* Re: [PATCH V2 00/10] arm64: dts: imx8ulp: add more nodes
[not found] <20230724075833.2763190-1-peng.fan@oss.nxp.com>
@ 2023-07-30 13:19 ` Shawn Guo
0 siblings, 0 replies; only message in thread
From: Shawn Guo @ 2023-07-30 13:19 UTC (permalink / raw)
To: Peng Fan (OSS)
Cc: robh+dt, krzysztof.kozlowski+dt, s.hauer, kernel, festevam,
linux-imx, devicetree, linux-arm-kernel, linux-kernel, Peng Fan
On Mon, Jul 24, 2023 at 03:58:23PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> V2:
> Add blank line between property and child node in patch 3
> Move compatible in the beginning in patch 8
> For patch 9, the pinctrl settings are same, because drive strengh only
> has a enable/disable bit.
>
> Add flexspi, cm33, thermal, cpuidle, reserved memory nodes
> Enable flexspi, lpi2c7, spi-nor, cm33 for i.MX8ULP-EVK
> Set default clock for SDHC
>
> Haibo Chen (3):
> arm64: dts: imx8ulp: add flexspi node
> arm64: dts: imx8ulp-evk: add 100MHz/200MHz pinctrl setting for eMMC
> arm64: dts: imx8ulp-evk: enable lpi2c7 bus
>
> Han Xu (1):
> arm64: dts: imx8ulp-evk: add spi-nor device support
>
> Peng Fan (6):
> arm64: dts: imx8ulp: add cm33 node
> arm64: dts: imx8ulp: set default clock for SDHC
> arm64: dts: imx8ulp: add thermal node
> arm64: dts: imx8ulp: add cpuidle node
> arm64: dts: imx8ulp-evk: add reserved memory for cma
> arm64: dts: imx8ulp-evk: enable CM33 node
Applied all, thanks!
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] only message in thread