From: Jonathan Cameron <jic23@kernel.org>
To: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: linux-iio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org,
Lars-Peter Clausen <lars@metafoo.de>,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Alim Akhtar <alim.akhtar@samsung.com>,
Arnd Bergmann <arnd@arndb.de>
Subject: Re: [PATCH] iio: exynos-adc: request second interupt only when touchscreen mode is used
Date: Sat, 14 Oct 2023 17:48:07 +0100 [thread overview]
Message-ID: <20231014174807.353de76f@jic23-huawei> (raw)
In-Reply-To: <20231009101412.916922-1-m.szyprowski@samsung.com>
On Mon, 9 Oct 2023 12:14:12 +0200
Marek Szyprowski <m.szyprowski@samsung.com> wrote:
> Second interrupt is needed only when touchscreen mode is used, so don't
> request it unconditionally. This removes the following annoying warning
> during boot:
>
> exynos-adc 14d10000.adc: error -ENXIO: IRQ index 1 not found
>
> Fixes: 2bb8ad9b44c5 ("iio: exynos-adc: add experimental touchscreen support")
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Applied to the fixes-togreg branch of iio.git and marked for stable.
Timing wise, this might just end up going in during the merge window now.
Thanks,
Jonathan
> ---
> drivers/iio/adc/exynos_adc.c | 24 ++++++++++++++----------
> 1 file changed, 14 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
> index eb7a2dd59517..614de9644800 100644
> --- a/drivers/iio/adc/exynos_adc.c
> +++ b/drivers/iio/adc/exynos_adc.c
> @@ -826,16 +826,26 @@ static int exynos_adc_probe(struct platform_device *pdev)
> }
> }
>
> + /* leave out any TS related code if unreachable */
> + if (IS_REACHABLE(CONFIG_INPUT)) {
> + has_ts = of_property_read_bool(pdev->dev.of_node,
> + "has-touchscreen") || pdata;
> + }
> +
> irq = platform_get_irq(pdev, 0);
> if (irq < 0)
> return irq;
> info->irq = irq;
>
> - irq = platform_get_irq(pdev, 1);
> - if (irq == -EPROBE_DEFER)
> - return irq;
> + if (has_ts) {
> + irq = platform_get_irq(pdev, 1);
> + if (irq == -EPROBE_DEFER)
> + return irq;
>
> - info->tsirq = irq;
> + info->tsirq = irq;
> + } else {
> + info->tsirq = -1;
> + }
>
> info->dev = &pdev->dev;
>
> @@ -900,12 +910,6 @@ static int exynos_adc_probe(struct platform_device *pdev)
> if (info->data->init_hw)
> info->data->init_hw(info);
>
> - /* leave out any TS related code if unreachable */
> - if (IS_REACHABLE(CONFIG_INPUT)) {
> - has_ts = of_property_read_bool(pdev->dev.of_node,
> - "has-touchscreen") || pdata;
> - }
> -
> if (pdata)
> info->delay = pdata->delay;
> else
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2023-10-14 16:48 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20231009101422eucas1p2c004097457990bbaf9b3cc5df9e246fd@eucas1p2.samsung.com>
2023-10-09 10:14 ` [PATCH] iio: exynos-adc: request second interupt only when touchscreen mode is used Marek Szyprowski
2023-10-10 13:48 ` Jonathan Cameron
2023-10-14 16:48 ` Jonathan Cameron [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231014174807.353de76f@jic23-huawei \
--to=jic23@kernel.org \
--cc=alim.akhtar@samsung.com \
--cc=arnd@arndb.de \
--cc=krzysztof.kozlowski@linaro.org \
--cc=lars@metafoo.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox