From: Manikandan Muralidharan <manikandan.m@microchip.com>
To: <sam@ravnborg.org>, <bbrezillon@kernel.org>, <airlied@gmail.com>,
<daniel@ffwll.ch>, <nicolas.ferre@microchip.com>,
<alexandre.belloni@bootlin.com>, <lee@kernel.org>,
<dri-devel@lists.freedesktop.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Cc: <Hari.PrasathGE@microchip.com>,
<Balamanikandan.Gunasundar@microchip.com>,
<Durai.ManickamKR@microchip.com>,
<Nayabbasha.Sayed@microchip.com>, <Dharma.B@microchip.com>,
<Varshini.Rajendran@microchip.com>,
<Balakrishnan.S@microchip.com>,
Manikandan Muralidharan <manikandan.m@microchip.com>,
Durai Manickam KR <durai.manickamkr@microchip.com>
Subject: [PATCH v4 6/8] drm: atmel-hlcdc: add DPI mode support for XLCDC
Date: Fri, 25 Aug 2023 18:24:42 +0530 [thread overview]
Message-ID: <20230825125444.93222-7-manikandan.m@microchip.com> (raw)
In-Reply-To: <20230825125444.93222-1-manikandan.m@microchip.com>
Add support for Display Pixel Interface (DPI) Compatible Mode
support in atmel-hlcdc driver for XLCDC IP along with legacy
pixel mapping.DPI mode BIT is configured in LCDC_CFG5 register.
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
[durai.manickamkr@microchip.com: update DPI mode bit using is_xlcdc flag]
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
---
.../gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 22 ++++++++++++++++---
1 file changed, 19 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
index 4b11a1de8af4..c3d0c60ba419 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
@@ -30,10 +30,12 @@
*
* @base: base CRTC state
* @output_mode: RGBXXX output mode
+ * @dpi: output DPI mode
*/
struct atmel_hlcdc_crtc_state {
struct drm_crtc_state base;
unsigned int output_mode;
+ bool dpi;
};
static inline struct atmel_hlcdc_crtc_state *
@@ -164,6 +166,8 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c)
state = drm_crtc_state_to_atmel_hlcdc_crtc_state(c->state);
cfg = state->output_mode << 8;
+ if (is_xlcdc)
+ cfg |= state->dpi << 11;
if (!is_xlcdc && (adj->flags & DRM_MODE_FLAG_NVSYNC))
cfg |= ATMEL_HLCDC_VSPOL;
@@ -176,7 +180,9 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c)
ATMEL_HLCDC_VSPDLYS | ATMEL_HLCDC_VSPDLYE |
ATMEL_HLCDC_DISPPOL | ATMEL_HLCDC_DISPDLY |
ATMEL_HLCDC_VSPSU | ATMEL_HLCDC_VSPHO |
- ATMEL_HLCDC_GUARDTIME_MASK | ATMEL_HLCDC_MODE_MASK,
+ ATMEL_HLCDC_GUARDTIME_MASK |
+ (is_xlcdc ? ATMEL_XLCDC_MODE_MASK |
+ ATMEL_XLCDC_DPI : ATMEL_HLCDC_MODE_MASK),
cfg);
clk_disable_unprepare(crtc->dc->hlcdc->sys_clk);
@@ -366,7 +372,15 @@ static int atmel_hlcdc_crtc_select_output_mode(struct drm_crtc_state *state)
hstate = drm_crtc_state_to_atmel_hlcdc_crtc_state(state);
hstate->output_mode = fls(output_fmts) - 1;
-
+ if (crtc->dc->desc->is_xlcdc) {
+ /* check if MIPI DPI bit needs to be set */
+ if (fls(output_fmts) > 3) {
+ hstate->output_mode -= 4;
+ hstate->dpi = true;
+ } else {
+ hstate->dpi = false;
+ }
+ }
return 0;
}
@@ -470,7 +484,7 @@ static struct drm_crtc_state *
atmel_hlcdc_crtc_duplicate_state(struct drm_crtc *crtc)
{
struct atmel_hlcdc_crtc_state *state, *cur;
-
+ struct atmel_hlcdc_crtc *c = drm_crtc_to_atmel_hlcdc_crtc(crtc);
if (WARN_ON(!crtc->state))
return NULL;
@@ -481,6 +495,8 @@ atmel_hlcdc_crtc_duplicate_state(struct drm_crtc *crtc)
cur = drm_crtc_state_to_atmel_hlcdc_crtc_state(crtc->state);
state->output_mode = cur->output_mode;
+ if (c->dc->desc->is_xlcdc)
+ state->dpi = cur->dpi;
return &state->base;
}
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-08-25 12:56 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-25 12:54 [PATCH v4 0/8] Add support for XLCDC to sam9x7 SoC family Manikandan Muralidharan
2023-08-25 12:54 ` [PATCH v4 1/8] mfd: atmel-hlcdc: Add compatible for sam9x75 XLCD controller Manikandan Muralidharan
2023-08-25 12:54 ` [PATCH v4 2/8] drm: atmel-hlcdc: add flag to differentiate XLCDC and HLCDC IP Manikandan Muralidharan
2023-08-25 12:54 ` [PATCH v4 3/8] drm: atmel-hlcdc: add LCD controller layer definition for sam9x75 Manikandan Muralidharan
2023-08-25 12:54 ` [PATCH v4 4/8] drm: atmel-hlcdc: Define SAM9X7 SoC XLCDC specific registers Manikandan Muralidharan
2023-09-09 15:50 ` claudiu beznea
2023-08-25 12:54 ` [PATCH v4 5/8] drm: atmel_hlcdc: Add support for XLCDC in atmel LCD driver Manikandan Muralidharan
2023-09-09 16:20 ` claudiu beznea
2023-09-12 10:44 ` Manikandan.M
2023-09-18 4:30 ` claudiu beznea
2023-08-25 12:54 ` Manikandan Muralidharan [this message]
2023-09-09 16:25 ` [PATCH v4 6/8] drm: atmel-hlcdc: add DPI mode support for XLCDC claudiu beznea
2023-08-25 12:54 ` [PATCH v4 7/8] drm: atmel-hlcdc: add vertical and horizontal scaling " Manikandan Muralidharan
2023-09-09 16:26 ` claudiu beznea
2023-08-25 12:54 ` [PATCH v4 8/8] drm: atmel-hlcdc: add support for DSI output formats Manikandan Muralidharan
2023-09-09 16:32 ` claudiu beznea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230825125444.93222-7-manikandan.m@microchip.com \
--to=manikandan.m@microchip.com \
--cc=Balakrishnan.S@microchip.com \
--cc=Balamanikandan.Gunasundar@microchip.com \
--cc=Dharma.B@microchip.com \
--cc=Durai.ManickamKR@microchip.com \
--cc=Hari.PrasathGE@microchip.com \
--cc=Nayabbasha.Sayed@microchip.com \
--cc=Varshini.Rajendran@microchip.com \
--cc=airlied@gmail.com \
--cc=alexandre.belloni@bootlin.com \
--cc=bbrezillon@kernel.org \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=sam@ravnborg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).