[PATCH v8 04/23] dt-bindings: display: mediatek: padding: Add MT8188

Hsiao Chien Sung
2023-10-16T10:42:08Z

Padding is a new hardware module on MediaTek MT8188,
add dt-bindings for it.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
.../display/mediatek/mediatek,padding.yaml | 81 +++++++++++++++++++
1 file changed, 81 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml
new file mode 100644
index 000000000000..db24801ebc48
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,padding.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Display Padding
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description:
+ Padding provides ability to add pixels to width and height of a layer with
+ specified colors. Due to hardware design, Mixer in VDOSYS1 requires
+ width of a layer to be 2-pixel-align, or 4-pixel-align when ETHDR is enabled,
+ we need Padding to deal with odd width.
+ Please notice that even if the Padding is in bypass mode, settings in
+ register must be cleared to 0, or undefined behaviors could happen.
+
+properties:
+ compatible:
+ const: mediatek,mt8188-padding
+
+ reg:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: RDMA Clock
+
+ mediatek,gce-client-reg:
+ description:
+ GCE (Global Command Engine) is a multi-core micro processor that helps
+ its clients to execute commands without interrupting CPU. This property
+ describes GCE client's information that is composed by 4 fields.
+ 1. Phandle of the GCE (there may be several GCE processors)
+ 2. Sub-system ID defined in the dt-binding like a user ID
+ (Please refer to include/dt-bindings/gce/<chip>-gce.h)
+ 3. Offset from base address of the subsys you are at
+ 4. Size of the register the client needs
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ items:
+ - description: Phandle of the GCE
+ - description: Subsys ID defined in the dt-binding
+ - description: Offset from base address of the subsys
+ - description: Size of register
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - power-domains
+ - clocks
+ - mediatek,gce-client-reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mediatek,mt8188-clk.h>
+ #include <dt-bindings/power/mediatek,mt8188-power.h>
+ #include <dt-bindings/gce/mt8195-gce.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ padding0: padding@1c11d000 {
+ compatible = "mediatek,mt8188-padding";
+ reg = <0 0x1c11d000 0 0x1000>;
+ clocks = <&vdosys1 CLK_VDO1_PADDING0>;
+ power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+ mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0xd000 0x1000>;
+ };
+ };
--
2.18.0