[PATCH v2 00/11] Support IGT in display driver

[PATCH v2 00/11] Support IGT in display driver

[Hsiao Chien Sung]

This series adds support for running IGT (Intel GPU Tool) tests
with MediaTek display driver. The following changes will be
applied:

1. Add a new API for creating GCE thread loop to retrieve CRCs
   from the hardware component
2. Support hardware CRC calculation in both VDOSYS0 and VDOSYS1
3. Support alpha blending in both VDOSYS0 and VDOSYS1

Changes in v2:
- Simplify CMDQ by adding commands that are currently used only
- Integrate CRC related codes into new APIs for Mixer and OVL to reuse
- Add CPU version CRC retrieval when CMDQ is disabled

Hsiao Chien Sung (11):
  soc: mediatek: Add register definitions for GCE
  soc: mediatek: Support GCE jump to absolute
  soc: mediatek: Disable 9-bit alpha in ETHDR
  drm/mediatek: Add OVL compatible name for MT8195
  drm/mediatek: Adjust DRM mode configs for IGT
  drm/mediatek: Support alpha blending in display driver
  drm/mediatek: Support alpha blending in VDOSYS0
  drm/mediatek: Support alpha blending in VDOSYS1
  drm/mediatek: Support CRC in display driver
  drm/mediatek: Support CRC in VDOSYS0
  drm/mediatek: Support CRC in VDOSYS1

 drivers/gpu/drm/mediatek/mtk_disp_drv.h       |   6 +
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c       | 309 ++++++++++++++++--
 .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c   |  21 ++
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c       | 258 ++++++++++++++-
 drivers/gpu/drm/mediatek/mtk_drm_crtc.h       |  39 +++
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c   |   6 +
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h   |  35 ++
 drivers/gpu/drm/mediatek/mtk_drm_drv.c        |  12 +-
 drivers/gpu/drm/mediatek/mtk_drm_plane.c      |  11 +
 drivers/gpu/drm/mediatek/mtk_ethdr.c          | 121 ++++++-
 drivers/gpu/drm/mediatek/mtk_ethdr.h          |   5 +
 drivers/soc/mediatek/mtk-cmdq-helper.c        |  16 +
 drivers/soc/mediatek/mtk-mmsys.c              |   1 +
 include/linux/soc/mediatek/mtk-cmdq.h         |  12 +
 14 files changed, 806 insertions(+), 46 deletions(-)

--
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 01/11] soc: mediatek: Add register definitions for GCE

[Hsiao Chien Sung]

Add register definitions for GCE so users can use them
as a buffer to store data.

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 include/linux/soc/mediatek/mtk-cmdq.h | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 649955d2cf5c..a253c001c861 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -14,6 +14,16 @@
 #define CMDQ_ADDR_HIGH(addr)	((u32)(((addr) >> 16) & GENMASK(31, 0)))
 #define CMDQ_ADDR_LOW(addr)	((u16)(addr) | BIT(1))
 
+/*
+ * Every cmdq thread has its own SPRs (Specific Purpose Registers),
+ * so there are 4 * 24 (threads) = 96 SPRs in GCE that shares the
+ * same indexes below
+ */
+#define CMDQ_THR_SPR_IDX0	(0)
+#define CMDQ_THR_SPR_IDX1	(1)
+#define CMDQ_THR_SPR_IDX2	(2)
+#define CMDQ_THR_SPR_IDX3	(3)
+
 struct cmdq_pkt;
 
 struct cmdq_client_reg {
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 01/11] soc: mediatek: Add register definitions for GCE

[AngeloGioacchino Del Regno]

Il 18/09/23 10:41, Hsiao Chien Sung ha scritto:
> Add register definitions for GCE so users can use them
> as a buffer to store data.
> 
> Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 02/11] soc: mediatek: Support GCE jump to absolute

[Hsiao Chien Sung]

Add a new API to jump to the head of cmdq packet by
appending a jump command at the end of it.

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c | 16 ++++++++++++++++
 include/linux/soc/mediatek/mtk-cmdq.h  |  2 ++
 2 files changed, 18 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index b0cd071c4719..e029ce231df1 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -441,4 +441,20 @@ int cmdq_pkt_flush_async(struct cmdq_pkt *pkt)
 }
 EXPORT_SYMBOL(cmdq_pkt_flush_async);
 
+int cmdq_pkt_jump_absolute(struct cmdq_pkt *pkt)
+{
+	struct cmdq_instruction inst = { 0 };
+	u8 shift_pa;
+
+	shift_pa = cmdq_get_shift_pa(((struct cmdq_client *)pkt->cl)->chan);
+
+	/* jump to head of the packet */
+	inst.op = CMDQ_CODE_JUMP;
+	inst.offset = CMDQ_JUMP_RELATIVE;
+	inst.value = pkt->pa_base >> shift_pa;
+
+	return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_jump_absolute);
+
 MODULE_LICENSE("GPL v2");
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index a253c001c861..106988cc5f01 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -276,6 +276,8 @@ int cmdq_pkt_jump(struct cmdq_pkt *pkt, dma_addr_t addr);
  */
 int cmdq_pkt_finalize(struct cmdq_pkt *pkt);
 
+int cmdq_pkt_jump_absolute(struct cmdq_pkt *pkt);
+
 /**
  * cmdq_pkt_flush_async() - trigger CMDQ to asynchronously execute the CMDQ
  *                          packet and call back at the end of done packet
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 02/11] soc: mediatek: Support GCE jump to absolute

[CK Hu (胡俊光)]

Hi, Hsiao-chien:

On Mon, 2023-09-18 at 16:41 +0800, Hsiao Chien Sung wrote:
> Add a new API to jump to the head of cmdq packet by
> appending a jump command at the end of it.
> 
> Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
> ---
>  drivers/soc/mediatek/mtk-cmdq-helper.c | 16 ++++++++++++++++
>  include/linux/soc/mediatek/mtk-cmdq.h  |  2 ++
>  2 files changed, 18 insertions(+)
> 
> diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c
> b/drivers/soc/mediatek/mtk-cmdq-helper.c
> index b0cd071c4719..e029ce231df1 100644
> --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> @@ -441,4 +441,20 @@ int cmdq_pkt_flush_async(struct cmdq_pkt *pkt)
>  }
>  EXPORT_SYMBOL(cmdq_pkt_flush_async);
>  
> +int cmdq_pkt_jump_absolute(struct cmdq_pkt *pkt)

CMDQ provide ability to jump to any physical address, but this
interface limit the jump to head of packet. So I would like the
interface to be

int cmdq_pkt_jump_absolute(struct cmdq_pkt *pkt, dma_addr_t pa);

For client driver, it could jump to anywhere it want.

Regards,
CK


> +{
> +	struct cmdq_instruction inst = { 0 };
> +	u8 shift_pa;
> +
> +	shift_pa = cmdq_get_shift_pa(((struct cmdq_client *)pkt->cl)-
> >chan);
> +
> +	/* jump to head of the packet */
> +	inst.op = CMDQ_CODE_JUMP;
> +	inst.offset = CMDQ_JUMP_RELATIVE;
> +	inst.value = pkt->pa_base >> shift_pa;
> +
> +	return cmdq_pkt_append_command(pkt, inst);
> +}
> +EXPORT_SYMBOL(cmdq_pkt_jump_absolute);
> +
>  MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/soc/mediatek/mtk-cmdq.h
> b/include/linux/soc/mediatek/mtk-cmdq.h
> index a253c001c861..106988cc5f01 100644
> --- a/include/linux/soc/mediatek/mtk-cmdq.h
> +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> @@ -276,6 +276,8 @@ int cmdq_pkt_jump(struct cmdq_pkt *pkt,
> dma_addr_t addr);
>   */
>  int cmdq_pkt_finalize(struct cmdq_pkt *pkt);
>  
> +int cmdq_pkt_jump_absolute(struct cmdq_pkt *pkt);
> +
>  /**
>   * cmdq_pkt_flush_async() - trigger CMDQ to asynchronously execute
> the CMDQ
>   *                          packet and call back at the end of done
> packet
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 03/11] soc: mediatek: Disable 9-bit alpha in ETHDR

[Hsiao Chien Sung]

ETHDR 9-bit alpha should be disabled by default,
otherwise alpha blending will not work.

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 drivers/soc/mediatek/mtk-mmsys.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
index ffb75711a1da..8b6c39b5d1b4 100644
--- a/drivers/soc/mediatek/mtk-mmsys.c
+++ b/drivers/soc/mediatek/mtk-mmsys.c
@@ -209,6 +209,7 @@ void mtk_mmsys_mixer_in_config(struct device *dev, int idx, bool alpha_sel, u16
 
 	mtk_mmsys_update_bits(mmsys, MT8195_VDO1_MIXER_IN1_ALPHA + (idx - 1) * 4, ~0,
 			      alpha << 16 | alpha, cmdq_pkt);
+	mtk_mmsys_update_bits(mmsys, MT8195_VDO1_HDR_TOP_CFG, BIT(15 + idx), 0, cmdq_pkt);
 	mtk_mmsys_update_bits(mmsys, MT8195_VDO1_HDR_TOP_CFG, BIT(19 + idx),
 			      alpha_sel << (19 + idx), cmdq_pkt);
 	mtk_mmsys_update_bits(mmsys, MT8195_VDO1_MIXER_IN1_PAD + (idx - 1) * 4,
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 03/11] soc: mediatek: Disable 9-bit alpha in ETHDR

[AngeloGioacchino Del Regno]

Il 18/09/23 10:41, Hsiao Chien Sung ha scritto:
> ETHDR 9-bit alpha should be disabled by default,
> otherwise alpha blending will not work.
> 
> Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 04/11] drm/mediatek: Add OVL compatible name for MT8195

[Hsiao Chien Sung]

Add OVL compatible name for MT8195.

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_drm_drv.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index 93552d76b6e7..7759a06e5c0e 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -715,6 +715,8 @@ static const struct of_device_id mtk_ddp_comp_dt_ids[] = {
 	  .data = (void *)MTK_DISP_OVL },
 	{ .compatible = "mediatek,mt8192-disp-ovl",
 	  .data = (void *)MTK_DISP_OVL },
+	{ .compatible = "mediatek,mt8195-disp-ovl",
+	  .data = (void *)MTK_DISP_OVL },
 	{ .compatible = "mediatek,mt8183-disp-ovl-2l",
 	  .data = (void *)MTK_DISP_OVL_2L },
 	{ .compatible = "mediatek,mt8192-disp-ovl-2l",
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 04/11] drm/mediatek: Add OVL compatible name for MT8195

[CK Hu (胡俊光)]

On Mon, 2023-09-18 at 16:42 +0800, Hsiao Chien Sung wrote:
> Add OVL compatible name for MT8195.

Reviewed-by: CK Hu <ck.hu@mediatek.com>

but it's weird to put this patch into IGT series. Without this patch,
mt8195 drm driver does not work not only IGT.

Regards,
CK

> 
> Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_drm_drv.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> index 93552d76b6e7..7759a06e5c0e 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> @@ -715,6 +715,8 @@ static const struct of_device_id
> mtk_ddp_comp_dt_ids[] = {
>  	  .data = (void *)MTK_DISP_OVL },
>  	{ .compatible = "mediatek,mt8192-disp-ovl",
>  	  .data = (void *)MTK_DISP_OVL },
> +	{ .compatible = "mediatek,mt8195-disp-ovl",
> +	  .data = (void *)MTK_DISP_OVL },
>  	{ .compatible = "mediatek,mt8183-disp-ovl-2l",
>  	  .data = (void *)MTK_DISP_OVL_2L },
>  	{ .compatible = "mediatek,mt8192-disp-ovl-2l",
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 04/11] drm/mediatek: Add OVL compatible name for MT8195

[AngeloGioacchino Del Regno]

Il 18/09/23 11:09, CK Hu (胡俊光) ha scritto:
> On Mon, 2023-09-18 at 16:42 +0800, Hsiao Chien Sung wrote:
>> Add OVL compatible name for MT8195.
> 
> Reviewed-by: CK Hu <ck.hu@mediatek.com>
> 
> but it's weird to put this patch into IGT series. Without this patch,
> mt8195 drm driver does not work not only IGT.
> 

The driver does work because the devicetree node declares two compatibles,
"mediatek,mt8195-disp-ovl", "mediatek,mt8183-disp-ovl" where the second
compatible is matched in mtk_drm_drv, and the first is matched in mtk_disp_ovl
as both are platform_driver.

This commit is not necessary, even... :-)

Regards,
Angelo

> Regards,
> CK
> 
>>
>> Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
>> ---
>>   drivers/gpu/drm/mediatek/mtk_drm_drv.c | 2 ++
>>   1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
>> b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
>> index 93552d76b6e7..7759a06e5c0e 100644
>> --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
>> +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
>> @@ -715,6 +715,8 @@ static const struct of_device_id
>> mtk_ddp_comp_dt_ids[] = {
>>   	  .data = (void *)MTK_DISP_OVL },
>>   	{ .compatible = "mediatek,mt8192-disp-ovl",
>>   	  .data = (void *)MTK_DISP_OVL },
>> +	{ .compatible = "mediatek,mt8195-disp-ovl",
>> +	  .data = (void *)MTK_DISP_OVL },
>>   	{ .compatible = "mediatek,mt8183-disp-ovl-2l",
>>   	  .data = (void *)MTK_DISP_OVL_2L },
>>   	{ .compatible = "mediatek,mt8192-disp-ovl-2l",



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 04/11] drm/mediatek: Add OVL compatible name for MT8195

[CK Hu (胡俊光)]

On Mon, 2023-09-18 at 11:21 +0200, AngeloGioacchino Del Regno wrote:
> Il 18/09/23 11:09, CK Hu (胡俊光) ha scritto:
> > On Mon, 2023-09-18 at 16:42 +0800, Hsiao Chien Sung wrote:
> > > Add OVL compatible name for MT8195.
> > 
> > Reviewed-by: CK Hu <ck.hu@mediatek.com>
> > 
> > but it's weird to put this patch into IGT series. Without this
> > patch,
> > mt8195 drm driver does not work not only IGT.
> > 
> 
> The driver does work because the devicetree node declares two
> compatibles,
> "mediatek,mt8195-disp-ovl", "mediatek,mt8183-disp-ovl" where the
> second
> compatible is matched in mtk_drm_drv, and the first is matched in
> mtk_disp_ovl
> as both are platform_driver.
> 
> This commit is not necessary, even... :-)


Agree. This patch is not necessary.

Regards,
CK

> 
> Regards,
> Angelo
> 
> > Regards,
> > CK
> > 
> > > 
> > > Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
> > > ---
> > >   drivers/gpu/drm/mediatek/mtk_drm_drv.c | 2 ++
> > >   1 file changed, 2 insertions(+)
> > > 
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > > b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > > index 93552d76b6e7..7759a06e5c0e 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > > @@ -715,6 +715,8 @@ static const struct of_device_id
> > > mtk_ddp_comp_dt_ids[] = {
> > >   	  .data = (void *)MTK_DISP_OVL },
> > >   	{ .compatible = "mediatek,mt8192-disp-ovl",
> > >   	  .data = (void *)MTK_DISP_OVL },
> > > +	{ .compatible = "mediatek,mt8195-disp-ovl",
> > > +	  .data = (void *)MTK_DISP_OVL },
> > >   	{ .compatible = "mediatek,mt8183-disp-ovl-2l",
> > >   	  .data = (void *)MTK_DISP_OVL_2L },
> > >   	{ .compatible = "mediatek,mt8192-disp-ovl-2l",
> 
> 
> 
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 04/11] drm/mediatek: Add OVL compatible name for MT8195

[Shawn Sung (宋孝謙)]

Hi, Angelo and CK,

On Mon, 2023-09-18 at 11:21 +0200, AngeloGioacchino Del Regno wrote:
> Il 18/09/23 11:09, CK Hu (胡俊光) ha scritto:
> > On Mon, 2023-09-18 at 16:42 +0800, Hsiao Chien Sung wrote:
> > > Add OVL compatible name for MT8195.
> > 
> > Reviewed-by: CK Hu <ck.hu@mediatek.com>
> > 
> > but it's weird to put this patch into IGT series. Without this
> > patch,
> > mt8195 drm driver does not work not only IGT.
> > 
> 
> The driver does work because the devicetree node declares two
> compatibles,
> "mediatek,mt8195-disp-ovl", "mediatek,mt8183-disp-ovl" where the
> second
> compatible is matched in mtk_drm_drv, and the first is matched in
> mtk_disp_ovl
> as both are platform_driver.
> 
> This commit is not necessary, even... :-)
> 
> Regards,
> Angelo
> 
> > Regards,
> > CK
> > 
> > > 
> > > Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
> > > ---
> > >   drivers/gpu/drm/mediatek/mtk_drm_drv.c | 2 ++
> > >   1 file changed, 2 insertions(+)
> > > 
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > > b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > > index 93552d76b6e7..7759a06e5c0e 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > > @@ -715,6 +715,8 @@ static const struct of_device_id
> > > mtk_ddp_comp_dt_ids[] = {
> > >   	  .data = (void *)MTK_DISP_OVL },
> > >   	{ .compatible = "mediatek,mt8192-disp-ovl",
> > >   	  .data = (void *)MTK_DISP_OVL },
> > > +	{ .compatible = "mediatek,mt8195-disp-ovl",
> > > +	  .data = (void *)MTK_DISP_OVL },
> > >   	{ .compatible = "mediatek,mt8183-disp-ovl-2l",
> > >   	  .data = (void *)MTK_DISP_OVL_2L },
> > >   	{ .compatible = "mediatek,mt8192-disp-ovl-2l",
> 
> 

Please refer to c6aa5f1fb505. This is the main reason why we have to
use MT8195 instead of MT8183/MT8192. Most of the formats required by
IGT is not supported.

Without this commit, DRM won't work after changing the compatible name 
of ovl0 to "mediatek,mt8195-disp-ovl" in the dts.

Thanks,
Shawn
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 04/11] drm/mediatek: Add OVL compatible name for MT8195

[AngeloGioacchino Del Regno]

Il 11/10/23 11:38, Shawn Sung (宋孝謙) ha scritto:
> Hi, Angelo and CK,
> 
> On Mon, 2023-09-18 at 11:21 +0200, AngeloGioacchino Del Regno wrote:
>> Il 18/09/23 11:09, CK Hu (胡俊光) ha scritto:
>>> On Mon, 2023-09-18 at 16:42 +0800, Hsiao Chien Sung wrote:
>>>> Add OVL compatible name for MT8195.
>>>
>>> Reviewed-by: CK Hu <ck.hu@mediatek.com>
>>>
>>> but it's weird to put this patch into IGT series. Without this
>>> patch,
>>> mt8195 drm driver does not work not only IGT.
>>>
>>
>> The driver does work because the devicetree node declares two
>> compatibles,
>> "mediatek,mt8195-disp-ovl", "mediatek,mt8183-disp-ovl" where the
>> second
>> compatible is matched in mtk_drm_drv, and the first is matched in
>> mtk_disp_ovl
>> as both are platform_driver.
>>
>> This commit is not necessary, even... :-)
>>
>> Regards,
>> Angelo
>>
>>> Regards,
>>> CK
>>>
>>>>
>>>> Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
>>>> ---
>>>>    drivers/gpu/drm/mediatek/mtk_drm_drv.c | 2 ++
>>>>    1 file changed, 2 insertions(+)
>>>>
>>>> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
>>>> b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
>>>> index 93552d76b6e7..7759a06e5c0e 100644
>>>> --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
>>>> +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
>>>> @@ -715,6 +715,8 @@ static const struct of_device_id
>>>> mtk_ddp_comp_dt_ids[] = {
>>>>    	  .data = (void *)MTK_DISP_OVL },
>>>>    	{ .compatible = "mediatek,mt8192-disp-ovl",
>>>>    	  .data = (void *)MTK_DISP_OVL },
>>>> +	{ .compatible = "mediatek,mt8195-disp-ovl",
>>>> +	  .data = (void *)MTK_DISP_OVL },
>>>>    	{ .compatible = "mediatek,mt8183-disp-ovl-2l",
>>>>    	  .data = (void *)MTK_DISP_OVL_2L },
>>>>    	{ .compatible = "mediatek,mt8192-disp-ovl-2l",
>>
>>
> 
> Please refer to c6aa5f1fb505. This is the main reason why we have to
> use MT8195 instead of MT8183/MT8192. Most of the formats required by
> IGT is not supported.
> 
> Without this commit, DRM won't work after changing the compatible name
> of ovl0 to "mediatek,mt8195-disp-ovl" in the dts.
> 
> Thanks,
> Shawn

You don't have to change anything at all in the dts.

The current mt8195.dtsi declares:
compatible = "mediatek,mt8195-disp-ovl", "mediatek,mt8183-disp-ovl";

..this is enough to get the mediatek,mt8195-disp-ovl match in mtk_disp_ovl.

Regards,
Angelo

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 04/11] drm/mediatek: Add OVL compatible name for MT8195

[Shawn Sung (宋孝謙)]

Hi Angelo,

On Wed, 2023-10-11 at 13:51 +0200, AngeloGioacchino Del Regno wrote:
> Il 11/10/23 11:38, Shawn Sung (宋孝謙) ha scritto:
> > Hi, Angelo and CK,
> > 
> > On Mon, 2023-09-18 at 11:21 +0200, AngeloGioacchino Del Regno
> > wrote:
> > > Il 18/09/23 11:09, CK Hu (胡俊光) ha scritto:
> > > > On Mon, 2023-09-18 at 16:42 +0800, Hsiao Chien Sung wrote:
> > > > > Add OVL compatible name for MT8195.
> > > > 
> > > > Reviewed-by: CK Hu <ck.hu@mediatek.com>
> > > > 
> > > > but it's weird to put this patch into IGT series. Without this
> > > > patch,
> > > > mt8195 drm driver does not work not only IGT.
> > > > 
> > > 
> > > The driver does work because the devicetree node declares two
> > > compatibles,
> > > "mediatek,mt8195-disp-ovl", "mediatek,mt8183-disp-ovl" where the
> > > second
> > > compatible is matched in mtk_drm_drv, and the first is matched in
> > > mtk_disp_ovl
> > > as both are platform_driver.
> > > 
> > > This commit is not necessary, even... :-)
> > > 
> > > Regards,
> > > Angelo
> > > 
> > > > Regards,
> > > > CK
> > > > 
> > > > > 
> > > > > Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
> > > > > ---
> > > > >    drivers/gpu/drm/mediatek/mtk_drm_drv.c | 2 ++
> > > > >    1 file changed, 2 insertions(+)
> > > > > 
> > > > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > > > > b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > > > > index 93552d76b6e7..7759a06e5c0e 100644
> > > > > --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > > > > +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > > > > @@ -715,6 +715,8 @@ static const struct of_device_id
> > > > > mtk_ddp_comp_dt_ids[] = {
> > > > >    	  .data = (void *)MTK_DISP_OVL },
> > > > >    	{ .compatible = "mediatek,mt8192-disp-ovl",
> > > > >    	  .data = (void *)MTK_DISP_OVL },
> > > > > +	{ .compatible = "mediatek,mt8195-disp-ovl",
> > > > > +	  .data = (void *)MTK_DISP_OVL },
> > > > >    	{ .compatible = "mediatek,mt8183-disp-ovl-2l",
> > > > >    	  .data = (void *)MTK_DISP_OVL_2L },
> > > > >    	{ .compatible = "mediatek,mt8192-disp-ovl-2l",
> > > 
> > > 
> > 
> > Please refer to c6aa5f1fb505. This is the main reason why we have
> > to
> > use MT8195 instead of MT8183/MT8192. Most of the formats required
> > by
> > IGT is not supported.
> > 
> > Without this commit, DRM won't work after changing the compatible
> > name
> > of ovl0 to "mediatek,mt8195-disp-ovl" in the dts.
> > 
> > Thanks,
> > Shawn
> 
> You don't have to change anything at all in the dts.
> 
> The current mt8195.dtsi declares:
> compatible = "mediatek,mt8195-disp-ovl", "mediatek,mt8183-disp-ovl";
> 
> ..this is enough to get the mediatek,mt8195-disp-ovl match in
> mtk_disp_ovl.
> 
> Regards,
> Angelo

We are running IGT on MT8188 and current patch is based on Kernel 6.1.

Regards,
Shawn
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 05/11] drm/mediatek: Adjust DRM mode configs for IGT

[Hsiao Chien Sung]

IGT (Intel GPU Tool) could commit the following planes
during the test:

kms_plane:

The sub-tests pixel-format-* will create planes with
size of 1 or 4512 pixels, these size will be rejected
by the original mode configs.
Adjust minimum and maximum value of both plane width
and height.

kms_cursor_crc:

If cursor_width and cursor_height is not defined,
IGT uses min_width and min_height as the limitation
when creating cursor plane so sub-tests like
cursor-rapid-movement will be skipped.
Set cursor_width and cursor_height to 512 pixel can
solve the problem.

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_drm_drv.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index 7759a06e5c0e..62581b2a470b 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -429,16 +429,18 @@ static int mtk_drm_kms_init(struct drm_device *drm)
 	if (ret)
 		goto put_mutex_dev;
 
-	drm->mode_config.min_width = 64;
-	drm->mode_config.min_height = 64;
+	drm->mode_config.min_width = 1;
+	drm->mode_config.min_height = 1;
 
 	/*
 	 * set max width and height as default value(4096x4096).
 	 * this value would be used to check framebuffer size limitation
 	 * at drm_mode_addfb().
 	 */
-	drm->mode_config.max_width = 4096;
-	drm->mode_config.max_height = 4096;
+	drm->mode_config.max_width = 8191;
+	drm->mode_config.max_height = 8191;
+	drm->mode_config.cursor_width = 512;
+	drm->mode_config.cursor_height = 512;
 	drm->mode_config.funcs = &mtk_drm_mode_config_funcs;
 	drm->mode_config.helper_private = &mtk_drm_mode_config_helpers;
 
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 05/11] drm/mediatek: Adjust DRM mode configs for IGT

[CK Hu (胡俊光)]

Hi, Hsiao-chien:

On Mon, 2023-09-18 at 16:42 +0800, Hsiao Chien Sung wrote:
> IGT (Intel GPU Tool) could commit the following planes
> during the test:
> 
> kms_plane:
> 
> The sub-tests pixel-format-* will create planes with
> size of 1 or 4512 pixels, these size will be rejected
> by the original mode configs.
> Adjust minimum and maximum value of both plane width
> and height.
> 
> kms_cursor_crc:
> 
> If cursor_width and cursor_height is not defined,
> IGT uses min_width and min_height as the limitation
> when creating cursor plane so sub-tests like
> cursor-rapid-movement will be skipped.
> Set cursor_width and cursor_height to 512 pixel can
> solve the problem.
> 
> Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_drm_drv.c | 10 ++++++----
>  1 file changed, 6 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> index 7759a06e5c0e..62581b2a470b 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> @@ -429,16 +429,18 @@ static int mtk_drm_kms_init(struct drm_device
> *drm)
>  	if (ret)
>  		goto put_mutex_dev;
>  
> -	drm->mode_config.min_width = 64;
> -	drm->mode_config.min_height = 64;
> +	drm->mode_config.min_width = 1;
> +	drm->mode_config.min_height = 1;
>  
>  	/*
>  	 * set max width and height as default value(4096x4096).
>  	 * this value would be used to check framebuffer size
> limitation
>  	 * at drm_mode_addfb().
>  	 */
> -	drm->mode_config.max_width = 4096;
> -	drm->mode_config.max_height = 4096;
> +	drm->mode_config.max_width = 8191;
> +	drm->mode_config.max_height = 8191;
> +	drm->mode_config.cursor_width = 512;
> +	drm->mode_config.cursor_height = 512;

All the setting depend on the hardware limitation. This driver support
mt8173, mt8183, .... Please make sure all SoC support this
modification. Or you just modify this for the SoC you have test.

I do not like the title mention about IGT. I think this title should be
"align mode_config to hardware limitation".

Regards,
CK

>  	drm->mode_config.funcs = &mtk_drm_mode_config_funcs;
>  	drm->mode_config.helper_private = &mtk_drm_mode_config_helpers;
>  
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 06/11] drm/mediatek: Support alpha blending in display driver

[Hsiao Chien Sung]

Support alpha blending by adding correct blend mode and
alpha property in plane initialization.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_drm_plane.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.c b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
index db2f70ae060d..f87cf56fb846 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_plane.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
@@ -301,6 +301,9 @@ int mtk_plane_init(struct drm_device *dev, struct drm_plane *plane,
 		   size_t num_formats)
 {
 	int err;
+	u32 blend_mode = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+			 BIT(DRM_MODE_BLEND_PREMULTI)   |
+			 BIT(DRM_MODE_BLEND_COVERAGE);
 
 	if (!formats || !num_formats) {
 		DRM_ERROR("no formats for plane\n");
@@ -323,6 +326,14 @@ int mtk_plane_init(struct drm_device *dev, struct drm_plane *plane,
 			DRM_INFO("Create rotation property failed\n");
 	}
 
+	err = drm_plane_create_alpha_property(plane);
+	if (err)
+		DRM_ERROR("failed to create property: alpha\n");
+
+	err = drm_plane_create_blend_mode_property(plane, blend_mode);
+	if (err)
+		DRM_ERROR("failed to create property: blend_mode\n");
+
 	drm_plane_helper_add(plane, &mtk_plane_helper_funcs);
 
 	return 0;
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 06/11] drm/mediatek: Support alpha blending in display driver

[CK Hu (胡俊光)]

Hi, Hsiao-chien:

On Mon, 2023-09-18 at 16:42 +0800, Hsiao Chien Sung wrote:
> Support alpha blending by adding correct blend mode and
> alpha property in plane initialization.
> 
> Reviewed-by: AngeloGioacchino Del Regno <
> angelogioacchino.delregno@collabora.com>
> Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_drm_plane.c | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> index db2f70ae060d..f87cf56fb846 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> @@ -301,6 +301,9 @@ int mtk_plane_init(struct drm_device *dev, struct
> drm_plane *plane,
>  		   size_t num_formats)
>  {
>  	int err;
> +	u32 blend_mode = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
> +			 BIT(DRM_MODE_BLEND_PREMULTI)   |
> +			 BIT(DRM_MODE_BLEND_COVERAGE);
>  
>  	if (!formats || !num_formats) {
>  		DRM_ERROR("no formats for plane\n");
> @@ -323,6 +326,14 @@ int mtk_plane_init(struct drm_device *dev,
> struct drm_plane *plane,
>  			DRM_INFO("Create rotation property failed\n");
>  	}
>  
> +	err = drm_plane_create_alpha_property(plane);
> +	if (err)
> +		DRM_ERROR("failed to create property: alpha\n");
> +
> +	err = drm_plane_create_blend_mode_property(plane, blend_mode);
> +	if (err)
> +		DRM_ERROR("failed to create property: blend_mode\n");

Do not always enable alpha function. Enable it depend on hardware
capability.

Regards,
CK

> +
>  	drm_plane_helper_add(plane, &mtk_plane_helper_funcs);
>  
>  	return 0;
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 07/11] drm/mediatek: Support alpha blending in VDOSYS0

[Hsiao Chien Sung]

Support premultiply and coverage alpha blending modes.

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 202 +++++++++++++++++++++---
 1 file changed, 178 insertions(+), 24 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index 2bffe4245466..8c58b204992e 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -30,6 +30,7 @@
 #define OVL_LAYER_SMI_ID_EN				BIT(0)
 #define OVL_BGCLR_SEL_IN				BIT(2)
 #define OVL_LAYER_AFBC_EN(n)				BIT(4+n)
+#define OVL_OUTPUT_CLAMP				BIT(26)
 #define DISP_REG_OVL_ROI_BGCLR			0x0028
 #define DISP_REG_OVL_SRC_CON			0x002c
 #define DISP_REG_OVL_CON(n)			(0x0030 + 0x20 * (n))
@@ -38,10 +39,28 @@
 #define DISP_REG_OVL_PITCH_MSB(n)		(0x0040 + 0x20 * (n))
 #define OVL_PITCH_MSB_2ND_SUBBUF			BIT(16)
 #define DISP_REG_OVL_PITCH(n)			(0x0044 + 0x20 * (n))
+#define OVL_CONST_BLEND					BIT(28)
 #define DISP_REG_OVL_RDMA_CTRL(n)		(0x00c0 + 0x20 * (n))
 #define DISP_REG_OVL_RDMA_GMC(n)		(0x00c8 + 0x20 * (n))
 #define DISP_REG_OVL_ADDR_MT2701		0x0040
 #define DISP_REG_OVL_CLRFMT_EXT			0x02D0
+#define DISP_REG_OVL_CLRFMT_EXT1		0x02D8
+#define OVL_CLRFMT_EXT1_CSC_EN(n)			(1 << (((n) * 4) + 1))
+#define DISP_REG_OVL_Y2R_PARA_R0(n)		(0x0134 + 0x28 * (n))
+#define OVL_Y2R_PARA_C_CF_RMY				(GENMASK(14, 0))
+#define DISP_REG_OVL_Y2R_PARA_G0(n)		(0x013c + 0x28 * (n))
+#define OVL_Y2R_PARA_C_CF_GMU				(GENMASK(30, 16))
+#define DISP_REG_OVL_Y2R_PARA_B1(n)		(0x0148 + 0x28 * (n))
+#define OVL_Y2R_PARA_C_CF_BMV				(GENMASK(14, 0))
+#define DISP_REG_OVL_Y2R_PARA_YUV_A_0(n)	(0x014c + 0x28 * (n))
+#define OVL_Y2R_PARA_C_CF_YA				(GENMASK(10, 0))
+#define OVL_Y2R_PARA_C_CF_UA				(GENMASK(26, 16))
+#define DISP_REG_OVL_Y2R_PARA_YUV_A_1(n)	(0x0150 + 0x28 * (n))
+#define OVL_Y2R_PARA_C_CF_VA				(GENMASK(10, 0))
+#define DISP_REG_OVL_Y2R_PRE_ADD2(n)		(0x0154 + 0x28 * (n))
+#define DISP_REG_OVL_R2R_R0(n)			(0x0500 + 0x40 * (n))
+#define DISP_REG_OVL_R2R_G1(n)			(0x0510 + 0x40 * (n))
+#define DISP_REG_OVL_R2R_B2(n)			(0x0520 + 0x40 * (n))
 #define DISP_REG_OVL_ADDR_MT8173		0x0f40
 #define DISP_REG_OVL_ADDR(ovl, n)		((ovl)->data->addr + 0x20 * (n))
 #define DISP_REG_OVL_HDR_ADDR(ovl, n)		((ovl)->data->addr + 0x20 * (n) + 0x04)
@@ -51,13 +70,19 @@
 #define GMC_THRESHOLD_HIGH	((1 << GMC_THRESHOLD_BITS) / 4)
 #define GMC_THRESHOLD_LOW	((1 << GMC_THRESHOLD_BITS) / 8)
 
-#define OVL_CON_BYTE_SWAP	BIT(24)
-#define OVL_CON_MTX_YUV_TO_RGB	(6 << 16)
-#define OVL_CON_CLRFMT_RGB	(1 << 12)
-#define OVL_CON_CLRFMT_RGBA8888	(2 << 12)
-#define OVL_CON_CLRFMT_ARGB8888	(3 << 12)
-#define OVL_CON_CLRFMT_UYVY	(4 << 12)
-#define OVL_CON_CLRFMT_YUYV	(5 << 12)
+#define OVL_CON_CLRFMT_MAN		BIT(23)
+#define OVL_CON_BYTE_SWAP		BIT(24)
+#define OVL_CON_RGB_SWAP		BIT(25)
+#define OVL_CON_MTX_AUTO_DIS		BIT(26)
+#define OVL_CON_MTX_EN			BIT(27)
+#define OVL_CON_CLRFMT_RGB		(1 << 12)
+#define OVL_CON_CLRFMT_RGBA8888		(2 << 12)
+#define OVL_CON_CLRFMT_ARGB8888		(3 << 12)
+#define OVL_CON_CLRFMT_PARGB8888	(OVL_CON_CLRFMT_ARGB8888 | OVL_CON_CLRFMT_MAN)
+#define OVL_CON_CLRFMT_UYVY		(4 << 12)
+#define OVL_CON_CLRFMT_YUYV		(5 << 12)
+#define OVL_CON_MTX_YUV_TO_RGB		(6 << 16)
+#define OVL_CON_MTX_PROGRAMMABLE	(8 << 16)
 #define OVL_CON_CLRFMT_RGB565(ovl)	((ovl)->data->fmt_rgb565_is_0 ? \
 					0 : OVL_CON_CLRFMT_RGB)
 #define OVL_CON_CLRFMT_RGB888(ovl)	((ovl)->data->fmt_rgb565_is_0 ? \
@@ -71,6 +96,22 @@
 #define	OVL_CON_VIRT_FLIP	BIT(9)
 #define	OVL_CON_HORZ_FLIP	BIT(10)
 
+static inline bool is_10bit_rgb(u32 fmt)
+{
+	switch (fmt) {
+	case DRM_FORMAT_XRGB2101010:
+	case DRM_FORMAT_ARGB2101010:
+	case DRM_FORMAT_RGBX1010102:
+	case DRM_FORMAT_RGBA1010102:
+	case DRM_FORMAT_XBGR2101010:
+	case DRM_FORMAT_ABGR2101010:
+	case DRM_FORMAT_BGRX1010102:
+	case DRM_FORMAT_BGRA1010102:
+		return true;
+	}
+	return false;
+}
+
 static const u32 mt8173_formats[] = {
 	DRM_FORMAT_XRGB8888,
 	DRM_FORMAT_ARGB8888,
@@ -88,12 +129,20 @@ static const u32 mt8173_formats[] = {
 static const u32 mt8195_formats[] = {
 	DRM_FORMAT_XRGB8888,
 	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XRGB2101010,
 	DRM_FORMAT_ARGB2101010,
 	DRM_FORMAT_BGRX8888,
 	DRM_FORMAT_BGRA8888,
+	DRM_FORMAT_BGRX1010102,
 	DRM_FORMAT_BGRA1010102,
 	DRM_FORMAT_ABGR8888,
 	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_XBGR2101010,
+	DRM_FORMAT_ABGR2101010,
+	DRM_FORMAT_RGBX8888,
+	DRM_FORMAT_RGBA8888,
+	DRM_FORMAT_RGBX1010102,
+	DRM_FORMAT_RGBA1010102,
 	DRM_FORMAT_RGB888,
 	DRM_FORMAT_BGR888,
 	DRM_FORMAT_RGB565,
@@ -207,14 +256,19 @@ void mtk_ovl_clk_disable(struct device *dev)
 void mtk_ovl_start(struct device *dev)
 {
 	struct mtk_disp_ovl *ovl = dev_get_drvdata(dev);
+	unsigned int reg = readl(ovl->regs + DISP_REG_OVL_DATAPATH_CON);
 
-	if (ovl->data->smi_id_en) {
-		unsigned int reg;
+	if (ovl->data->smi_id_en)
+		reg |= OVL_LAYER_SMI_ID_EN;
 
-		reg = readl(ovl->regs + DISP_REG_OVL_DATAPATH_CON);
-		reg = reg | OVL_LAYER_SMI_ID_EN;
-		writel_relaxed(reg, ovl->regs + DISP_REG_OVL_DATAPATH_CON);
-	}
+	/*
+	 * clamp output to 10 bits per channel
+	 * overflow and underflow usually happens when doing Y2R conversion
+	 * this bit should be always enable to avoid this kind of situation
+	 */
+	reg |= OVL_OUTPUT_CLAMP;
+
+	writel_relaxed(reg, ovl->regs + DISP_REG_OVL_DATAPATH_CON);
 	writel_relaxed(0x1, ovl->regs + DISP_REG_OVL_EN);
 }
 
@@ -253,9 +307,7 @@ static void mtk_ovl_set_bit_depth(struct device *dev, int idx, u32 format,
 	reg = readl(ovl->regs + DISP_REG_OVL_CLRFMT_EXT);
 	reg &= ~OVL_CON_CLRFMT_BIT_DEPTH_MASK(idx);
 
-	if (format == DRM_FORMAT_RGBA1010102 ||
-	    format == DRM_FORMAT_BGRA1010102 ||
-	    format == DRM_FORMAT_ARGB2101010)
+	if (is_10bit_rgb(format))
 		bit_depth = OVL_CON_CLRFMT_10_BIT;
 
 	reg |= OVL_CON_CLRFMT_BIT_DEPTH(bit_depth, idx);
@@ -273,7 +325,8 @@ void mtk_ovl_config(struct device *dev, unsigned int w,
 	if (w != 0 && h != 0)
 		mtk_ddp_write_relaxed(cmdq_pkt, h << 16 | w, &ovl->cmdq_reg, ovl->regs,
 				      DISP_REG_OVL_ROI_SIZE);
-	mtk_ddp_write_relaxed(cmdq_pkt, 0x0, &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_ROI_BGCLR);
+	mtk_ddp_write_relaxed(cmdq_pkt, 0xff000000, &ovl->cmdq_reg, ovl->regs,
+			      DISP_REG_OVL_ROI_BGCLR);
 
 	mtk_ddp_write(cmdq_pkt, 0x1, &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_RST);
 	mtk_ddp_write(cmdq_pkt, 0x0, &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_RST);
@@ -356,7 +409,8 @@ void mtk_ovl_layer_off(struct device *dev, unsigned int idx,
 		      DISP_REG_OVL_RDMA_CTRL(idx));
 }
 
-static unsigned int ovl_fmt_convert(struct mtk_disp_ovl *ovl, unsigned int fmt)
+static unsigned int ovl_fmt_convert(struct mtk_disp_ovl *ovl, unsigned int fmt,
+				    unsigned int blend_mode)
 {
 	/* The return value in switch "MEM_MODE_INPUT_FORMAT_XXX"
 	 * is defined in mediatek HW data sheet.
@@ -375,17 +429,37 @@ static unsigned int ovl_fmt_convert(struct mtk_disp_ovl *ovl, unsigned int fmt)
 		return OVL_CON_CLRFMT_RGB888(ovl) | OVL_CON_BYTE_SWAP;
 	case DRM_FORMAT_RGBX8888:
 	case DRM_FORMAT_RGBA8888:
+		return blend_mode == DRM_MODE_BLEND_COVERAGE ?
+		       OVL_CON_CLRFMT_ARGB8888 :
+		       OVL_CON_CLRFMT_PARGB8888;
+	case DRM_FORMAT_RGBX1010102:
+	case DRM_FORMAT_RGBA1010102:
 		return OVL_CON_CLRFMT_ARGB8888;
 	case DRM_FORMAT_BGRX8888:
 	case DRM_FORMAT_BGRA8888:
+		return OVL_CON_BYTE_SWAP |
+		       (blend_mode == DRM_MODE_BLEND_COVERAGE ?
+		       OVL_CON_CLRFMT_ARGB8888 :
+		       OVL_CON_CLRFMT_PARGB8888);
+	case DRM_FORMAT_BGRX1010102:
 	case DRM_FORMAT_BGRA1010102:
 		return OVL_CON_CLRFMT_ARGB8888 | OVL_CON_BYTE_SWAP;
 	case DRM_FORMAT_XRGB8888:
 	case DRM_FORMAT_ARGB8888:
+		return blend_mode == DRM_MODE_BLEND_COVERAGE ?
+		       OVL_CON_CLRFMT_RGBA8888 :
+		       OVL_CON_CLRFMT_PARGB8888;
+	case DRM_FORMAT_XRGB2101010:
 	case DRM_FORMAT_ARGB2101010:
 		return OVL_CON_CLRFMT_RGBA8888;
 	case DRM_FORMAT_XBGR8888:
 	case DRM_FORMAT_ABGR8888:
+		return OVL_CON_RGB_SWAP |
+		       (blend_mode == DRM_MODE_BLEND_COVERAGE ?
+		       OVL_CON_CLRFMT_RGBA8888 :
+		       OVL_CON_CLRFMT_PARGB8888);
+	case DRM_FORMAT_XBGR2101010:
+	case DRM_FORMAT_ABGR2101010:
 		return OVL_CON_CLRFMT_RGBA8888 | OVL_CON_BYTE_SWAP;
 	case DRM_FORMAT_UYVY:
 		return OVL_CON_CLRFMT_UYVY | OVL_CON_MTX_YUV_TO_RGB;
@@ -407,6 +481,8 @@ void mtk_ovl_layer_config(struct device *dev, unsigned int idx,
 	unsigned int fmt = pending->format;
 	unsigned int offset = (pending->y << 16) | pending->x;
 	unsigned int src_size = (pending->height << 16) | pending->width;
+	unsigned int blend_mode = state->base.pixel_blend_mode;
+	unsigned int ignore_pixel_alpha = 0;
 	unsigned int con;
 	bool is_afbc = pending->modifier != DRM_FORMAT_MOD_LINEAR;
 	union overlay_pitch {
@@ -419,14 +495,92 @@ void mtk_ovl_layer_config(struct device *dev, unsigned int idx,
 
 	overlay_pitch.pitch = pitch;
 
-	if (!pending->enable) {
+	if (!pending->enable || !pending->width || !pending->height) {
 		mtk_ovl_layer_off(dev, idx, cmdq_pkt);
 		return;
 	}
 
-	con = ovl_fmt_convert(ovl, fmt);
-	if (state->base.fb && state->base.fb->format->has_alpha)
-		con |= OVL_CON_AEN | OVL_CON_ALPHA;
+	con = ovl_fmt_convert(ovl, fmt, blend_mode);
+	if (state->base.fb) {
+		con |= OVL_CON_AEN;
+		con |= state->base.alpha & 0xff;
+	}
+
+	if (blend_mode == DRM_MODE_BLEND_PIXEL_NONE ||
+	    (state->base.fb && !state->base.fb->format->has_alpha))
+		ignore_pixel_alpha = OVL_CONST_BLEND;
+
+	/* need to do Y2R and R2R to reduce 10bit data to 8bit for CRC calculation */
+	if (ovl->data->supports_clrfmt_ext) {
+		u32 y2r_coef = 0, y2r_offset = 0, r2r_coef = 0, csc_en = 0;
+
+		if (is_10bit_rgb(fmt)) {
+			con |= OVL_CON_MTX_AUTO_DIS | OVL_CON_MTX_EN | OVL_CON_MTX_PROGRAMMABLE;
+
+			/*
+			 * Y2R coef setting
+			 * bit 13 is 2^1, bit 12 is 2^0, bit 11 is 2^-1,
+			 * bit 10 is 2^-2 = 0.25
+			 */
+			y2r_coef = BIT(10);
+
+			/* -1 in 10bit */
+			y2r_offset = GENMASK(10, 0) - 1;
+
+			/*
+			 * R2R coef setting
+			 * bit 19 is 2^1, bit 18 is 2^0, bit 17 is 2^-1,
+			 * bit 20 is 2^2 = 4
+			 */
+			r2r_coef = BIT(20);
+
+			/* CSC_EN is for R2R */
+			csc_en = OVL_CLRFMT_EXT1_CSC_EN(idx);
+
+			/*
+			 * 1. YUV input data - 1 and shift right for 2 bits to remove it
+			 * [R']   [0.25    0    0]   [Y in - 1]
+			 * [G'] = [   0 0.25    0] * [U in - 1]
+			 * [B']   [   0    0 0.25]   [V in - 1]
+			 *
+			 * 2. shift left for 2 bit letting the last 2 bits become 0
+			 * [R out]   [ 4  0  0]   [R']
+			 * [G out] = [ 0  4  0] * [G']
+			 * [B out]   [ 0  0  4]   [B']
+			 */
+		}
+
+		mtk_ddp_write_mask(cmdq_pkt, y2r_coef,
+				   &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_Y2R_PARA_R0(idx),
+				   OVL_Y2R_PARA_C_CF_RMY);
+		mtk_ddp_write_mask(cmdq_pkt, (y2r_coef << 16),
+				   &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_Y2R_PARA_G0(idx),
+				   OVL_Y2R_PARA_C_CF_GMU);
+		mtk_ddp_write_mask(cmdq_pkt, y2r_coef,
+				   &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_Y2R_PARA_B1(idx),
+				   OVL_Y2R_PARA_C_CF_BMV);
+
+		mtk_ddp_write_mask(cmdq_pkt, y2r_offset,
+				   &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_Y2R_PARA_YUV_A_0(idx),
+				   OVL_Y2R_PARA_C_CF_YA);
+		mtk_ddp_write_mask(cmdq_pkt, (y2r_offset << 16),
+				   &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_Y2R_PARA_YUV_A_0(idx),
+				   OVL_Y2R_PARA_C_CF_UA);
+		mtk_ddp_write_mask(cmdq_pkt, y2r_offset,
+				   &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_Y2R_PARA_YUV_A_1(idx),
+				   OVL_Y2R_PARA_C_CF_VA);
+
+		mtk_ddp_write_relaxed(cmdq_pkt, r2r_coef,
+				      &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_R2R_R0(idx));
+		mtk_ddp_write_relaxed(cmdq_pkt, r2r_coef,
+				      &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_R2R_G1(idx));
+		mtk_ddp_write_relaxed(cmdq_pkt, r2r_coef,
+				      &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_R2R_B2(idx));
+
+		mtk_ddp_write_mask(cmdq_pkt, csc_en,
+				   &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_CLRFMT_EXT1,
+				   OVL_CLRFMT_EXT1_CSC_EN(idx));
+	}
 
 	if (pending->rotation & DRM_MODE_REFLECT_Y) {
 		con |= OVL_CON_VIRT_FLIP;
@@ -443,8 +597,8 @@ void mtk_ovl_layer_config(struct device *dev, unsigned int idx,
 
 	mtk_ddp_write_relaxed(cmdq_pkt, con, &ovl->cmdq_reg, ovl->regs,
 			      DISP_REG_OVL_CON(idx));
-	mtk_ddp_write_relaxed(cmdq_pkt, overlay_pitch.split_pitch.lsb, &ovl->cmdq_reg, ovl->regs,
-			      DISP_REG_OVL_PITCH(idx));
+	mtk_ddp_write_relaxed(cmdq_pkt, overlay_pitch.split_pitch.lsb | ignore_pixel_alpha,
+			      &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_PITCH(idx));
 	mtk_ddp_write_relaxed(cmdq_pkt, src_size, &ovl->cmdq_reg, ovl->regs,
 			      DISP_REG_OVL_SRC_SIZE(idx));
 	mtk_ddp_write_relaxed(cmdq_pkt, offset, &ovl->cmdq_reg, ovl->regs,
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 08/11] drm/mediatek: Support alpha blending in VDOSYS1

[Hsiao Chien Sung]

Support premultiply and coverage alpha blending modes.

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_ethdr.c | 48 ++++++++++++++++++++++------
 1 file changed, 38 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_ethdr.c b/drivers/gpu/drm/mediatek/mtk_ethdr.c
index db7ac666ec5e..a41b3950e081 100644
--- a/drivers/gpu/drm/mediatek/mtk_ethdr.c
+++ b/drivers/gpu/drm/mediatek/mtk_ethdr.c
@@ -5,6 +5,7 @@
 
 #include <drm/drm_fourcc.h>
 #include <drm/drm_framebuffer.h>
+#include <drm/drm_blend.h>
 #include <linux/clk.h>
 #include <linux/component.h>
 #include <linux/of.h>
@@ -35,6 +36,7 @@
 #define MIX_SRC_L0_EN				BIT(0)
 #define MIX_L_SRC_CON(n)		(0x28 + 0x18 * (n))
 #define NON_PREMULTI_SOURCE			(2 << 12)
+#define PREMULTI_SOURCE				(3 << 12)
 #define MIX_L_SRC_SIZE(n)		(0x30 + 0x18 * (n))
 #define MIX_L_SRC_OFFSET(n)		(0x34 + 0x18 * (n))
 #define MIX_FUNC_DCM0			0x120
@@ -153,33 +155,59 @@ void mtk_ethdr_layer_config(struct device *dev, unsigned int idx,
 	struct mtk_plane_pending_state *pending = &state->pending;
 	unsigned int offset = (pending->x & 1) << 31 | pending->y << 16 | pending->x;
 	unsigned int align_width = ALIGN_DOWN(pending->width, 2);
-	unsigned int alpha_con = 0;
+	unsigned int mix_con = NON_PREMULTI_SOURCE;
+	bool replace_src_a = false;
+
+	union format {
+		u32 raw;
+		u8 str[5];
+	} format;
 
 	dev_dbg(dev, "%s+ idx:%d", __func__, idx);
 
 	if (idx >= 4)
 		return;
 
-	if (!pending->enable) {
+	if (!pending->enable || !pending->width || !pending->height) {
+		/*
+		 * instead of disabling layer with MIX_SRC_CON directly
+		 * set the size to 0 to avoid screen shift due to mode switch
+		 */
 		mtk_ddp_write(cmdq_pkt, 0, &mixer->cmdq_base, mixer->regs, MIX_L_SRC_SIZE(idx));
 		return;
 	}
 
-	if (state->base.fb && state->base.fb->format->has_alpha)
-		alpha_con = MIXER_ALPHA_AEN | MIXER_ALPHA;
+	mix_con |= MIXER_ALPHA_AEN | (state->base.alpha & MIXER_ALPHA);
+
+	if (state->base.pixel_blend_mode != DRM_MODE_BLEND_COVERAGE)
+		mix_con |= PREMULTI_SOURCE;
+
+	if (state->base.pixel_blend_mode == DRM_MODE_BLEND_PIXEL_NONE ||
+	    (state->base.fb && !state->base.fb->format->has_alpha)) {
+		/*
+		 * Mixer doesn't support CONST_BLD mode,
+		 * use a trick to make the output equivalent
+		 */
+		replace_src_a = true;
+	}
+
+	format.raw = pending->format;
+
+	dev_dbg(dev, "L%d: %ux%u(%u,%u)%s: SCA=0x%x(%u), MIX=0x%x\n", idx,
+		pending->width, pending->height, pending->x, pending->y,
+		format.str, (state->base.alpha & MIXER_ALPHA),
+		state->base.pixel_blend_mode, mix_con);
 
-	mtk_mmsys_mixer_in_config(priv->mmsys_dev, idx + 1, alpha_con ? false : true,
-				  DEFAULT_9BIT_ALPHA,
+	mtk_mmsys_mixer_in_config(priv->mmsys_dev, idx + 1, replace_src_a, MIXER_ALPHA,
 				  pending->x & 1 ? MIXER_INX_MODE_EVEN_EXTEND :
 				  MIXER_INX_MODE_BYPASS, align_width / 2 - 1, cmdq_pkt);
 
 	mtk_ddp_write(cmdq_pkt, pending->height << 16 | align_width, &mixer->cmdq_base,
 		      mixer->regs, MIX_L_SRC_SIZE(idx));
 	mtk_ddp_write(cmdq_pkt, offset, &mixer->cmdq_base, mixer->regs, MIX_L_SRC_OFFSET(idx));
-	mtk_ddp_write_mask(cmdq_pkt, alpha_con, &mixer->cmdq_base, mixer->regs, MIX_L_SRC_CON(idx),
-			   0x1ff);
-	mtk_ddp_write_mask(cmdq_pkt, BIT(idx), &mixer->cmdq_base, mixer->regs, MIX_SRC_CON,
-			   BIT(idx));
+	mtk_ddp_write(cmdq_pkt, mix_con, &mixer->cmdq_base, mixer->regs, MIX_L_SRC_CON(idx));
+	mtk_ddp_write_mask(cmdq_pkt, BIT(idx), &mixer->cmdq_base, mixer->regs,
+			   MIX_SRC_CON, BIT(idx));
 }
 
 void mtk_ethdr_config(struct device *dev, unsigned int w,
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 09/11] drm/mediatek: Support CRC in display driver

[Hsiao Chien Sung]

Register CRC related function pointers to support
CRC retrieval.

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c     | 258 +++++++++++++++++++-
 drivers/gpu/drm/mediatek/mtk_drm_crtc.h     |  39 +++
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h |  35 +++
 3 files changed, 330 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index b6fa4ad2f94d..59501d3eec8a 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -29,14 +29,30 @@
  * struct mtk_drm_crtc - MediaTek specific crtc structure.
  * @base: crtc object.
  * @enabled: records whether crtc_enable succeeded
+ * @pending_needs_vblank: determine if we need to handle vblank event
+ * @event: the vblank event to handle
  * @planes: array of 4 drm_plane structures, one for each overlay plane
+ * @layer_nr: layer numbers that the crtc supports
  * @pending_planes: whether any plane has pending changes to be applied
+ * @pending_async_planes: if there is any pending async update
+ * @cmdq_client: a handler to control cmdq (mbox channel, thread ...etc.)
+ * @cmdq_handle: cmdq packet to store the commands
+ * @cmdq_event: cmdq event that the thread is waiting for
+ * @cmdq_vblank_cnt: vblank count that is dedicated for the cmdq thread
+ * @cb_blocking_queue: wait queue to determine if cmdq is blocked
  * @mmsys_dev: pointer to the mmsys device for configuration registers
+ * @dma_dev: pointer to the dma device (usually rdma)
  * @mutex: handle to one of the ten disp_mutex streams
+ * @ddp_comp_nr_ori:
+ * @max_ddp_comp_nr:
  * @ddp_comp_nr: number of components in ddp_comp
  * @ddp_comp: array of pointers the mtk_ddp_comp structures used by this crtc
- *
- * TODO: Needs update: this header is missing a bunch of member descriptions.
+ * @conn_route_nr:
+ * @conn_routes:
+ * @hw_lock: mutex lock to avoid race condition when layer config
+ * @config_updating: determine if the layer configuration is done
+ * @crc_provider: get crc provider of the crtc
+ * @frames: count the frames that are added to crc entry
  */
 struct mtk_drm_crtc {
 	struct drm_crtc			base;
@@ -67,6 +83,9 @@ struct mtk_drm_crtc {
 	/* lock for display hardware access */
 	struct mutex			hw_lock;
 	bool				config_updating;
+
+	struct mtk_ddp_comp		*crc_provider;
+	unsigned int			frames;
 };
 
 struct mtk_crtc_state {
@@ -615,6 +634,14 @@ static void mtk_crtc_ddp_irq(void *data)
 	struct drm_crtc *crtc = data;
 	struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
 	struct mtk_drm_private *priv = crtc->dev->dev_private;
+	struct mtk_ddp_comp *comp = mtk_crtc->crc_provider;
+
+	/*
+	 * crc providers should make sure the crc is always correct
+	 * by resetting it in .crc_read()
+	 */
+	if (crtc->crc.opened)
+		comp->funcs->crc_read(comp->dev);
 
 #if IS_REACHABLE(CONFIG_MTK_CMDQ)
 	if (!priv->data->shadow_register && !mtk_crtc->cmdq_client.chan)
@@ -626,6 +653,24 @@ static void mtk_crtc_ddp_irq(void *data)
 	if (!priv->data->shadow_register)
 		mtk_crtc_ddp_config(crtc, NULL);
 #endif
+
+	/*
+	 * drm_crtc_add_crc_entry() could take more than 50ms to finish
+	 * put it at the end of the isr
+	 */
+	if (crtc->crc.opened) {
+		/*
+		 * skip the first crc because the first frame is configured by
+		 * mtk_crtc_ddp_hw_init() when atomic enable
+		 */
+		if (++mtk_crtc->frames > 1) {
+			drm_crtc_add_crc_entry(crtc, true,
+					       drm_crtc_vblank_count(crtc),
+					       comp->funcs->crc_entry(comp->dev));
+		}
+	} else {
+		mtk_crtc->frames = 0;
+	}
 	mtk_drm_finish_page_flip(mtk_crtc);
 }
 
@@ -647,6 +692,40 @@ static void mtk_drm_crtc_disable_vblank(struct drm_crtc *crtc)
 	mtk_ddp_comp_disable_vblank(comp);
 }
 
+static int mtk_drm_crtc_set_crc_source(struct drm_crtc *crtc, const char *src)
+{
+	if (src && strcmp(src, "auto") != 0) {
+		DRM_ERROR("%s(crtc-%d): unknown source '%s'\n",
+			  __func__, drm_crtc_index(crtc), src);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int mtk_drm_crtc_verify_crc_source(struct drm_crtc *crtc,
+					  const char *src,
+					  size_t *cnt)
+{
+	struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
+	struct mtk_ddp_comp *comp = mtk_crtc->crc_provider;
+
+	if (!comp) {
+		DRM_ERROR("%s(crtc-%d): no crc provider\n",
+			  __func__, drm_crtc_index(crtc));
+		return -ENOENT;
+	}
+
+	if (src && strcmp(src, "auto") != 0) {
+		DRM_ERROR("%s(crtc-%d): unknown source '%s'\n",
+			  __func__, drm_crtc_index(crtc), src);
+		return -EINVAL;
+	}
+
+	*cnt = comp->funcs->crc_cnt(comp->dev);
+
+	return 0;
+}
+
 int mtk_drm_crtc_plane_check(struct drm_crtc *crtc, struct drm_plane *plane,
 			     struct mtk_plane_state *state)
 {
@@ -779,6 +858,8 @@ static const struct drm_crtc_funcs mtk_crtc_funcs = {
 	.atomic_destroy_state	= mtk_drm_crtc_destroy_state,
 	.enable_vblank		= mtk_drm_crtc_enable_vblank,
 	.disable_vblank		= mtk_drm_crtc_disable_vblank,
+	.set_crc_source		= mtk_drm_crtc_set_crc_source,
+	.verify_crc_source	= mtk_drm_crtc_verify_crc_source,
 };
 
 static const struct drm_crtc_helper_funcs mtk_crtc_helper_funcs = {
@@ -961,6 +1042,11 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
 
 			if (comp->funcs->ctm_set)
 				has_ctm = true;
+
+			if (comp->funcs->crc_cnt &&
+			    comp->funcs->crc_entry &&
+			    comp->funcs->crc_read)
+				mtk_crtc->crc_provider = comp;
 		}
 
 		mtk_ddp_comp_register_vblank_cb(comp, mtk_crtc_ddp_irq,
@@ -1040,3 +1126,171 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
 #endif
 	return 0;
 }
+
+void mtk_drm_crc_init(struct mtk_drm_crc *crc,
+		      const u32 *crc_offset_table, size_t crc_count,
+		      u32 reset_offset, u32 reset_mask)
+{
+	crc->ofs = crc_offset_table;
+	crc->cnt = crc_count;
+	crc->rst_ofs = reset_offset;
+	crc->rst_msk = reset_mask;
+	crc->va = kcalloc(crc->cnt, sizeof(*crc->va), GFP_KERNEL);
+	if (!crc->va) {
+		DRM_ERROR("failed to allocate memory for crc\n");
+		crc->cnt = 0;
+	}
+}
+
+void mtk_drm_crc_read(struct mtk_drm_crc *crc, void __iomem *reg)
+{
+	if (!crc->cnt || !crc->ofs || !crc->va)
+		return;
+
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+	/* sync to see the most up-to-date copy of the DMA buffer */
+	dma_sync_single_for_cpu(crc->cmdq_client.chan->mbox->dev,
+				crc->pa, crc->cnt * sizeof(*crc->va),
+				DMA_FROM_DEVICE);
+#else
+	/* read crc with cpu for the platforms without cmdq */
+	{
+		u32 n;
+
+		for (n = 0; n < crc->cnt; n++)
+			crc->va[n] = readl(reg + crc->ofs[n]);
+
+		n = readl(reg + crc->rst_ofs);
+
+		/* pull reset bit */
+		n |= crc->rst_msk;
+		writel(n, reg + crc->rst_ofs);
+
+		/* release reset bit */
+		n &= ~crc->rst_msk;
+		writel(n, reg + crc->rst_ofs);
+	}
+#endif
+}
+
+void mtk_drm_crc_destroy(struct mtk_drm_crc *crc)
+{
+	if (!crc->cnt)
+		return;
+
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+	if (crc->pa) {
+		dma_unmap_single(crc->cmdq_client.chan->mbox->dev,
+				 crc->pa, crc->cnt * sizeof(*crc->va),
+				 DMA_TO_DEVICE);
+		crc->pa = 0;
+	}
+	if (crc->cmdq_client.chan) {
+		mtk_drm_cmdq_pkt_destroy(&crc->cmdq_handle);
+		mbox_free_channel(crc->cmdq_client.chan);
+		crc->cmdq_client.chan = NULL;
+	}
+#endif
+	kfree(crc->va);
+	crc->va = NULL;
+	crc->cnt = 0;
+}
+
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+void mtk_drm_crc_cmdq_create(struct device *dev, struct mtk_drm_crc *crc)
+{
+	int i;
+
+	if (!crc->cnt) {
+		dev_warn(dev, "%s: not support\n", __func__);
+		goto cleanup;
+	}
+
+	if (!crc->ofs) {
+		dev_warn(dev, "%s: not defined\n", __func__);
+		goto cleanup;
+	}
+
+	crc->cmdq_client.client.dev = dev;
+	crc->cmdq_client.client.tx_block = false;
+	crc->cmdq_client.client.knows_txdone = true;
+	crc->cmdq_client.client.rx_callback = NULL;
+	crc->cmdq_client.chan = mbox_request_channel(&crc->cmdq_client.client, 0);
+	if (IS_ERR(crc->cmdq_client.chan)) {
+		dev_warn(dev, "%s: failed to create mailbox client\n", __func__);
+		crc->cmdq_client.chan = NULL;
+		goto cleanup;
+	}
+
+	if (mtk_drm_cmdq_pkt_create(&crc->cmdq_client, &crc->cmdq_handle, PAGE_SIZE)) {
+		dev_warn(dev, "%s: failed to create cmdq packet\n", __func__);
+		goto cleanup;
+	}
+
+	if (!crc->va) {
+		dev_warn(dev, "%s: no memory\n", __func__);
+		goto cleanup;
+	}
+
+	/* map the entry to get a dma address for cmdq to store the crc */
+	crc->pa = dma_map_single(crc->cmdq_client.chan->mbox->dev,
+				 crc->va, crc->cnt * sizeof(*crc->va),
+				 DMA_FROM_DEVICE);
+
+	if (dma_mapping_error(crc->cmdq_client.chan->mbox->dev, crc->pa)) {
+		dev_err(dev, "%s: failed to map dma\n", __func__);
+		goto cleanup;
+	}
+
+	if (crc->cmdq_event)
+		cmdq_pkt_wfe(&crc->cmdq_handle, crc->cmdq_event, true);
+
+	for (i = 0; i < crc->cnt; i++) {
+		/* put crc to spr1 register */
+		cmdq_pkt_read_s(&crc->cmdq_handle, crc->cmdq_reg->subsys,
+				crc->cmdq_reg->offset + crc->ofs[i],
+				CMDQ_THR_SPR_IDX1);
+
+		/* copy spr1 register to physical address of the crc */
+		cmdq_pkt_assign(&crc->cmdq_handle, CMDQ_THR_SPR_IDX0,
+				CMDQ_ADDR_HIGH(crc->pa + i * sizeof(*crc->va)));
+		cmdq_pkt_write_s(&crc->cmdq_handle, CMDQ_THR_SPR_IDX0,
+				 CMDQ_ADDR_LOW(crc->pa + i * sizeof(*crc->va)),
+				 CMDQ_THR_SPR_IDX1);
+	}
+	/* reset crc */
+	mtk_ddp_write_mask(&crc->cmdq_handle, ~0, crc->cmdq_reg, 0,
+			   crc->rst_ofs, crc->rst_msk);
+
+	/* clear reset bit */
+	mtk_ddp_write_mask(&crc->cmdq_handle, 0, crc->cmdq_reg, 0,
+			   crc->rst_ofs, crc->rst_msk);
+
+	cmdq_pkt_jump_absolute(&crc->cmdq_handle);
+
+	return;
+cleanup:
+	mtk_drm_crc_destroy(crc);
+}
+
+void mtk_drm_crc_cmdq_start(struct mtk_drm_crc *crc)
+{
+	if (!crc->cmdq_client.chan)
+		return;
+
+	dma_sync_single_for_device(crc->cmdq_client.chan->mbox->dev,
+				   crc->cmdq_handle.pa_base,
+				   crc->cmdq_handle.cmd_buf_size,
+				   DMA_TO_DEVICE);
+	mbox_send_message(crc->cmdq_client.chan, &crc->cmdq_handle);
+	mbox_client_txdone(crc->cmdq_client.chan, 0);
+}
+
+void mtk_drm_crc_cmdq_stop(struct mtk_drm_crc *crc)
+{
+	if (!crc->cmdq_client.chan)
+		return;
+
+	mbox_flush(crc->cmdq_client.chan, 2000);
+}
+#endif
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.h b/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
index 3e9046993d09..3e0e20a3c404 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
@@ -14,6 +14,45 @@
 #define MTK_MAX_BPC	10
 #define MTK_MIN_BPC	3
 
+/**
+ * struct mtk_drm_crc - crc related information
+ * @ofs: register offset of crc
+ * @rst_ofs: register offset of crc reset
+ * @rst_msk: register mask of crc reset
+ * @cnt: count of crc
+ * @va: pointer to the start of crc array
+ * @pa: physical address of the crc for gce to access
+ * @cmdq_event: the event to trigger the cmdq
+ * @cmdq_reg: address of the register that cmdq is going to access
+ * @cmdq_client: handler to control cmdq (mbox channel, thread ...etc.)
+ * @cmdq_handle: cmdq packet to store the commands
+ */
+struct mtk_drm_crc {
+	const u32 *ofs;
+	u32 rst_ofs;
+	u32 rst_msk;
+	size_t cnt;
+	u32 *va;
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+	dma_addr_t pa;
+	u32 cmdq_event;
+	struct cmdq_client_reg *cmdq_reg;
+	struct cmdq_client cmdq_client;
+	struct cmdq_pkt cmdq_handle;
+#endif
+};
+
+void mtk_drm_crc_init(struct mtk_drm_crc *crc,
+		      const u32 *crc_offset_table, size_t crc_count,
+		      u32 reset_offset, u32 reset_mask);
+void mtk_drm_crc_read(struct mtk_drm_crc *crc, void __iomem *reg);
+void mtk_drm_crc_destroy(struct mtk_drm_crc *crc);
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+void mtk_drm_crc_cmdq_create(struct device *dev, struct mtk_drm_crc *crc);
+void mtk_drm_crc_cmdq_start(struct mtk_drm_crc *crc);
+void mtk_drm_crc_cmdq_stop(struct mtk_drm_crc *crc);
+#endif
+
 void mtk_drm_crtc_commit(struct drm_crtc *crtc);
 int mtk_drm_crtc_create(struct drm_device *drm_dev,
 			const unsigned int *path,
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index febcaeef16a1..07c26d881187 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -45,6 +45,38 @@ enum mtk_ddp_comp_type {
 
 struct mtk_ddp_comp;
 struct cmdq_pkt;
+
+/* struct mtk_ddp_comp_funcs - function pointers of the ddp components
+ * @clk_enable: enable the clocks of the component
+ * @clk_disable: disable the clocks of the component
+ * @config: configure the component
+ * @start: start (enable) the component
+ * @stop: stop (disable) the component
+ * @register_vblank_cb: to register a callback function when vblank irq occurs
+ * @unregister_vblank_cb: to unregister the callback function from the vblank irq
+ * @enable_vblank: enable vblank irq
+ * @disable_vblank: disable vblank irq
+ * @supported_rotations: return rotation capability of the component
+ * @layer_nr: how many layers the component supports
+ * @layer_check: to check if the state of the layer is valid for the component
+ * @layer_config: to configure the component according to the state of the layer
+ * @gamma_set: to set gamma for the component
+ * @bgclr_in_on: turn on background color
+ * @bgclr_in_off: turn off background color
+ * @ctm_set: set color transformation matrix
+ * @dma_dev_get: return the device that uses direct memory access
+ * @get_formats: get the format that is currently in use by the component
+ * @get_num_formats: get number of the formats that the component supports
+ * @connect: connect the sub modules of the component
+ * @disconnect: disconnect the sub modules of the component
+ * @add: add the device to the component (mount them in the mutex)
+ * @remove: remove the device from the component (unmount them from the mutex)
+ * @encoder_index: get the encoder index of the component
+ * @crc: return the start of crc array
+ * @crc_cnt: how many CRCs the component supports
+ * @crc_entry: get the pointer to the crc entry
+ * @crc_read: call this function to read crc from the hardware component
+ */
 struct mtk_ddp_comp_funcs {
 	int (*clk_enable)(struct device *dev);
 	void (*clk_disable)(struct device *dev);
@@ -80,6 +112,9 @@ struct mtk_ddp_comp_funcs {
 	void (*disconnect)(struct device *dev, struct device *mmsys_dev, unsigned int next);
 	void (*add)(struct device *dev, struct mtk_mutex *mutex);
 	void (*remove)(struct device *dev, struct mtk_mutex *mutex);
+	size_t (*crc_cnt)(struct device *dev);
+	u32 *(*crc_entry)(struct device *dev);
+	void (*crc_read)(struct device *dev);
 };
 
 struct mtk_ddp_comp {
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 10/11] drm/mediatek: Support CRC in VDOSYS0

[Hsiao Chien Sung]

We choose OVL as CRC generator from other hardware
components that are also capable of calculating CRCs,
since its frame done event triggers vblanks, it can be
used as a signal to know when is safe to retrieve CRC of
the frame.

Please note that position of the hardware component
that is chosen as CRC generator in the display path is
significant. For example, while OVL is the first module
in VDOSYS0, its CRC won't be affected by the modules
after it, which means effects applied by PQ, Gamma,
Dither or any other components after OVL won't be
calculated in CRC generation.

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_disp_drv.h     |   3 +
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c     | 111 ++++++++++++++++++--
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c |   3 +
 3 files changed, 109 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_drv.h b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
index 2254038519e1..3e2f8084913c 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
+++ b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
@@ -100,6 +100,9 @@ void mtk_ovl_enable_vblank(struct device *dev);
 void mtk_ovl_disable_vblank(struct device *dev);
 const u32 *mtk_ovl_get_formats(struct device *dev);
 size_t mtk_ovl_get_num_formats(struct device *dev);
+size_t mtk_ovl_crc_cnt(struct device *dev);
+u32 *mtk_ovl_crc_entry(struct device *dev);
+void mtk_ovl_crc_read(struct device *dev);
 
 void mtk_ovl_adaptor_add_comp(struct device *dev, struct mtk_mutex *mutex);
 void mtk_ovl_adaptor_remove_comp(struct device *dev, struct mtk_mutex *mutex);
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index 8c58b204992e..8c7339f12410 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -24,6 +24,13 @@
 #define OVL_FME_CPL_INT					BIT(1)
 #define DISP_REG_OVL_INTSTA			0x0008
 #define DISP_REG_OVL_EN				0x000c
+#define OVL_EN						BIT(0)
+#define OVL_OP_8BIT_MODE				BIT(4)
+#define OVL_HG_FOVL_CK_ON				BIT(8)
+#define OVL_HF_FOVL_CK_ON				BIT(10)
+#define DISP_REG_OVL_TRIG			0x0010
+#define OVL_CRC_EN					BIT(8)
+#define OVL_CRC_CLR					BIT(9)
 #define DISP_REG_OVL_RST			0x0014
 #define DISP_REG_OVL_ROI_SIZE			0x0020
 #define DISP_REG_OVL_DATAPATH_CON		0x0024
@@ -43,6 +50,8 @@
 #define DISP_REG_OVL_RDMA_CTRL(n)		(0x00c0 + 0x20 * (n))
 #define DISP_REG_OVL_RDMA_GMC(n)		(0x00c8 + 0x20 * (n))
 #define DISP_REG_OVL_ADDR_MT2701		0x0040
+#define DISP_REG_OVL_CRC			0x0270
+#define OVL_CRC_OUT_MASK				GENMASK(30, 0)
 #define DISP_REG_OVL_CLRFMT_EXT			0x02D0
 #define DISP_REG_OVL_CLRFMT_EXT1		0x02D8
 #define OVL_CLRFMT_EXT1_CSC_EN(n)			(1 << (((n) * 4) + 1))
@@ -150,6 +159,24 @@ static const u32 mt8195_formats[] = {
 	DRM_FORMAT_YUYV,
 };
 
+static const u32 mt8195_ovl_crc_ofs[] = {
+	DISP_REG_OVL_CRC,
+};
+
+/**
+ * struct mtk_disp_ovl_data - ovl driver data
+ * @addr: offset of the first layer (layer-0)
+ * @gmc_bits: gmc (gating memory clock) bit masks for adjusting positivity for ovl
+ * @layer_nr: layer numbers that ovl supports
+ * @fmt_rgb565_is_0: whether or not rgb565 is represented as 0
+ * @smi_id_en: determine if smi needs to be enabled
+ * @supports_afbc: determine if ovl supports afbc
+ * @formats: format table that ovl supports
+ * @num_formats: number of formats that ovl supports
+ * @supports_clrfmt_ext: whether the ovl supports clear format (for alpha blend)
+ * @crc_ofs: crc offset table
+ * @crc_cnt: count of crc registers (could be more than one bank)
+ */
 struct mtk_disp_ovl_data {
 	unsigned int addr;
 	unsigned int gmc_bits;
@@ -160,12 +187,20 @@ struct mtk_disp_ovl_data {
 	const u32 *formats;
 	size_t num_formats;
 	bool supports_clrfmt_ext;
+	const u32 *crc_ofs;
+	size_t crc_cnt;
 };
 
-/*
+/**
  * struct mtk_disp_ovl - DISP_OVL driver structure
  * @crtc: associated crtc to report vblank events to
+ * @clk: clock of the ovl
+ * @regs: base address of the ovl register that can be accessed by cpu
+ * @cmdq_reg: register related info for cmdq (subsys, offset ...etc.)
  * @data: platform data
+ * @vblank_cb: callback function when vblank irq happened
+ * @vblank_cb_data: data to the callback function
+ * @crc: crc related information
  */
 struct mtk_disp_ovl {
 	struct drm_crtc			*crtc;
@@ -175,8 +210,30 @@ struct mtk_disp_ovl {
 	const struct mtk_disp_ovl_data	*data;
 	void				(*vblank_cb)(void *data);
 	void				*vblank_cb_data;
+	struct mtk_drm_crc		crc;
 };
 
+size_t mtk_ovl_crc_cnt(struct device *dev)
+{
+	struct mtk_disp_ovl *ovl = dev_get_drvdata(dev);
+
+	return ovl->crc.cnt;
+}
+
+u32 *mtk_ovl_crc_entry(struct device *dev)
+{
+	struct mtk_disp_ovl *ovl = dev_get_drvdata(dev);
+
+	return ovl->crc.va;
+}
+
+void mtk_ovl_crc_read(struct device *dev)
+{
+	struct mtk_disp_ovl *ovl = dev_get_drvdata(dev);
+
+	mtk_drm_crc_read(&ovl->crc, ovl->regs);
+}
+
 static irqreturn_t mtk_disp_ovl_irq_handler(int irq, void *dev_id)
 {
 	struct mtk_disp_ovl *priv = dev_id;
@@ -215,7 +272,7 @@ void mtk_ovl_enable_vblank(struct device *dev)
 	struct mtk_disp_ovl *ovl = dev_get_drvdata(dev);
 
 	writel(0x0, ovl->regs + DISP_REG_OVL_INTSTA);
-	writel_relaxed(OVL_FME_CPL_INT, ovl->regs + DISP_REG_OVL_INTEN);
+	writel(OVL_FME_CPL_INT, ovl->regs + DISP_REG_OVL_INTEN);
 }
 
 void mtk_ovl_disable_vblank(struct device *dev)
@@ -268,14 +325,30 @@ void mtk_ovl_start(struct device *dev)
 	 */
 	reg |= OVL_OUTPUT_CLAMP;
 
-	writel_relaxed(reg, ovl->regs + DISP_REG_OVL_DATAPATH_CON);
-	writel_relaxed(0x1, ovl->regs + DISP_REG_OVL_EN);
+	writel(reg, ovl->regs + DISP_REG_OVL_DATAPATH_CON);
+
+	reg = OVL_EN;
+
+	if (ovl->data->crc_cnt) {
+		/* enable crc */
+		writel(OVL_CRC_EN, ovl->regs + DISP_REG_OVL_TRIG);
+		/* enable crc related clocks */
+		reg |= OVL_OP_8BIT_MODE | OVL_HG_FOVL_CK_ON | OVL_HF_FOVL_CK_ON;
+	}
+	writel(reg, ovl->regs + DISP_REG_OVL_EN);
+
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+	mtk_drm_crc_cmdq_start(&ovl->crc);
+#endif
 }
 
 void mtk_ovl_stop(struct device *dev)
 {
 	struct mtk_disp_ovl *ovl = dev_get_drvdata(dev);
 
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+	mtk_drm_crc_cmdq_stop(&ovl->crc);
+#endif
 	writel_relaxed(0x0, ovl->regs + DISP_REG_OVL_EN);
 	if (ovl->data->smi_id_en) {
 		unsigned int reg;
@@ -688,15 +761,31 @@ static int mtk_disp_ovl_probe(struct platform_device *pdev)
 		dev_err(dev, "failed to ioremap ovl\n");
 		return PTR_ERR(priv->regs);
 	}
+
+	priv->data = of_device_get_match_data(dev);
+	platform_set_drvdata(pdev, priv);
+
+	if (priv->data->crc_cnt) {
+		mtk_drm_crc_init(&priv->crc,
+				 priv->data->crc_ofs, priv->data->crc_cnt,
+				 DISP_REG_OVL_TRIG, OVL_CRC_CLR);
+	}
+
 #if IS_REACHABLE(CONFIG_MTK_CMDQ)
 	ret = cmdq_dev_get_client_reg(dev, &priv->cmdq_reg, 0);
 	if (ret)
 		dev_dbg(dev, "get mediatek,gce-client-reg fail!\n");
-#endif
-
-	priv->data = of_device_get_match_data(dev);
-	platform_set_drvdata(pdev, priv);
 
+	if (priv->data->crc_cnt) {
+		if (of_property_read_u32_index(dev->of_node,
+					       "mediatek,gce-events", 0,
+					       &priv->crc.cmdq_event)) {
+			dev_warn(dev, "failed to get gce-events for crc\n");
+		}
+		priv->crc.cmdq_reg = &priv->cmdq_reg;
+		mtk_drm_crc_cmdq_create(dev, &priv->crc);
+	}
+#endif
 	ret = devm_request_irq(dev, irq, mtk_disp_ovl_irq_handler,
 			       IRQF_TRIGGER_NONE, dev_name(dev), priv);
 	if (ret < 0) {
@@ -717,6 +806,10 @@ static int mtk_disp_ovl_probe(struct platform_device *pdev)
 
 static void mtk_disp_ovl_remove(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
+	struct mtk_disp_ovl *ovl = dev_get_drvdata(dev);
+
+	mtk_drm_crc_destroy(&ovl->crc);
 	component_del(&pdev->dev, &mtk_disp_ovl_component_ops);
 	pm_runtime_disable(&pdev->dev);
 }
@@ -787,6 +880,8 @@ static const struct mtk_disp_ovl_data mt8195_ovl_driver_data = {
 	.formats = mt8195_formats,
 	.num_formats = ARRAY_SIZE(mt8195_formats),
 	.supports_clrfmt_ext = true,
+	.crc_ofs = mt8195_ovl_crc_ofs,
+	.crc_cnt = ARRAY_SIZE(mt8195_ovl_crc_ofs),
 };
 
 static const struct of_device_id mtk_disp_ovl_driver_dt_match[] = {
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index 771f4e173353..b8b3884dfa63 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -347,6 +347,9 @@ static const struct mtk_ddp_comp_funcs ddp_ovl = {
 	.clk_enable = mtk_ovl_clk_enable,
 	.clk_disable = mtk_ovl_clk_disable,
 	.config = mtk_ovl_config,
+	.crc_cnt = mtk_ovl_crc_cnt,
+	.crc_entry = mtk_ovl_crc_entry,
+	.crc_read = mtk_ovl_crc_read,
 	.start = mtk_ovl_start,
 	.stop = mtk_ovl_stop,
 	.register_vblank_cb = mtk_ovl_register_vblank_cb,
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 11/11] drm/mediatek: Support CRC in VDOSYS1

[Hsiao Chien Sung]

We choose Mixer as CRC generator in VDOSYS1 since
its frame done event will trigger vblanks, we can know
when is safe to retrieve CRC of the frame.

In VDOSYS1, there's no image procession after Mixer,
unlike OVL in VDOSYS0, Mixer's CRC will include all the
effects that are applied to the frame.

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_disp_drv.h       |  3 +
 .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c   | 21 ++++++
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c   |  3 +
 drivers/gpu/drm/mediatek/mtk_ethdr.c          | 73 +++++++++++++++++++
 drivers/gpu/drm/mediatek/mtk_ethdr.h          |  5 ++
 5 files changed, 105 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_drv.h b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
index 3e2f8084913c..ac8468917a2e 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
+++ b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
@@ -129,6 +129,9 @@ unsigned int mtk_ovl_adaptor_layer_nr(struct device *dev);
 struct device *mtk_ovl_adaptor_dma_dev_get(struct device *dev);
 const u32 *mtk_ovl_adaptor_get_formats(struct device *dev);
 size_t mtk_ovl_adaptor_get_num_formats(struct device *dev);
+size_t mtk_ovl_adaptor_crc_cnt(struct device *dev);
+u32 *mtk_ovl_adaptor_crc_entry(struct device *dev);
+void mtk_ovl_adaptor_crc_read(struct device *dev);
 
 void mtk_rdma_bypass_shadow(struct device *dev);
 int mtk_rdma_clk_enable(struct device *dev);
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
index 6bf6367853fb..8fe706ccee72 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
@@ -160,6 +160,27 @@ void mtk_ovl_adaptor_layer_config(struct device *dev, unsigned int idx,
 	mtk_ethdr_layer_config(ethdr, idx, state, cmdq_pkt);
 }
 
+size_t mtk_ovl_adaptor_crc_cnt(struct device *dev)
+{
+	struct mtk_disp_ovl_adaptor *ovl_adaptor = dev_get_drvdata(dev);
+
+	return mtk_ethdr_crc_cnt(ovl_adaptor->ovl_adaptor_comp[OVL_ADAPTOR_ETHDR0]);
+}
+
+u32 *mtk_ovl_adaptor_crc_entry(struct device *dev)
+{
+	struct mtk_disp_ovl_adaptor *ovl_adaptor = dev_get_drvdata(dev);
+
+	return mtk_ethdr_crc_entry(ovl_adaptor->ovl_adaptor_comp[OVL_ADAPTOR_ETHDR0]);
+}
+
+void mtk_ovl_adaptor_crc_read(struct device *dev)
+{
+	struct mtk_disp_ovl_adaptor *ovl_adaptor = dev_get_drvdata(dev);
+
+	mtk_ethdr_crc_read(ovl_adaptor->ovl_adaptor_comp[OVL_ADAPTOR_ETHDR0]);
+}
+
 void mtk_ovl_adaptor_config(struct device *dev, unsigned int w,
 			    unsigned int h, unsigned int vrefresh,
 			    unsigned int bpc, struct cmdq_pkt *cmdq_pkt)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index b8b3884dfa63..7dfb37ae2c80 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -400,6 +400,9 @@ static const struct mtk_ddp_comp_funcs ddp_ovl_adaptor = {
 	.clk_enable = mtk_ovl_adaptor_clk_enable,
 	.clk_disable = mtk_ovl_adaptor_clk_disable,
 	.config = mtk_ovl_adaptor_config,
+	.crc_cnt = mtk_ovl_adaptor_crc_cnt,
+	.crc_entry = mtk_ovl_adaptor_crc_entry,
+	.crc_read = mtk_ovl_adaptor_crc_read,
 	.start = mtk_ovl_adaptor_start,
 	.stop = mtk_ovl_adaptor_stop,
 	.layer_nr = mtk_ovl_adaptor_layer_nr,
diff --git a/drivers/gpu/drm/mediatek/mtk_ethdr.c b/drivers/gpu/drm/mediatek/mtk_ethdr.c
index a41b3950e081..693b9a438a3d 100644
--- a/drivers/gpu/drm/mediatek/mtk_ethdr.c
+++ b/drivers/gpu/drm/mediatek/mtk_ethdr.c
@@ -24,6 +24,9 @@
 #define MIX_FME_CPL_INTEN			BIT(1)
 #define MIX_INTSTA			0x8
 #define MIX_EN				0xc
+#define MIX_TRIG			0x10
+#define MIX_TRIG_CRC_EN				BIT(8)
+#define MIX_TRIG_CRC_RST			BIT(9)
 #define MIX_RST				0x14
 #define MIX_ROI_SIZE			0x18
 #define MIX_DATAPATH_CON		0x1c
@@ -39,6 +42,11 @@
 #define PREMULTI_SOURCE				(3 << 12)
 #define MIX_L_SRC_SIZE(n)		(0x30 + 0x18 * (n))
 #define MIX_L_SRC_OFFSET(n)		(0x34 + 0x18 * (n))
+
+/* CRC register offsets for odd and even lines */
+#define MIX_CRC_ODD			0x110
+#define MIX_CRC_EVEN			0x114
+
 #define MIX_FUNC_DCM0			0x120
 #define MIX_FUNC_DCM1			0x124
 #define MIX_FUNC_DCM_ENABLE			0xffffffff
@@ -74,6 +82,17 @@ struct mtk_ethdr_comp {
 	struct cmdq_client_reg	cmdq_base;
 };
 
+/**
+ * struct mtk_ethdr - ethdr driver data
+ * @ethdr_comp: components of ethdr(mixer)
+ * @ethdr_clk: clocks of ethdr components
+ * @mmsys_dev: mmsys device that ethdr binds to
+ * @vblank_cb: callback function when vblank irq occurs
+ * @vblank_cb_data: data fo vblank callback
+ * @irq: irq that triggers irq handler
+ * @reset_ctl: reset control of ethdr
+ * @crc: crc information
+ */
 struct mtk_ethdr {
 	struct mtk_ethdr_comp	ethdr_comp[ETHDR_ID_MAX];
 	struct clk_bulk_data	ethdr_clk[ETHDR_CLK_NUM];
@@ -82,6 +101,7 @@ struct mtk_ethdr {
 	void			*vblank_cb_data;
 	int			irq;
 	struct reset_control	*reset_ctl;
+	struct mtk_drm_crc	crc;
 };
 
 static const char * const ethdr_clk_str[] = {
@@ -100,6 +120,32 @@ static const char * const ethdr_clk_str[] = {
 	"vdo_be_async",
 };
 
+static const u32 ethdr_crc_ofs[] = {
+	MIX_CRC_ODD,
+	MIX_CRC_EVEN,
+};
+
+size_t mtk_ethdr_crc_cnt(struct device *dev)
+{
+	struct mtk_ethdr *priv = dev_get_drvdata(dev);
+
+	return priv->crc.cnt;
+}
+
+u32 *mtk_ethdr_crc_entry(struct device *dev)
+{
+	struct mtk_ethdr *priv = dev_get_drvdata(dev);
+
+	return priv->crc.va;
+}
+
+void mtk_ethdr_crc_read(struct device *dev)
+{
+	struct mtk_ethdr *priv = dev_get_drvdata(dev);
+
+	mtk_drm_crc_read(&priv->crc, priv->ethdr_comp[ETHDR_MIXER].regs);
+}
+
 void mtk_ethdr_register_vblank_cb(struct device *dev,
 				  void (*vblank_cb)(void *),
 				  void *vblank_cb_data)
@@ -267,6 +313,13 @@ void mtk_ethdr_start(struct device *dev)
 	struct mtk_ethdr_comp *mixer = &priv->ethdr_comp[ETHDR_MIXER];
 
 	writel(1, mixer->regs + MIX_EN);
+
+	if (priv->crc.cnt) {
+		writel(MIX_TRIG_CRC_EN, mixer->regs + MIX_TRIG);
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+		mtk_drm_crc_cmdq_start(&priv->crc);
+#endif
+	}
 }
 
 void mtk_ethdr_stop(struct device *dev)
@@ -274,6 +327,9 @@ void mtk_ethdr_stop(struct device *dev)
 	struct mtk_ethdr *priv = dev_get_drvdata(dev);
 	struct mtk_ethdr_comp *mixer = &priv->ethdr_comp[ETHDR_MIXER];
 
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+	mtk_drm_crc_cmdq_stop(&priv->crc);
+#endif
 	writel(0, mixer->regs + MIX_EN);
 	writel(1, mixer->regs + MIX_RST);
 	reset_control_reset(priv->reset_ctl);
@@ -328,6 +384,10 @@ static int mtk_ethdr_probe(struct platform_device *pdev)
 	if (!priv)
 		return -ENOMEM;
 
+	mtk_drm_crc_init(&priv->crc,
+			 ethdr_crc_ofs, ARRAY_SIZE(ethdr_crc_ofs),
+			 MIX_TRIG, MIX_TRIG_CRC_RST);
+
 	for (i = 0; i < ETHDR_ID_MAX; i++) {
 		priv->ethdr_comp[i].dev = dev;
 		priv->ethdr_comp[i].regs = of_iomap(dev->of_node, i);
@@ -336,6 +396,16 @@ static int mtk_ethdr_probe(struct platform_device *pdev)
 					      &priv->ethdr_comp[i].cmdq_base, i);
 		if (ret)
 			dev_dbg(dev, "get mediatek,gce-client-reg fail!\n");
+
+		if (i == ETHDR_MIXER) {
+			if (of_property_read_u32_index(dev->of_node,
+						       "mediatek,gce-events", i,
+						       &priv->crc.cmdq_event)) {
+				dev_warn(dev, "failed to get gce-events for crc\n");
+			}
+			priv->crc.cmdq_reg = &priv->ethdr_comp[i].cmdq_base;
+			mtk_drm_crc_cmdq_create(dev, &priv->crc);
+		}
 #endif
 		dev_dbg(dev, "[DRM]regs:0x%p, node:%d\n", priv->ethdr_comp[i].regs, i);
 	}
@@ -376,6 +446,9 @@ static int mtk_ethdr_probe(struct platform_device *pdev)
 
 static int mtk_ethdr_remove(struct platform_device *pdev)
 {
+	struct mtk_ethdr *priv = dev_get_drvdata(&pdev->dev);
+
+	mtk_drm_crc_destroy(&priv->crc);
 	component_del(&pdev->dev, &mtk_ethdr_component_ops);
 	return 0;
 }
diff --git a/drivers/gpu/drm/mediatek/mtk_ethdr.h b/drivers/gpu/drm/mediatek/mtk_ethdr.h
index 81af9edea3f7..d17d7256bd12 100644
--- a/drivers/gpu/drm/mediatek/mtk_ethdr.h
+++ b/drivers/gpu/drm/mediatek/mtk_ethdr.h
@@ -22,4 +22,9 @@ void mtk_ethdr_register_vblank_cb(struct device *dev,
 void mtk_ethdr_unregister_vblank_cb(struct device *dev);
 void mtk_ethdr_enable_vblank(struct device *dev);
 void mtk_ethdr_disable_vblank(struct device *dev);
+
+size_t mtk_ethdr_crc_cnt(struct device *dev);
+u32 *mtk_ethdr_crc_entry(struct device *dev);
+void mtk_ethdr_crc_read(struct device *dev);
+
 #endif
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel