From: Steven Rostedt <rostedt@goodmis.org>
To: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Cc: <mhiramat@kernel.org>, <bobule.chang@mediatek.com>,
<wsd_upstream@mediatek.com>, <cheng-jui.wang@mediatek.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
<linux-kernel@vger.kernel.org>,
<linux-trace-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>
Subject: Re: [PATCH] ring-buffer: Do not read at &event->array[0] if it across the page
Date: Tue, 5 Sep 2023 12:39:53 -0400 [thread overview]
Message-ID: <20230905123953.3c0b3d7a@gandalf.local.home> (raw)
In-Reply-To: <20230905141245.26470-1-Tze-nan.Wu@mediatek.com>
On Tue, 5 Sep 2023 22:12:45 +0800
Tze-nan Wu <Tze-nan.Wu@mediatek.com> wrote:
> While reading from the tracing/trace, the ftrace reader rarely encounters
> a KASAN invalid access issue.
> It is likely that the writer has disrupted the ring_buffer that the reader
> is currently parsing. the kasan report is as below:
What kernel are you using? There's been recent fixes that handle the race
between reading the last entry and the writer adding to it. This looks like
you may have hit that bug.
>
> [name:report&]BUG: KASAN: invalid-access in rb_iter_head_event+0x27c/0x3d0
> [name:report&]Read of size 4 at addr 71ffff8111a18000 by task xxxx
> [name:report_sw_tags&]Pointer tag: [71], memory tag: [0f]
> [name:report&]
> CPU: 2 PID: 380 Comm: xxxx
> Call trace:
> dump_backtrace+0x168/0x1b0
> show_stack+0x2c/0x3c
> dump_stack_lvl+0xa4/0xd4
> print_report+0x268/0x9b0
> kasan_report+0xdc/0x148
> kasan_tag_mismatch+0x28/0x3c
> __hwasan_tag_mismatch+0x2c/0x58
> rb_event_length() [inline]
> rb_iter_head_event+0x27c/0x3d0
> ring_buffer_iter_peek+0x23c/0x6e0
> __find_next_entry+0x1ac/0x3d8
> s_next+0x1f0/0x310
> seq_read_iter+0x4e8/0x77c
> seq_read+0xf8/0x150
> vfs_read+0x1a8/0x4cc
>
> In some edge cases, ftrace reader could access to an invalid address,
> specifically when reading 4 bytes beyond the end of the currently page.
> While issue happened, the dump of rb_iter_head_event is shown as below:
>
> in function rb_iter_head_event:
> - iter->head = 0xFEC
> - iter->next_event = 0xFEC
> - commit = 0xFF0
> - read_stamp = 0x2955AC46DB0
> - page_stamp = 0x2955AC2439A
> - iter->head_page->page = 0x71FFFF8111A17000
> - iter->head_page->time_stamp = 0x2956A142267
> - iter->head_page->page->commit = 0xFF0
> - the content in iter->head_page->page
> 0x71FFFF8111A17FF0: 01010075 00002421 0A123B7C FFFFFFC0
>
> In rb_iter_head_event, reader will call rb_event_length with argument
> (struct ring_buffer_event *event = 0x71FFFF8111A17FFC).
As the commit is considered the end of buffer, it should never read past
that, which the above appears to be doing. That's why I think it hit that
race.
> Since the content data start at address 0x71FFFF8111A17FFC are 0xFFFFFFC0.
> event->type will be interpret as 0x0, than the reader will try to get the
> length by accessing event->array[0], which is an invalid address:
> &event->array[0] = 0x71FFFF8111A18000
>
> Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
> ---
> Following patch may not become a solution, it merely checks if the address
> to be accessed is valid or not within the rb_event_length before access.
> And not sure if there is any side-effect it can lead to.
>
> I am curious about what a better solution for this issue would look like.
> Should we address the problem from the writer or the reader?
>
> Also I wonder if the cause of the issue is exactly as I suspected.
> Any Suggestion will be appreciated.
I guess this depends on if you have the fixes or not?
>
> Test below can reproduce the issue in 2 hours on kernel-6.1.24:
> $cd /sys/kernel/tracing/
> # make the reader and writer race more through resize the buffer to 8kb
> $echo 8 > buffer_size_kn
> # enable all events
> $echo 1 > event/enable
> # enable trace
> $echo 1 > tracing_on
>
> # write and run a script that keep reading trace
> $./read_trace.sh
>
> ``` read_trace.sh
> while :
> do
> cat /sys/kernel/tracing/trace > /dev/null
> done
>
> ```
Thanks, I'll look at that when I finish debugging the eventfs bug.
-- Steve
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-09-05 16:40 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-05 14:12 [PATCH] ring-buffer: Do not read at &event->array[0] if it across the page Tze-nan Wu
2023-09-05 16:39 ` Steven Rostedt [this message]
[not found] ` <3a89d49ae0da6378de83bc68690cf6664d97cb24.camel@mediatek.com>
[not found] ` <0944a5f3e10c0eba8b32e51fb941e0dd98ec086d.camel@mediatek.com>
2023-09-07 12:14 ` Steven Rostedt
-- strict thread matches above, loose matches on Subject: below --
2023-09-05 14:23 Tze-nan Wu
2023-09-05 16:41 ` Steven Rostedt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230905123953.3c0b3d7a@gandalf.local.home \
--to=rostedt@goodmis.org \
--cc=Tze-nan.Wu@mediatek.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=bobule.chang@mediatek.com \
--cc=cheng-jui.wang@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-trace-kernel@vger.kernel.org \
--cc=mhiramat@kernel.org \
--cc=wsd_upstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox