove(&atmel_pwm->chip);
+
unprepare_clk:
clk_unprepare(atmel_pwm->clk);
return ret;
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2023-07-12 13:44 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-12 13:43 Guiting Shen [this message]
2023-07-12 13:55 ` [PATCH v4] pwm: atmel: Enable clk when pwm already enabled in bootloader Uwe Kleine-König
2023-07-12 14:28 ` Guiting Shen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230712134347.14897-1-aarongt.shen@gmail.com \
--to=aarongt.shen@gmail.com \
--cc=alexandre.belloni@bootlin.com \
--cc=claudiu.beznea@microchip.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).