[PATCH v2 11/13] arm64: dts: ti: k3-j721e: Enable TSCADC nodes at the board level

From: Andrew Davis <afd@ti.com>
To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
	Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>, Dhruva Gole <d-gole@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Andrew Davis <afd@ti.com>
Subject: [PATCH v2 11/13] arm64: dts: ti: k3-j721e: Enable TSCADC nodes at the board level
Date: Tue, 8 Aug 2023 08:34:55 -0500	[thread overview]
Message-ID: <20230808133457.25060-12-afd@ti.com> (raw)
In-Reply-To: <20230808133457.25060-1-afd@ti.com>

TSCADC nodes defined in the top-level J721e SoC dtsi files are incomplete
and may not be functional unless they are extended with pinmux and/or
device information.

Disable the TSCADC nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts    |  2 ++
 arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts |  2 ++
 arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi       |  2 ++
 arch/arm64/boot/dts/ti/k3-j721e-sk.dts                | 10 ----------
 4 files changed, 6 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
index f06e7bda46f01..9f3a809ddf90b 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
@@ -747,6 +747,7 @@ &usb1 {
 };
 
 &tscadc0 {
+	status = "okay";
 	/* BBB Header: P9.39, P9.40, P9.37, P9.38, P9.33, P9.36, P9.35 */
 	adc {
 		ti,adc-channels = <0 1 2 3 4 5 6>;
@@ -754,6 +755,7 @@ adc {
 };
 
 &tscadc1 {
+	status = "okay";
 	/* MCU mikroBUS Header J10.1 - MCU_ADC1_AIN0 */
 	adc {
 		ti,adc-channels = <0>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 824874a7dcb95..fe5207ac7d85d 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -619,12 +619,14 @@ partition@3fe0000 {
 };
 
 &tscadc0 {
+	status = "okay";
 	adc {
 		ti,adc-channels = <0 1 2 3 4 5 6 7>;
 	};
 };
 
 &tscadc1 {
+	status = "okay";
 	adc {
 		ti,adc-channels = <0 1 2 3 4 5 6 7>;
 	};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index 4d107eee9b341..37a8c80de3bc5 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -411,6 +411,7 @@ tscadc0: tscadc@40200000 {
 		dmas = <&main_udmap 0x7400>,
 			<&main_udmap 0x7401>;
 		dma-names = "fifo0", "fifo1";
+		status = "disabled";
 
 		adc {
 			#io-channel-cells = <1>;
@@ -430,6 +431,7 @@ tscadc1: tscadc@40210000 {
 		dmas = <&main_udmap 0x7402>,
 			<&main_udmap 0x7403>;
 		dma-names = "fifo0", "fifo1";
+		status = "disabled";
 
 		adc {
 			#io-channel-cells = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index ed4994d264f26..4032601fd53fa 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -828,16 +828,6 @@ &usb1 {
 	phy-names = "cdns3,usb3-phy";
 };
 
-&tscadc0 {
-	/* Unused */
-	status = "disabled";
-};
-
-&tscadc1 {
-	/* Unused */
-	status = "disabled";
-};
-
 &mcu_cpsw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
-- 
2.39.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
