[PATCH V2 6/7] arm64: dts: qcom: ipq9574: Add support for nsscc node

[Devi Priya <quic_devipriy@quicinc.com>]

Add a node for the nss clock controller found on ipq9574 based devices.

Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
---
 Changes in V2:
	- Dropped the fixed clock node gcc_gpll0_out_aux and added
	  support for the same in gcc driver
	- Updated the node name to clock-controller@39b00000
	- Added clock-names to retrieve the nssnoc clocks and add them
	  to the list of pm clocks in nss driver

 arch/arm64/boot/dts/qcom/ipq9574.dtsi | 48 +++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 51aba071c1eb..903311547e96 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -10,6 +10,8 @@
 #include <dt-bindings/clock/qcom,ipq9574-gcc.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/qcom,ipq9574-gcc.h>
+#include <dt-bindings/clock/qcom,ipq9574-nsscc.h>
+#include <dt-bindings/reset/qcom,ipq9574-nsscc.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -18,6 +20,24 @@ / {
 	#size-cells = <2>;
 
 	clocks {
+		bias_pll_cc_clk: bias-pll-cc-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <1200000000>;
+			#clock-cells = <0>;
+		};
+
+		bias_pll_nss_noc_clk: bias-pll-nss-noc-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <461500000>;
+			#clock-cells = <0>;
+		};
+
+		bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <353000000>;
+			#clock-cells = <0>;
+		};
+
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
@@ -722,6 +742,34 @@ frame@b128000 {
 				status = "disabled";
 			};
 		};
+
+		nsscc: clock-controller@39b00000 {
+			compatible = "qcom,ipq9574-nsscc";
+			reg = <0x39b00000 0x80000>;
+			clocks = <&gcc GCC_NSSNOC_NSSCC_CLK>,
+				 <&gcc GCC_NSSNOC_SNOC_CLK>,
+				 <&gcc GCC_NSSNOC_SNOC_1_CLK>,
+				 <&bias_pll_cc_clk>,
+				 <&bias_pll_nss_noc_clk>,
+				 <&bias_pll_ubi_nc_clk>,
+				 <&gcc GPLL0_OUT_AUX>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&xo_board_clk>;
+			clock-names = "nssnoc_nsscc", "nssnoc_snoc", "nssnoc_snoc_1",
+				      "bias_pll_cc_clk", "bias_pll_nss_noc_clk",
+				      "bias_pll_ubi_nc_clk", "gpll0_out_aux", "uniphy0_nss_rx_clk",
+				      "uniphy0_nss_tx_clk", "uniphy1_nss_rx_clk",
+				      "uniphy1_nss_tx_clk", "uniphy2_nss_rx_clk",
+				      "uniphy2_nss_tx_clk", "xo_board_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
 	};
 
 	thermal-zones {
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel