linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Ulf Hansson <ulf.hansson@linaro.org>
To: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>,
	linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Nishanth Menon <nm@ti.com>,
	Santosh Shilimkar <ssantosh@kernel.org>,
	Tero Kristo <kristo@kernel.org>, Tony Lindgren <tony@atomide.com>
Subject: [PATCH v2 16/17] pmdomain: ti: Move and add Kconfig options to the pmdomain subsystem
Date: Fri, 15 Sep 2023 11:20:02 +0200	[thread overview]
Message-ID: <20230915092003.658361-17-ulf.hansson@linaro.org> (raw)
In-Reply-To: <20230915092003.658361-1-ulf.hansson@linaro.org>

The TI_SCI_PM_DOMAINS Kconfig option belongs closer to its corresponding
implementation, hence let's move it from the soc subsystem to the pmdomain
subsystem.

While at it, let's also add a Kconfig option the omap_prm driver, rather
than using ARCH_OMAP2PLUS directly.

Cc: Nishanth Menon <nm@ti.com>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: Tero Kristo <kristo@kernel.org>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
 drivers/pmdomain/Kconfig     |  1 +
 drivers/pmdomain/ti/Kconfig  | 22 ++++++++++++++++++++++
 drivers/pmdomain/ti/Makefile |  2 +-
 drivers/soc/ti/Kconfig       | 12 ------------
 4 files changed, 24 insertions(+), 13 deletions(-)
 create mode 100644 drivers/pmdomain/ti/Kconfig

diff --git a/drivers/pmdomain/Kconfig b/drivers/pmdomain/Kconfig
index 98e04589bef4..33bfec9c4f7a 100644
--- a/drivers/pmdomain/Kconfig
+++ b/drivers/pmdomain/Kconfig
@@ -15,5 +15,6 @@ source "drivers/pmdomain/st/Kconfig"
 source "drivers/pmdomain/starfive/Kconfig"
 source "drivers/pmdomain/sunxi/Kconfig"
 source "drivers/pmdomain/tegra/Kconfig"
+source "drivers/pmdomain/ti/Kconfig"
 
 endmenu
diff --git a/drivers/pmdomain/ti/Kconfig b/drivers/pmdomain/ti/Kconfig
new file mode 100644
index 000000000000..67c608bf7ed0
--- /dev/null
+++ b/drivers/pmdomain/ti/Kconfig
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config OMAP2PLUS_PRM
+	bool
+	depends on ARCH_OMAP2PLUS
+	default ARCH_OMAP2PLUS
+
+if SOC_TI
+
+config TI_SCI_PM_DOMAINS
+	tristate "TI SCI PM Domains Driver"
+	depends on TI_SCI_PROTOCOL
+	depends on PM_GENERIC_DOMAINS
+	help
+	  Generic power domain implementation for TI device implementing
+	  the TI SCI protocol.
+
+	  To compile this as a module, choose M here. The module will be
+	  called ti_sci_pm_domains. Note this is needed early in boot before
+	  rootfs may be available.
+
+endif
diff --git a/drivers/pmdomain/ti/Makefile b/drivers/pmdomain/ti/Makefile
index 69580afbb436..af6cd056c158 100644
--- a/drivers/pmdomain/ti/Makefile
+++ b/drivers/pmdomain/ti/Makefile
@@ -1,3 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_ARCH_OMAP2PLUS)		+= omap_prm.o
+obj-$(CONFIG_OMAP2PLUS_PRM)		+= omap_prm.o
 obj-$(CONFIG_TI_SCI_PM_DOMAINS)		+= ti_sci_pm_domains.o
diff --git a/drivers/soc/ti/Kconfig b/drivers/soc/ti/Kconfig
index 2cae17b65fd9..1a93001c9e36 100644
--- a/drivers/soc/ti/Kconfig
+++ b/drivers/soc/ti/Kconfig
@@ -50,18 +50,6 @@ config WKUP_M3_IPC
 	  to communicate and use the Wakeup M3 for PM features like suspend
 	  resume and boots it using wkup_m3_rproc driver.
 
-config TI_SCI_PM_DOMAINS
-	tristate "TI SCI PM Domains Driver"
-	depends on TI_SCI_PROTOCOL
-	depends on PM_GENERIC_DOMAINS
-	help
-	  Generic power domain implementation for TI device implementing
-	  the TI SCI protocol.
-
-	  To compile this as a module, choose M here. The module will be
-	  called ti_sci_pm_domains. Note this is needed early in boot before
-	  rootfs may be available.
-
 config TI_K3_RINGACC
 	tristate "K3 Ring accelerator Sub System"
 	depends on ARCH_K3 || COMPILE_TEST
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2023-09-15  9:22 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-15  9:19 [PATCH v2 00/17] pmdomain: Move Kconfig options/files to the pmdomain subsystem Ulf Hansson
2023-09-15  9:19 ` [PATCH v2 01/17] pmdomain: Prepare to move Kconfig files into " Ulf Hansson
2023-09-15 10:07   ` Geert Uytterhoeven
2023-09-15  9:19 ` [PATCH v2 02/17] pmdomain: actions: Move Kconfig file to " Ulf Hansson
2023-09-15  9:19 ` [PATCH v2 03/17] pmdomain: amlogic: Move Kconfig options " Ulf Hansson
2023-09-15  9:19 ` [PATCH v2 04/17] pmdomain: apple: Move Kconfig option " Ulf Hansson
2023-09-15  9:45   ` Eric Curtin
2023-09-15 11:46     ` Ulf Hansson
2023-09-15 10:21   ` Neal Gompa
2023-09-15  9:19 ` [PATCH v2 05/17] pmdomain: bcm: Move Kconfig options " Ulf Hansson
2023-09-15 13:15   ` Philippe Mathieu-Daudé
2023-09-15 16:30   ` Florian Fainelli
2023-09-15  9:19 ` [PATCH v2 06/17] pmdomain: imx: " Ulf Hansson
2023-09-17 23:07   ` Peng Fan
2023-09-15  9:19 ` [PATCH v2 07/17] pmdomain: mediatek: " Ulf Hansson
2023-09-15  9:19 ` [PATCH v2 08/17] pmdomain: qcom: " Ulf Hansson
2023-09-15  9:19 ` [PATCH v2 09/17] pmdomain: renesas: " Ulf Hansson
2023-09-15  9:19 ` [PATCH v2 10/17] pmdomain: rockchip: Move Kconfig option " Ulf Hansson
2023-09-15  9:19 ` [PATCH v2 11/17] pmdomain: samsung: " Ulf Hansson
2023-09-15  9:19 ` [PATCH v2 12/17] pmdomain: st: Add a Kconfig option for the ux500 power domain Ulf Hansson
2023-09-15  9:19 ` [PATCH v2 13/17] pmdomain: starfive: Move Kconfig file to the pmdomain subsystem Ulf Hansson
2023-09-15  9:29   ` Conor Dooley
2023-09-15 11:42     ` Ulf Hansson
2023-09-15  9:20 ` [PATCH v2 14/17] pmdomain: sunxi: Move Kconfig option " Ulf Hansson
2023-09-15  9:20 ` [PATCH v2 15/17] pmdomain: tegra: " Ulf Hansson
2023-09-15  9:20 ` Ulf Hansson [this message]
2023-09-19  9:09   ` [PATCH v2 16/17] pmdomain: ti: Move and add Kconfig options " Dhruva Gole
2023-09-15  9:20 ` [PATCH v2 17/17] pmdomain: xilinx: Move Kconfig option " Ulf Hansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230915092003.658361-17-ulf.hansson@linaro.org \
    --to=ulf.hansson@linaro.org \
    --cc=arnd@arndb.de \
    --cc=kristo@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=olof@lixom.net \
    --cc=ssantosh@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).