From: Hari Nagalla <hnagalla@ti.com>
To: <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
<conor+dt@kernel.org>
Cc: <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>
Subject: [PATCH v2 5/5] arm64: dts: ti: k3-am62a7-sk: Enable ipc with remote proc nodes
Date: Wed, 9 Aug 2023 19:58:50 -0500 [thread overview]
Message-ID: <20230810005850.21998-6-hnagalla@ti.com> (raw)
In-Reply-To: <20230810005850.21998-1-hnagalla@ti.com>
From: Devarsh Thakkar <devarsht@ti.com>
Reserve memory for remote rpoc IPC and bind the mailbox assignments
for each remote proc. Two memory regions are reserved for each
remote processor. The first region of 1Mb of memory is used for Vring
shared buffers and the second region is used as external memory to the
remote processor, resource table and as tracebuffer.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
---
Changes since v1:
- no change
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 68 +++++++++++++++++++++++++
1 file changed, 68 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index cff283c75f8e..b589c73972df 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -51,11 +51,40 @@ secure_ddr: optee@9e800000 {
no-map;
};
+ wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9c800000 0x00 0x100000>;
+ no-map;
+ };
+
wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9c900000 0x00 0x01e00000>;
no-map;
};
+ mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@9b800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9b800000 0x00 0x100000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core0_memory_region: r5f-dma-memory@9b900000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9b900000 0x00 0x0f00000>;
+ no-map;
+ };
+
+ c7x_0_dma_memory_region: c7x-dma-memory@99800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x99800000 0x00 0x100000>;
+ no-map;
+ };
+
+ c7x_0_memory_region: c7x-memory@99900000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x99900000 0x00 0x01efffff>;
+ no-map;
+ };
};
vmain_pd: regulator-0 {
@@ -361,3 +390,42 @@ cpsw3g_phy0: ethernet-phy@0 {
ti,min-output-impedance;
};
};
+
+&mailbox0_cluster0 {
+ mbox_r5_0: mbox-r5-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&mailbox0_cluster1 {
+ mbox_c7x_0: mbox-c7x-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&mailbox0_cluster2 {
+ mbox_mcu_r5_0: mbox-mcu-r5-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&c7x_0 {
+ mboxes = <&mailbox0_cluster1>, <&mbox_c7x_0>;
+ memory-region = <&c7x_0_dma_memory_region>,
+ <&c7x_0_memory_region>;
+};
+
+&wkup_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster0>, <&mbox_r5_0>;
+ memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+ <&wkup_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster2>, <&mbox_mcu_r5_0>;
+ memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+ <&mcu_r5fss0_core0_memory_region>;
+};
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-08-10 0:59 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-10 0:58 [PATCH v2 0/5] Add R5F and C7x DSP nodes for AM62a SoC Hari Nagalla
2023-08-10 0:58 ` [PATCH v2 1/5] dt-bindings: remoteproc: k3-dsp: correct optional sram properties for AM62A SoCs Hari Nagalla
2023-08-10 1:19 ` Rob Herring
2023-08-10 16:05 ` Conor Dooley
2023-08-10 0:58 ` [PATCH v2 2/5] arm64: dts: k3-am62a-main: Add C7xv device node Hari Nagalla
2023-08-10 0:58 ` [PATCH v2 3/5] arm64: dts: k3-am62a-mcu: Add R5F remote proc node Hari Nagalla
2023-08-10 0:58 ` [PATCH v2 4/5] arm64: dts: k3-am62a-wakeup: Add R5F device node Hari Nagalla
2023-08-10 0:58 ` Hari Nagalla [this message]
2023-08-10 1:12 ` [PATCH v2 0/5] Add R5F and C7x DSP nodes for AM62a SoC Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230810005850.21998-6-hnagalla@ti.com \
--to=hnagalla@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox