linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Fabio Estevam <festevam@gmail.com>
To: shawnguo@kernel.org
Cc: Frank.Li@nxp.com, linux-arm-kernel@lists.infradead.org,
	Fabio Estevam <festevam@denx.de>
Subject: [PATCH] arm64: dts: imx93: Fix the dmas entries order
Date: Tue, 26 Sep 2023 11:18:54 -0300	[thread overview]
Message-ID: <20230926141854.388953-1-festevam@gmail.com> (raw)

From: Fabio Estevam <festevam@denx.de>

Per fsl-lpuart.yaml, the dmas and dma-names entries should be
'rx' followed by 'tx'.

Change the order to fix the following schema warning:

imx93-11x11-evk.dtb: serial@44380000: dma-names:0: 'rx' was expected
	from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml#
imx93-11x11-evk.dtb: serial@44380000: dma-names:1: 'tx' was expected
	from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
 arch/arm64/boot/dts/freescale/imx93.dtsi | 32 ++++++++++++------------
 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index f20dd18e0b65..d6f6aeb7da74 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -336,8 +336,8 @@ lpuart1: serial@44380000 {
 				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART1_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma1 16 0 0>, <&edma1 17 0 1>;
-				dma-names = "tx", "rx";
+				dmas = <&edma1 17 0 1>, <&edma1 16 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -347,8 +347,8 @@ lpuart2: serial@44390000 {
 				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART2_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma1 18 0 0>, <&edma1 19 0 1>;
-				dma-names = "tx", "rx";
+				dmas = <&edma1 19 0 1>, <&edma1 18 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -669,8 +669,8 @@ lpuart3: serial@42570000 {
 				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART3_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 17 0 0>, <&edma2 18 0 1>;
-				dma-names = "tx", "rx";
+				dmas = <&edma2 18 0 1>, <&edma2 17 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -680,8 +680,8 @@ lpuart4: serial@42580000 {
 				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART4_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 19 0 0>, <&edma2 20 0 1>;
-				dma-names = "tx", "rx";
+				dmas = <&edma2 20 0 1>, <&edma2 19 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -691,8 +691,8 @@ lpuart5: serial@42590000 {
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART5_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 21 0 0>, <&edma2 22 0 1>;
-				dma-names = "tx", "rx";
+				dmas = <&edma2 22 0 1>, <&edma2 21 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -702,8 +702,8 @@ lpuart6: serial@425a0000 {
 				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART6_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 23 0 0>, <&edma2 24 0 1>;
-				dma-names = "tx", "rx";
+				dmas = <&edma2 24 0 1>, <&edma2 23 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -742,8 +742,8 @@ lpuart7: serial@42690000 {
 				interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART7_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 87 0 0>, <&edma2 88 0 1>;
-				dma-names = "tx", "rx";
+				dmas = <&edma2 88 0 1>, <&edma2 87 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -753,8 +753,8 @@ lpuart8: serial@426a0000 {
 				interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART8_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 89 0 0>, <&edma2 90 0 1>;
-				dma-names = "tx", "rx";
+				dmas =  <&edma2 90 0 1>, <&edma2 89 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2023-09-26 14:19 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-26 14:18 Fabio Estevam [this message]
2023-09-26 14:31 ` [EXT] [PATCH] arm64: dts: imx93: Fix the dmas entries order Frank Li
2023-09-26 14:41   ` Fabio Estevam
2023-10-10  1:08 ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230926141854.388953-1-festevam@gmail.com \
    --to=festevam@gmail.com \
    --cc=Frank.Li@nxp.com \
    --cc=festevam@denx.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).