From: Anshuman Khandual <anshuman.khandual@arm.com>
To: linux-arm-kernel@lists.infradead.org, suzuki.poulose@arm.com
Cc: Anshuman Khandual <anshuman.khandual@arm.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>, Mike Leach <mike.leach@linaro.org>,
James Clark <james.clark@arm.com>, Leo Yan <leo.yan@linaro.org>,
Jonathan Corbet <corbet@lwn.net>,
linux-doc@vger.kernel.org, coresight@lists.linaro.org,
linux-kernel@vger.kernel.org
Subject: [PATCH V6 2/3] coresight: etm: Make cycle count threshold user configurable
Date: Wed, 20 Sep 2023 15:24:42 +0530 [thread overview]
Message-ID: <20230920095443.1126617-3-anshuman.khandual@arm.com> (raw)
In-Reply-To: <20230920095443.1126617-1-anshuman.khandual@arm.com>
Cycle counting is enabled, when requested and supported but with a default
threshold value ETM_CYC_THRESHOLD_DEFAULT i.e 0x100 getting into TRCCCCTLR,
representing the minimum interval between cycle count trace packets.
This makes cycle threshold user configurable, from the user space via perf
event attributes. Although it falls back using ETM_CYC_THRESHOLD_DEFAULT,
in case no explicit request. As expected it creates a sysfs file as well.
/sys/bus/event_source/devices/cs_etm/format/cc_threshold
New 'cc_threshold' uses 'event->attr.config3' as no more space is available
in 'event->attr.config1' or 'event->attr.config2'.
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
---
drivers/hwtracing/coresight/coresight-etm-perf.c | 2 ++
drivers/hwtracing/coresight/coresight-etm4x-core.c | 9 +++++++--
2 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c
index 5ca6278baff4..09f75dffae60 100644
--- a/drivers/hwtracing/coresight/coresight-etm-perf.c
+++ b/drivers/hwtracing/coresight/coresight-etm-perf.c
@@ -68,6 +68,7 @@ PMU_FORMAT_ATTR(preset, "config:0-3");
PMU_FORMAT_ATTR(sinkid, "config2:0-31");
/* config ID - set if a system configuration is selected */
PMU_FORMAT_ATTR(configid, "config2:32-63");
+PMU_FORMAT_ATTR(cc_threshold, "config3:0-11");
/*
@@ -101,6 +102,7 @@ static struct attribute *etm_config_formats_attr[] = {
&format_attr_preset.attr,
&format_attr_configid.attr,
&format_attr_branch_broadcast.attr,
+ &format_attr_cc_threshold.attr,
NULL,
};
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c
index 9619d9d0bbb1..5b6a878a2ac5 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
@@ -644,7 +644,7 @@ static int etm4_parse_event_config(struct coresight_device *csdev,
struct etmv4_config *config = &drvdata->config;
struct perf_event_attr *attr = &event->attr;
unsigned long cfg_hash;
- int preset;
+ int preset, cc_threshold;
/* Clear configuration from previous run */
memset(config, 0, sizeof(struct etmv4_config));
@@ -667,7 +667,12 @@ static int etm4_parse_event_config(struct coresight_device *csdev,
if (attr->config & BIT(ETM_OPT_CYCACC)) {
config->cfg |= TRCCONFIGR_CCI;
/* TRM: Must program this for cycacc to work */
- config->ccctlr = ETM_CYC_THRESHOLD_DEFAULT;
+ cc_threshold = attr->config3 & ETM_CYC_THRESHOLD_MASK;
+ if (!cc_threshold)
+ cc_threshold = ETM_CYC_THRESHOLD_DEFAULT;
+ if (cc_threshold < drvdata->ccitmin)
+ cc_threshold = drvdata->ccitmin;
+ config->ccctlr = cc_threshold;
}
if (attr->config & BIT(ETM_OPT_TS)) {
/*
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-09-20 9:55 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-20 9:54 [PATCH V6 0/3] coresight: etm: Make cycle count threshold user configurable Anshuman Khandual
2023-09-20 9:54 ` [PATCH V6 1/3] coresight: etm: Override TRCIDR3.CCITMIN on errata affected cpus Anshuman Khandual
2023-09-20 9:54 ` Anshuman Khandual [this message]
2023-09-20 9:54 ` [PATCH V6 3/3] Documentation: coresight: Add cc_threshold tunable Anshuman Khandual
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230920095443.1126617-3-anshuman.khandual@arm.com \
--to=anshuman.khandual@arm.com \
--cc=catalin.marinas@arm.com \
--cc=corbet@lwn.net \
--cc=coresight@lists.linaro.org \
--cc=james.clark@arm.com \
--cc=leo.yan@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mike.leach@linaro.org \
--cc=suzuki.poulose@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).