linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Alexander Potapenko <glider@google.com>
To: glider@google.com, catalin.marinas@arm.com, will@kernel.org,
	pcc@google.com, andreyknvl@gmail.com,
	andriy.shevchenko@linux.intel.com, linux@rasmusvillemoes.dk,
	yury.norov@gmail.com
Cc: linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, eugenis@google.com,
	syednwaris@gmail.com, william.gray@linaro.org,
	Arnd Bergmann <arnd@arndb.de>
Subject: [PATCH v3 1/5] lib/bitmap: add bitmap_{set,get}_value()
Date: Mon, 17 Jul 2023 13:37:04 +0200	[thread overview]
Message-ID: <20230717113709.328671-2-glider@google.com> (raw)
In-Reply-To: <20230717113709.328671-1-glider@google.com>

The two new functions allow setting/getting values of length up to
BITS_PER_LONG bits at arbitrary position in the bitmap.

The code was taken from "bitops: Introduce the for_each_set_clump macro"
by Syed Nayyar Waris with a couple of minor changes:
 - instead of using roundup(), which adds an unnecessary dependency
   on <linux/math.h>, we calculate space as BITS_PER_LONG-offset;
 - indentation is reduced by not using else-clauses (suggested by
   checkpatch for bitmap_get_value())

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Syed Nayyar Waris <syednwaris@gmail.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/lkml/fe12eedf3666f4af5138de0e70b67a07c7f40338.1592224129.git.syednwaris@gmail.com/
Suggested-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Potapenko <glider@google.com>
---
 include/linux/bitmap.h | 57 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 57 insertions(+)

diff --git a/include/linux/bitmap.h b/include/linux/bitmap.h
index 03644237e1efb..4559366084988 100644
--- a/include/linux/bitmap.h
+++ b/include/linux/bitmap.h
@@ -76,7 +76,11 @@ struct device;
  *  bitmap_to_arr32(buf, src, nbits)            Copy nbits from buf to u32[] dst
  *  bitmap_to_arr64(buf, src, nbits)            Copy nbits from buf to u64[] dst
  *  bitmap_get_value8(map, start)               Get 8bit value from map at start
+ *  bitmap_get_value(map, start, nbits)         Get bit value of size 'nbits'
+ *                                              from map at start
  *  bitmap_set_value8(map, value, start)        Set 8bit value to map at start
+ *  bitmap_set_value(map, value, start, nbits)  Set bit value of size 'nbits'
+ *                                              of map at start
  *
  * Note, bitmap_zero() and bitmap_fill() operate over the region of
  * unsigned longs, that is, bits behind bitmap till the unsigned long
@@ -583,6 +587,31 @@ static inline unsigned long bitmap_get_value8(const unsigned long *map,
 	return (map[index] >> offset) & 0xFF;
 }
 
+/**
+ * bitmap_get_value - get a value of n-bits from the memory region
+ * @map: address to the bitmap memory region
+ * @start: bit offset of the n-bit value
+ * @nbits: size of value in bits
+ *
+ * Returns value of nbits located at the @start bit offset within the @map
+ * memory region.
+ */
+static inline unsigned long bitmap_get_value(const unsigned long *map,
+					     unsigned long start,
+					     unsigned long nbits)
+{
+	const size_t index = BIT_WORD(start);
+	const unsigned long offset = start % BITS_PER_LONG;
+	const unsigned long space = BITS_PER_LONG - offset;
+	unsigned long value_low, value_high;
+
+	if (space >= nbits)
+		return (map[index] >> offset) & GENMASK(nbits - 1, 0);
+	value_low = map[index] & BITMAP_FIRST_WORD_MASK(start);
+	value_high = map[index + 1] & BITMAP_LAST_WORD_MASK(start + nbits);
+	return (value_low >> offset) | (value_high << space);
+}
+
 /**
  * bitmap_set_value8 - set an 8-bit value within a memory region
  * @map: address to the bitmap memory region
@@ -599,6 +628,34 @@ static inline void bitmap_set_value8(unsigned long *map, unsigned long value,
 	map[index] |= value << offset;
 }
 
+/**
+ * bitmap_set_value - set n-bit value within a memory region
+ * @map: address to the bitmap memory region
+ * @value: value of nbits
+ * @start: bit offset of the n-bit value
+ * @nbits: size of value in bits
+ */
+static inline void bitmap_set_value(unsigned long *map,
+				    unsigned long value,
+				    unsigned long start, unsigned long nbits)
+{
+	const size_t index = BIT_WORD(start);
+	const unsigned long offset = start % BITS_PER_LONG;
+	const unsigned long space = BITS_PER_LONG - offset;
+
+	value &= GENMASK(nbits - 1, 0);
+
+	if (space >= nbits) {
+		map[index] &= ~(GENMASK(nbits + offset - 1, offset));
+		map[index] |= value << offset;
+		return;
+	}
+	map[index] &= ~BITMAP_FIRST_WORD_MASK(start);
+	map[index] |= value << offset;
+	map[index + 1] &= ~BITMAP_LAST_WORD_MASK(start + nbits);
+	map[index + 1] |= (value >> space);
+}
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* __LINUX_BITMAP_H */
-- 
2.41.0.255.g8b1d071c50-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2023-07-17 11:38 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-17 11:37 [PATCH v3 0/5] Implement MTE tag compression for swapped pages Alexander Potapenko
2023-07-17 11:37 ` Alexander Potapenko [this message]
2023-07-17 13:01   ` [PATCH v3 1/5] lib/bitmap: add bitmap_{set,get}_value() Andy Shevchenko
2023-07-17 14:14     ` Alexander Potapenko
2023-07-17 14:29       ` Andy Shevchenko
2023-07-17 14:31         ` Andy Shevchenko
2023-07-17 16:15           ` Yury Norov
2023-07-17 14:53       ` Alexander Potapenko
2023-07-17 15:03         ` Andy Shevchenko
2023-07-17 16:29           ` Alexander Potapenko
2023-07-17 15:50   ` Yury Norov
2023-07-18  9:30     ` Alexander Potapenko
2023-07-18 14:01       ` Andy Shevchenko
2023-07-18 17:03         ` Yury Norov
2023-07-18 17:20           ` Andy Shevchenko
2023-07-19  9:00           ` Alexander Potapenko
2023-07-17 11:37 ` [PATCH v3 2/5] lib/test_bitmap: add tests for bitmap_{set,get}_value() Alexander Potapenko
2023-07-17 13:04   ` Andy Shevchenko
2023-07-18 10:19     ` Alexander Potapenko
2023-07-17 16:11   ` Yury Norov
2023-07-17 16:28     ` Andy Shevchenko
2023-07-17 16:42     ` Alexander Potapenko
2023-07-17 11:37 ` [PATCH v3 3/5] arm64: mte: implement CONFIG_ARM64_MTE_COMP Alexander Potapenko
2023-07-17 13:49   ` Andy Shevchenko
2023-07-18 15:33     ` Alexander Potapenko
2023-07-18 17:17       ` Andy Shevchenko
2023-07-19 12:16         ` Alexander Potapenko
2023-07-19  6:09   ` Yury Norov
2023-07-19 14:00     ` Alexander Potapenko
2023-07-19 21:06       ` Yury Norov
2023-07-20 12:00         ` Alexander Potapenko
2023-07-19 20:32     ` Evgenii Stepanov
2023-07-17 11:37 ` [PATCH v3 4/5] arm64: mte: add a test for MTE tags compression Alexander Potapenko
2023-07-17 11:37 ` [PATCH v3 5/5] arm64: mte: add compression support to mteswap.c Alexander Potapenko
2023-07-17 13:53   ` Andy Shevchenko
2023-07-18 10:48     ` Alexander Potapenko
2023-07-18 14:13       ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230717113709.328671-2-glider@google.com \
    --to=glider@google.com \
    --cc=andreyknvl@gmail.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=arnd@arndb.de \
    --cc=catalin.marinas@arm.com \
    --cc=eugenis@google.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@rasmusvillemoes.dk \
    --cc=pcc@google.com \
    --cc=syednwaris@gmail.com \
    --cc=will@kernel.org \
    --cc=william.gray@linaro.org \
    --cc=yury.norov@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).