Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Jayesh Choudhary <j-choudhary@ti.com>
To: <nm@ti.com>, <vigneshr@ti.com>, <s-vadapalli@ti.com>, <afd@ti.com>
Cc: <kristo@kernel.org>, <robh+dt@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>,
	<rogerq@kernel.org>, <a-bhatia1@ti.com>, <r-ravikumar@ti.com>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>, <j-choudhary@ti.com>
Subject: [PATCH v7 3/4] arm64: dts: ti: k3-j784s4-main: Add DSS and DP-bridge node
Date: Fri, 28 Jul 2023 10:38:58 +0530	[thread overview]
Message-ID: <20230728050859.7370-4-j-choudhary@ti.com> (raw)
In-Reply-To: <20230728050859.7370-1-j-choudhary@ti.com>

From: Rahul T R <r-ravikumar@ti.com>

Add DSS and DP-bridge node for J784S4 SoC. DSS IP in J784S4 is
same as DSS IP in J721E, so same compatible is being used.
The DP is Cadence MHDP8546.

Signed-off-by: Rahul T R <r-ravikumar@ti.com>
[j-choudhary@ti.com: move dss & mhdp node together in main, fix dss node]
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 73 ++++++++++++++++++++++
 1 file changed, 73 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index fbf5ab94d785..975661948755 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -1749,4 +1749,77 @@ c71_3: dsp@67800000 {
 		resets = <&k3_reset 40 1>;
 		firmware-name = "j784s4-c71_3-fw";
 	};
+
+	mhdp: dp-bridge@a000000 {
+		compatible = "ti,j721e-mhdp8546";
+
+		reg = <0x0 0xa000000 0x0 0x30a00>,
+		      <0x0 0x4f40000 0x0 0x20>;
+		reg-names = "mhdptx", "j721e-intg";
+
+		clocks = <&k3_clks 217 11>;
+
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>;
+
+		power-domains = <&k3_pds 217 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+
+		dp0_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	dss: dss@4a00000 {
+		compatible = "ti,j721e-dss";
+		reg = <0x00 0x04a00000 0x00 0x10000>, /* common_m */
+		      <0x00 0x04a10000 0x00 0x10000>, /* common_s0*/
+		      <0x00 0x04b00000 0x00 0x10000>, /* common_s1*/
+		      <0x00 0x04b10000 0x00 0x10000>, /* common_s2*/
+		      <0x00 0x04a20000 0x00 0x10000>, /* vidl1 */
+		      <0x00 0x04a30000 0x00 0x10000>, /* vidl2 */
+		      <0x00 0x04a50000 0x00 0x10000>, /* vid1 */
+		      <0x00 0x04a60000 0x00 0x10000>, /* vid2 */
+		      <0x00 0x04a70000 0x00 0x10000>, /* ovr1 */
+		      <0x00 0x04a90000 0x00 0x10000>, /* ovr2 */
+		      <0x00 0x04ab0000 0x00 0x10000>, /* ovr3 */
+		      <0x00 0x04ad0000 0x00 0x10000>, /* ovr4 */
+		      <0x00 0x04a80000 0x00 0x10000>, /* vp1 */
+		      <0x00 0x04aa0000 0x00 0x10000>, /* vp1 */
+		      <0x00 0x04ac0000 0x00 0x10000>, /* vp1 */
+		      <0x00 0x04ae0000 0x00 0x10000>, /* vp4 */
+		      <0x00 0x04af0000 0x00 0x10000>; /* wb */
+
+		reg-names = "common_m", "common_s0",
+			    "common_s1", "common_s2",
+			    "vidl1", "vidl2","vid1","vid2",
+			    "ovr1", "ovr2", "ovr3", "ovr4",
+			    "vp1", "vp2", "vp3", "vp4",
+			    "wb";
+
+		clocks = <&k3_clks 218 0>,
+			 <&k3_clks 218 2>,
+			 <&k3_clks 218 5>,
+			 <&k3_clks 218 14>,
+			 <&k3_clks 218 18>;
+		clock-names = "fck", "vp1", "vp2", "vp3", "vp4";
+
+		power-domains = <&k3_pds 218 TI_SCI_PD_EXCLUSIVE>;
+
+		interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "common_m",
+				  "common_s0",
+				  "common_s1",
+				  "common_s2";
+
+		status = "disabled";
+
+		dss_ports: ports {
+		};
+	};
 };
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2023-07-28  5:09 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-28  5:08 [PATCH v7 0/4] Add peripherals for J784S4 Jayesh Choudhary
2023-07-28  5:08 ` [PATCH v7 1/4] arm64: dts: ti: k3-j784s4-main: Add system controller and SERDES lane mux Jayesh Choudhary
2023-07-28  5:08 ` [PATCH v7 2/4] arm64: dts: ti: k3-j784s4: Add WIZ and SERDES PHY nodes Jayesh Choudhary
2023-07-28  5:08 ` Jayesh Choudhary [this message]
2023-07-28  5:08 ` [PATCH v7 4/4] arm64: dts: ti: k3-j784s4-evm: Enable DisplayPort-0 Jayesh Choudhary
2023-07-28 21:12 ` [PATCH v7 0/4] Add peripherals for J784S4 Nishanth Menon
2023-07-31 11:04   ` Jayesh Choudhary

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230728050859.7370-4-j-choudhary@ti.com \
    --to=j-choudhary@ti.com \
    --cc=a-bhatia1@ti.com \
    --cc=afd@ti.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=r-ravikumar@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=rogerq@kernel.org \
    --cc=s-vadapalli@ti.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox