From: Shawn Guo <shawnguo@kernel.org>
To: soc@kernel.org, arm@kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>,
Fabio Estevam <festevam@gmail.com>,
Stefan Agner <stefan@agner.ch>, Li Yang <leoyang.li@nxp.com>,
kernel@pengutronix.de, linux-imx@nxp.com,
linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL 4/6] i.MX ARM device tree change for 6.6
Date: Sun, 13 Aug 2023 21:33:52 +0800 [thread overview]
Message-ID: <20230813133354.847010-4-shawnguo@kernel.org> (raw)
In-Reply-To: <20230813133354.847010-1-shawnguo@kernel.org>
The following changes since commit 06c2afb862f9da8dc5efa4b6076a0e48c3fbaaa5:
Linux 6.5-rc1 (2023-07-09 13:53:13 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-6.6
for you to fetch changes up to db92a8d917c7d959584cc15f838a134c1b115915:
ARM: dts: imx6qdl: mba6: Fix gpio-keys button node names (2023-08-12 09:45:11 +0800)
----------------------------------------------------------------
i.MX ARM device tree change for 6.6:
- New device tree for TQ-Systems MBLS102xA board.
- A bunch of dtschema warning fixes from Fabio Estevam and
Krzysztof Kozlowski.
- Add missing supply regulator for imx6qdl-mba6 and imx6qdl-tqma6x.
- Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties.
- Disable the internal i.MX6 watchdog and rely on PMIC reboot handler
for phycore and pfla02 boards.
- Replace NO_PAD_CTL by explicit pad configuration for karo-tx25 board.
----------------------------------------------------------------
Alexander Stein (8):
ARM: dts: imx6qdl-mba6: Add missing supply regulator for lm75 and at24
ARM: dts: imx6qdl-tqma6x: Add missing vs-supply for lm75
ARM: dts: nxp/imx: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties
ARM: dts: ls1021a: add TQ-Systems MBLS102xA device tree
ARM: dts: ls1021a: add TQMLS1021A flash partition layout
ARM: dts: imx6ul: mba6ulx: Fix stmpe811 node warnings
ARM: dts: imx6ul: Fix nand-controller #size-cells
ARM: dts: imx6qdl: mba6: Fix gpio-keys button node names
Andrej Picej (2):
ARM: dts: imx6: pfla02: Rely on PMIC reboot/reset handler
ARM: dts: imx6: phycore: Rely on PMIC reboot/reset handler
Fabio Estevam (13):
ARM: dts: imx: Remove regulators from simple-bus
ARM: dts: imx7d-sdb: Pass the Ethernet aliases
ARM: dts: imx6sx: Describe the default LCDIF1 parent
ARM: dts: imx53-qsb: Improve the parallel display description
ARM: dts: imx6ul-geam: Remove invalid sgtl5000 property
ARM: dts: imx: Pass #sound-dai-cells to sgtl5000
ARM: dts: imx: Remove 'compatible' from the pfuze nodes
ARM: dts: imx6q-cm-fx6: Remove invalid SPI flash entry
ARM: dts: imx50-evk: Use generic node name for SPI NOR flash
ARM: dts: imx53-smd: Remove invalid SPI flash entry
ARM: dts: vfxxx: Pass 'mmc' as the esdhc node names
ARM: dts: imx6q-prti6q: Fix the SDIO wifi node
ARM: dts: imx6dl-b1x5pv2: Fix simple-audio routing property
Krzysztof Kozlowski (11):
ARM: dts: nxp: add missing space before {
ARM: dts: imx1-apf9328: correct ethernet reg addresses (split)
ARM: dts: imx6sx-nitrogen6sx: drop incorrect regulator clock-names
ARM: dts: imx6ull-colibri: drop incorrect regulator regulator-type
ARM: dts: imx28-m28evk: populate fixed regulators
ARM: dts: imx50-kobo-aura: switch to enable-gpios
ARM: dts: imx23: drop incorrect reg in fixed regulators
ARM: dts: imx25: drop incorrect reg in fixed regulators
ARM: dts: imx27: drop incorrect reg in fixed regulators
ARM: dts: imx28: drop incorrect reg in fixed regulators
ARM: dts: nxp: mxs: split interrupts per cells
Uwe Kleine-König (1):
ARM: dts: imx25/karo-tx25: Replace NO_PAD_CTL by explicit pad configuration
arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts | 6 +-
.../imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts | 25 +-
arch/arm/boot/dts/nxp/imx/imx25-karo-tx25.dts | 71 ++--
arch/arm/boot/dts/nxp/imx/imx25-pdk.dts | 62 ++--
arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts | 19 +-
.../nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts | 25 +-
.../dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts | 19 +-
.../boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts | 21 +-
.../boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi | 30 +-
arch/arm/boot/dts/nxp/imx/imx27.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx31.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx50-evk.dts | 2 +-
arch/arm/boot/dts/nxp/imx/imx50-kobo-aura.dts | 2 +-
arch/arm/boot/dts/nxp/imx/imx50.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx51-babbage.dts | 25 +-
.../nxp/imx/imx51-eukrea-mbimxsd51-baseboard.dts | 23 +-
arch/arm/boot/dts/nxp/imx/imx51.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx53-ard.dts | 19 +-
arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi | 34 +-
arch/arm/boot/dts/nxp/imx/imx53-m53evk.dts | 34 +-
arch/arm/boot/dts/nxp/imx/imx53-mba53.dts | 33 +-
arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi | 65 ++--
arch/arm/boot/dts/nxp/imx/imx53-smd.dts | 4 +-
arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi | 19 +-
.../arm/boot/dts/nxp/imx/imx53-voipac-dmm-668.dtsi | 36 +-
arch/arm/boot/dts/nxp/imx/imx53.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx6dl-b1x5pv2.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts | 1 +
arch/arm/boot/dts/nxp/imx/imx6q-arm2.dts | 36 +-
arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts | 2 -
arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi | 1 +
arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts | 2 +-
arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts | 55 ++-
arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts | 1 +
arch/arm/boot/dts/nxp/imx/imx6q-gk802.dts | 19 +-
arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts | 67 ++--
arch/arm/boot/dts/nxp/imx/imx6q-h100.dts | 1 +
arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts | 1 +
arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts | 5 +-
arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts | 1 +
arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi | 1 +
.../boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi | 4 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi | 2 +-
.../boot/dts/nxp/imx/imx6qdl-dfi-fs700-m60.dtsi | 30 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi | 1 +
arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi | 1 +
arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi | 85 ++---
arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi | 6 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi | 2 +
arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi | 2 +
arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi | 79 ++--
.../boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi | 132 +++----
.../boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi | 1 +
arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi | 121 +++---
.../boot/dts/nxp/imx/imx6qdl-phytec-pbab01.dtsi | 26 +-
.../boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi | 50 +--
.../dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi | 8 +
arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi | 58 ++-
arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi | 147 ++++----
arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi | 1 +
arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi | 1 +
arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi | 1 +
arch/arm/boot/dts/nxp/imx/imx6qdl-udoo.dtsi | 36 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi | 1 +
arch/arm/boot/dts/nxp/imx/imx6sx-nitrogen6sx.dts | 2 +-
arch/arm/boot/dts/nxp/imx/imx6sx.dtsi | 6 +-
arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi | 4 +-
.../boot/dts/nxp/imx/imx6ul-ccimx6ulsbcexpress.dts | 2 +-
.../arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcpro.dts | 6 +-
arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsom.dtsi | 1 -
arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts | 1 -
.../boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dts | 1 +
arch/arm/boot/dts/nxp/imx/imx6ul-pico-hobbit.dts | 1 +
arch/arm/boot/dts/nxp/imx/imx6ul-pico-pi.dts | 1 +
.../boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts | 2 +-
arch/arm/boot/dts/nxp/imx/imx6ul.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx6ull-colibri.dtsi | 1 -
arch/arm/boot/dts/nxp/imx/imx7-colibri.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts | 1 +
arch/arm/boot/dts/nxp/imx/imx7d-pico-nymph.dts | 1 +
arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts | 5 +
arch/arm/boot/dts/nxp/imx/imx7s.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi | 3 +-
arch/arm/boot/dts/nxp/ls/Makefile | 1 +
arch/arm/boot/dts/nxp/ls/ls1021a-iot.dts | 10 +-
.../dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts | 405 +++++++++++++++++++++
arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi | 107 ++++++
arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dts | 23 +-
arch/arm/boot/dts/nxp/mxs/imx23-stmp378x_devb.dts | 19 +-
arch/arm/boot/dts/nxp/mxs/imx23.dtsi | 21 +-
arch/arm/boot/dts/nxp/mxs/imx28-apf28dev.dts | 34 +-
arch/arm/boot/dts/nxp/mxs/imx28-cfa10037.dts | 23 +-
arch/arm/boot/dts/nxp/mxs/imx28-cfa10049.dts | 23 +-
arch/arm/boot/dts/nxp/mxs/imx28-cfa10057.dts | 23 +-
arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dts | 23 +-
.../boot/dts/nxp/mxs/imx28-eukrea-mbmx283lc.dts | 2 +-
.../boot/dts/nxp/mxs/imx28-eukrea-mbmx28lc.dtsi | 82 ++---
arch/arm/boot/dts/nxp/mxs/imx28-m28.dtsi | 19 +-
arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts | 66 ++--
arch/arm/boot/dts/nxp/mxs/imx28-m28evk.dts | 45 +--
arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts | 19 +-
arch/arm/boot/dts/nxp/mxs/imx28.dtsi | 24 +-
arch/arm/boot/dts/nxp/vf/vf610-twr.dts | 31 +-
arch/arm/boot/dts/nxp/vf/vfxxx.dtsi | 4 +-
106 files changed, 1435 insertions(+), 1191 deletions(-)
create mode 100644 arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts
create mode 100644 arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-08-13 13:35 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-13 13:33 [GIT PULL 1/6] i.MX drivers update for 6.6 Shawn Guo
2023-08-13 13:33 ` [GIT PULL 2/6] i.MX SoC change " Shawn Guo
2023-08-13 13:33 ` [GIT PULL 3/6] i.MX dt-bindings update " Shawn Guo
2023-08-13 13:33 ` Shawn Guo [this message]
2023-08-13 13:33 ` [GIT PULL 5/6] i.MX arm64 device tree chanage " Shawn Guo
2023-08-13 13:33 ` [GIT PULL 6/6] i.MX defconfig change " Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230813133354.847010-4-shawnguo@kernel.org \
--to=shawnguo@kernel.org \
--cc=arm@kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=soc@kernel.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).