From: Manikandan Muralidharan <manikandan.m@microchip.com>
To: <sam@ravnborg.org>, <bbrezillon@kernel.org>, <airlied@gmail.com>,
<daniel@ffwll.ch>, <nicolas.ferre@microchip.com>,
<alexandre.belloni@bootlin.com>, <lee@kernel.org>,
<dri-devel@lists.freedesktop.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Cc: <Hari.PrasathGE@microchip.com>,
<Balamanikandan.Gunasundar@microchip.com>,
<Durai.ManickamKR@microchip.com>,
<Nayabbasha.Sayed@microchip.com>, <Dharma.B@microchip.com>,
<Varshini.Rajendran@microchip.com>,
<Balakrishnan.S@microchip.com>,
Manikandan Muralidharan <manikandan.m@microchip.com>
Subject: [PATCH v4 7/8] drm: atmel-hlcdc: add vertical and horizontal scaling support for XLCDC
Date: Fri, 25 Aug 2023 18:24:43 +0530 [thread overview]
Message-ID: <20230825125444.93222-8-manikandan.m@microchip.com> (raw)
In-Reply-To: <20230825125444.93222-1-manikandan.m@microchip.com>
update the LCDC_HEOCFG30 and LCDC_HEOCFG31 registers of XLCDC IP which
supports vertical and horizontal scaling with Bilinear and Bicubic
co-efficients taps for Chroma and Luma componenets of the Pixel.
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
---
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c | 2 ++
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h | 4 ++++
.../gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 20 +++++++++++++++++++
3 files changed, 26 insertions(+)
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
index d30aec174aa2..ae3e1a813482 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
@@ -536,6 +536,8 @@ static const struct atmel_hlcdc_layer_desc atmel_xlcdc_sam9x75_layers[] = {
.general_config = 12,
.csc = 16,
.scaler_config = 23,
+ .vxs_config = 30,
+ .hxs_config = 31,
},
.clut_offset = 0x1300,
},
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
index 8b05a54b5fd0..27074a4c5aec 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
@@ -198,6 +198,8 @@
* @disc_pos: discard area position register
* @disc_size: discard area size register
* @csc: color space conversion register
+ * @vxs_config: vertical scalar filter taps control register
+ * @hxs_config: horizontal scalar filter taps control register
*/
struct atmel_hlcdc_layer_cfg_layout {
int xstride[ATMEL_HLCDC_LAYER_MAX_PLANES];
@@ -217,6 +219,8 @@ struct atmel_hlcdc_layer_cfg_layout {
int disc_pos;
int disc_size;
int csc;
+ int vxs_config;
+ int hxs_config;
};
/**
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
index 26caf4cddfa4..a06ae2dc5909 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
@@ -972,6 +972,26 @@ static void xlcdc_csc_init(struct atmel_hlcdc_plane *plane,
atmel_hlcdc_layer_write_cfg(&plane->layer,
desc->layout.csc + i,
xlcdc_csc_coeffs[i]);
+
+ if (desc->layout.vxs_config && desc->layout.hxs_config) {
+ /*
+ * Updating vxs.config and hxs.config fixes the
+ * Green Color Issue in SAM9X7 EGT Video Player App
+ */
+ atmel_hlcdc_layer_write_cfg(&plane->layer,
+ desc->layout.vxs_config,
+ ATMEL_XLCDC_LAYER_VXSYCFG_ONE |
+ ATMEL_XLCDC_LAYER_VXSYTAP2_ENABLE |
+ ATMEL_XLCDC_LAYER_VXSCCFG_ONE |
+ ATMEL_XLCDC_LAYER_VXSCTAP2_ENABLE);
+
+ atmel_hlcdc_layer_write_cfg(&plane->layer,
+ desc->layout.hxs_config,
+ ATMEL_XLCDC_LAYER_HXSYCFG_ONE |
+ ATMEL_XLCDC_LAYER_HXSYTAP2_ENABLE |
+ ATMEL_XLCDC_LAYER_HXSCCFG_ONE |
+ ATMEL_XLCDC_LAYER_HXSCTAP2_ENABLE);
+ }
}
static int atmel_hlcdc_plane_init_properties(struct atmel_hlcdc_plane *plane)
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-08-25 12:56 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-25 12:54 [PATCH v4 0/8] Add support for XLCDC to sam9x7 SoC family Manikandan Muralidharan
2023-08-25 12:54 ` [PATCH v4 1/8] mfd: atmel-hlcdc: Add compatible for sam9x75 XLCD controller Manikandan Muralidharan
2023-08-25 12:54 ` [PATCH v4 2/8] drm: atmel-hlcdc: add flag to differentiate XLCDC and HLCDC IP Manikandan Muralidharan
2023-08-25 12:54 ` [PATCH v4 3/8] drm: atmel-hlcdc: add LCD controller layer definition for sam9x75 Manikandan Muralidharan
2023-08-25 12:54 ` [PATCH v4 4/8] drm: atmel-hlcdc: Define SAM9X7 SoC XLCDC specific registers Manikandan Muralidharan
2023-09-09 15:50 ` claudiu beznea
2023-08-25 12:54 ` [PATCH v4 5/8] drm: atmel_hlcdc: Add support for XLCDC in atmel LCD driver Manikandan Muralidharan
2023-09-09 16:20 ` claudiu beznea
2023-09-12 10:44 ` Manikandan.M
2023-09-18 4:30 ` claudiu beznea
2023-08-25 12:54 ` [PATCH v4 6/8] drm: atmel-hlcdc: add DPI mode support for XLCDC Manikandan Muralidharan
2023-09-09 16:25 ` claudiu beznea
2023-08-25 12:54 ` Manikandan Muralidharan [this message]
2023-09-09 16:26 ` [PATCH v4 7/8] drm: atmel-hlcdc: add vertical and horizontal scaling " claudiu beznea
2023-08-25 12:54 ` [PATCH v4 8/8] drm: atmel-hlcdc: add support for DSI output formats Manikandan Muralidharan
2023-09-09 16:32 ` claudiu beznea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230825125444.93222-8-manikandan.m@microchip.com \
--to=manikandan.m@microchip.com \
--cc=Balakrishnan.S@microchip.com \
--cc=Balamanikandan.Gunasundar@microchip.com \
--cc=Dharma.B@microchip.com \
--cc=Durai.ManickamKR@microchip.com \
--cc=Hari.PrasathGE@microchip.com \
--cc=Nayabbasha.Sayed@microchip.com \
--cc=Varshini.Rajendran@microchip.com \
--cc=airlied@gmail.com \
--cc=alexandre.belloni@bootlin.com \
--cc=bbrezillon@kernel.org \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=sam@ravnborg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).