linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Jernej Skrabec <jernej.skrabec@gmail.com>
To: joro@8bytes.org, will@kernel.org, robin.murphy@arm.com
Cc: wens@csie.org, samuel@sholland.org, iommu@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
	Jernej Skrabec <jernej.skrabec@gmail.com>
Subject: [PATCH] iommu/sun50i: Convert to map_pages/unmap_pages
Date: Tue, 12 Sep 2023 20:19:41 +0200	[thread overview]
Message-ID: <20230912181941.2971036-1-jernej.skrabec@gmail.com> (raw)

Convert driver to use map_pages and unmap_pages. Since functions operate
on page table, extend them to be able to operate on whole table, not
just one entry.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
---
Hi!

I'm not sure if it makes sense to check validity of page table entry when
unmaping pages makes sense. What do you think?

Best regards,
Jernej

 drivers/iommu/sun50i-iommu.c | 55 +++++++++++++++++++++---------------
 1 file changed, 33 insertions(+), 22 deletions(-)

diff --git a/drivers/iommu/sun50i-iommu.c b/drivers/iommu/sun50i-iommu.c
index 74c5cb93e900..be6102730a56 100644
--- a/drivers/iommu/sun50i-iommu.c
+++ b/drivers/iommu/sun50i-iommu.c
@@ -589,11 +589,12 @@ static u32 *sun50i_dte_get_page_table(struct sun50i_iommu_domain *sun50i_domain,
 }
 
 static int sun50i_iommu_map(struct iommu_domain *domain, unsigned long iova,
-			    phys_addr_t paddr, size_t size, int prot, gfp_t gfp)
+			    phys_addr_t paddr, size_t pgsize, size_t pgcount,
+			    int prot, gfp_t gfp, size_t *mapped)
 {
 	struct sun50i_iommu_domain *sun50i_domain = to_sun50i_domain(domain);
 	struct sun50i_iommu *iommu = sun50i_domain->iommu;
-	u32 pte_index;
+	u32 pte_index, count, i;
 	u32 *page_table, *pte_addr;
 	int ret = 0;
 
@@ -604,45 +605,55 @@ static int sun50i_iommu_map(struct iommu_domain *domain, unsigned long iova,
 	}
 
 	pte_index = sun50i_iova_get_pte_index(iova);
-	pte_addr = &page_table[pte_index];
-	if (unlikely(sun50i_pte_is_page_valid(*pte_addr))) {
-		phys_addr_t page_phys = sun50i_pte_get_page_address(*pte_addr);
-		dev_err(iommu->dev,
-			"iova %pad already mapped to %pa cannot remap to %pa prot: %#x\n",
-			&iova, &page_phys, &paddr, prot);
-		ret = -EBUSY;
-		goto out;
+	count = min(pgcount, (size_t)NUM_PT_ENTRIES - pte_index);
+	for (i = 0; i < count; i++) {
+		pte_addr = &page_table[pte_index + i];
+		if (unlikely(sun50i_pte_is_page_valid(*pte_addr))) {
+			phys_addr_t page_phys = sun50i_pte_get_page_address(*pte_addr);
+
+			dev_err(iommu->dev,
+				"iova %pad already mapped to %pa cannot remap to %pa prot: %#x\n",
+				&iova, &page_phys, &paddr, prot);
+			ret = -EBUSY;
+			goto out;
+		}
+		*pte_addr = sun50i_mk_pte(paddr, prot);
+		paddr += SPAGE_SIZE;
 	}
 
-	*pte_addr = sun50i_mk_pte(paddr, prot);
-	sun50i_table_flush(sun50i_domain, pte_addr, 1);
+	sun50i_table_flush(sun50i_domain, &page_table[pte_index], i);
+	*mapped = i * SPAGE_SIZE;
 
 out:
 	return ret;
 }
 
 static size_t sun50i_iommu_unmap(struct iommu_domain *domain, unsigned long iova,
-				 size_t size, struct iommu_iotlb_gather *gather)
+				 size_t pgsize, size_t pgcount,
+				 struct iommu_iotlb_gather *gather)
 {
 	struct sun50i_iommu_domain *sun50i_domain = to_sun50i_domain(domain);
+	u32 dte, count, i, pte_index;
 	phys_addr_t pt_phys;
 	u32 *pte_addr;
-	u32 dte;
 
 	dte = sun50i_domain->dt[sun50i_iova_get_dte_index(iova)];
 	if (!sun50i_dte_is_pt_valid(dte))
 		return 0;
 
 	pt_phys = sun50i_dte_get_pt_address(dte);
-	pte_addr = (u32 *)phys_to_virt(pt_phys) + sun50i_iova_get_pte_index(iova);
+	pte_index = sun50i_iova_get_pte_index(iova);
+	pte_addr = (u32 *)phys_to_virt(pt_phys) + pte_index;
 
-	if (!sun50i_pte_is_page_valid(*pte_addr))
-		return 0;
+	count = min(pgcount, (size_t)NUM_PT_ENTRIES - pte_index);
+	for (i = 0; i < count; i++)
+		if (!sun50i_pte_is_page_valid(pte_addr[i]))
+			break;
 
-	memset(pte_addr, 0, sizeof(*pte_addr));
-	sun50i_table_flush(sun50i_domain, pte_addr, 1);
+	memset(pte_addr, 0, sizeof(*pte_addr) * i);
+	sun50i_table_flush(sun50i_domain, pte_addr, i);
 
-	return SZ_4K;
+	return i * SPAGE_SIZE;
 }
 
 static phys_addr_t sun50i_iommu_iova_to_phys(struct iommu_domain *domain,
@@ -838,8 +849,8 @@ static const struct iommu_ops sun50i_iommu_ops = {
 		.iotlb_sync_map = sun50i_iommu_iotlb_sync_map,
 		.iotlb_sync	= sun50i_iommu_iotlb_sync,
 		.iova_to_phys	= sun50i_iommu_iova_to_phys,
-		.map		= sun50i_iommu_map,
-		.unmap		= sun50i_iommu_unmap,
+		.map_pages	= sun50i_iommu_map,
+		.unmap_pages	= sun50i_iommu_unmap,
 		.free		= sun50i_iommu_domain_free,
 	}
 };
-- 
2.42.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2023-09-12 18:20 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-12 18:19 Jernej Skrabec [this message]
2023-09-13 20:20 ` [PATCH] iommu/sun50i: Convert to map_pages/unmap_pages Robin Murphy
2023-09-14 15:09   ` Jernej Škrabec
2023-09-25 16:19 ` Robin Murphy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230912181941.2971036-1-jernej.skrabec@gmail.com \
    --to=jernej.skrabec@gmail.com \
    --cc=iommu@lists.linux.dev \
    --cc=joro@8bytes.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=robin.murphy@arm.com \
    --cc=samuel@sholland.org \
    --cc=wens@csie.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).