* [PATCH] ARM: dts: at91: ksz9477_evb: Add missing timer nodes
@ 2023-07-12 15:21 Lukasz Majewski
[not found] ` <20230726101902.769f6541@wsk>
0 siblings, 1 reply; 3+ messages in thread
From: Lukasz Majewski @ 2023-07-12 15:21 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski
Cc: devicetree, Conor Dooley, Alexandre Belloni, linux-kernel,
Lukasz Majewski, Claudiu Beznea, linux-arm-kernel
Without this change the KSZ9477-EVB board hangs just after passing
execution flow from u-boot to Linux kernel.
This code has been copied from at91-sama5d3_xplained.dts.
Test setup: Linux 6.5-rc1
Config: arch/arm/configs/sama5_defconfig
Toolchain: gcc-linaro-7.3.1-2018.05-x86_64_arm-linux-gnueabi
Signed-off-by: Lukasz Majewski <lukma@denx.de>
---
.../boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts
index 14af1fd6d247..99cd6d15998b 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts
@@ -162,6 +162,18 @@
};
};
+&tcb0 {
+ timer0: timer@0 {
+ compatible = "atmel,tcb-timer";
+ reg = <0>;
+ };
+
+ timer1: timer@1 {
+ compatible = "atmel,tcb-timer";
+ reg = <1>;
+ };
+};
+
&usb0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread[parent not found: <20230726101902.769f6541@wsk>]
[parent not found: <20230726-igloo-science-96e926f086f6@spud>]
* Re: [PATCH] ARM: dts: at91: ksz9477_evb: Add missing timer nodes [not found] ` <20230726-igloo-science-96e926f086f6@spud> @ 2023-07-27 5:37 ` claudiu beznea 0 siblings, 0 replies; 3+ messages in thread From: claudiu beznea @ 2023-07-27 5:37 UTC (permalink / raw) To: Conor Dooley, Lukasz Majewski Cc: devicetree, Alexandre Belloni, linux-kernel, Conor Dooley, Rob Herring, Krzysztof Kozlowski, Claudiu Beznea, linux-arm-kernel On 26.07.2023 21:33, Conor Dooley wrote: > On Wed, Jul 26, 2023 at 10:19:02AM +0200, Lukasz Majewski wrote: >> Dear Community, >> >>> Without this change the KSZ9477-EVB board hangs just after passing >>> execution flow from u-boot to Linux kernel. >>> >>> This code has been copied from at91-sama5d3_xplained.dts. >>> >>> Test setup: Linux 6.5-rc1 >>> Config: arch/arm/configs/sama5_defconfig >>> Toolchain: gcc-linaro-7.3.1-2018.05-x86_64_arm-linux-gnueabi >>> >>> Signed-off-by: Lukasz Majewski <lukma@denx.de> >>> --- >>> .../boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts | 12 >>> ++++++++++++ 1 file changed, 12 insertions(+) >>> >>> diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts >>> b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts index >>> 14af1fd6d247..99cd6d15998b 100644 --- >>> a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts +++ >>> b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts @@ -162,6 >>> +162,18 @@ }; >>> }; >>> >>> +&tcb0 { >>> + timer0: timer@0 { >>> + compatible = "atmel,tcb-timer"; >>> + reg = <0>; >>> + }; >>> + >>> + timer1: timer@1 { >>> + compatible = "atmel,tcb-timer"; >>> + reg = <1>; >>> + }; >>> +}; >>> + >>> &usb0 { >>> pinctrl-names = "default"; >>> pinctrl-0 = <&pinctrl_usba_vbus>; >> >> Gentle ping on this fix ... > > Claudiu has left Microchip, so things might've got a bit lost on the > way. I've added his new address, Claudiu, will you take a look/pick this > up please? I can also do it if that is easier for you. It's on my list. Thanks, Claudiu > > Thanks, > Conor. > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: dts: at91: ksz9477_evb: Add missing timer nodes [not found] ` <20230726101902.769f6541@wsk> [not found] ` <20230726-igloo-science-96e926f086f6@spud> @ 2023-08-02 4:50 ` claudiu beznea 1 sibling, 0 replies; 3+ messages in thread From: claudiu beznea @ 2023-08-02 4:50 UTC (permalink / raw) To: Lukasz Majewski, Rob Herring, Krzysztof Kozlowski Cc: devicetree, Conor Dooley, Alexandre Belloni, linux-kernel, Claudiu Beznea, linux-arm-kernel On 26.07.2023 11:19, Lukasz Majewski wrote: > Dear Community, > >> Without this change the KSZ9477-EVB board hangs just after passing >> execution flow from u-boot to Linux kernel. >> >> This code has been copied from at91-sama5d3_xplained.dts. >> >> Test setup: Linux 6.5-rc1 >> Config: arch/arm/configs/sama5_defconfig >> Toolchain: gcc-linaro-7.3.1-2018.05-x86_64_arm-linux-gnueabi >> >> Signed-off-by: Lukasz Majewski <lukma@denx.de> Applied to at91-dt, thanks! _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-08-02 4:50 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-07-12 15:21 [PATCH] ARM: dts: at91: ksz9477_evb: Add missing timer nodes Lukasz Majewski
[not found] ` <20230726101902.769f6541@wsk>
[not found] ` <20230726-igloo-science-96e926f086f6@spud>
2023-07-27 5:37 ` claudiu beznea
2023-08-02 4:50 ` claudiu beznea
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).