* [PATCH net-next v4 0/2] Switch DSA to inclusive terminology
@ 2023-10-16 16:47 Florian Fainelli
2023-10-16 16:47 ` [PATCH net-next v4 2/2] net: dsa: Rename IFLA_DSA_MASTER to IFLA_DSA_CONDUIT Florian Fainelli
[not found] ` <20231016164742.264613-2-florian.fainelli@broadcom.com>
0 siblings, 2 replies; 5+ messages in thread
From: Florian Fainelli @ 2023-10-16 16:47 UTC (permalink / raw)
To: netdev
Cc: Florian Fainelli, Andrew Lunn, Florian Fainelli, Vladimir Oltean,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Broadcom internal kernel review list,
open list:ARM/Mediatek SoC support,
moderated list:ARM/Mediatek SoC support
[-- Attachment #1.1: Type: text/plain, Size: 5472 bytes --]
One of the action items following Netconf'23 is to switch subsystems to
use inclusive terminology. DSA has been making extensive use of the
"master" and "slave" words which are now replaced by "conduit" and
"user" respectively.
Changes in v4:
- added clarification that we used "master" and "slave" terms for a
while
- fixed include guard names in user.h
- fixed some improper subtitutions
- renamed STATE_CHANGE notifier
- added Rob's ack on the DT patches from the first review
Changes in v3:
- properly align arguments with the changed function names
- ensure markup delimiters lengths are corrected to the name word length
- maintain the existing wording about LAG devices
Changes in v2:
- addressed kbuild test robots reports
- preserve capitalization where relevant
- fixed build error in mtk_ppe_offload.c
Florian Fainelli (2):
net: dsa: Use conduit and user terms
net: dsa: Rename IFLA_DSA_MASTER to IFLA_DSA_CONDUIT
.../bindings/net/dsa/mediatek,mt7530.yaml | 2 +-
Documentation/networking/dsa/b53.rst | 14 +-
Documentation/networking/dsa/bcm_sf2.rst | 2 +-
.../networking/dsa/configuration.rst | 102 +-
Documentation/networking/dsa/dsa.rst | 162 +-
Documentation/networking/dsa/lan9303.rst | 2 +-
Documentation/networking/dsa/sja1105.rst | 6 +-
.../dts/marvell/armada-3720-espressobin.dtsi | 2 +-
drivers/net/dsa/b53/b53_common.c | 4 +-
drivers/net/dsa/b53/b53_mdio.c | 2 +-
drivers/net/dsa/bcm_sf2.c | 36 +-
drivers/net/dsa/bcm_sf2.h | 2 +-
drivers/net/dsa/bcm_sf2_cfp.c | 4 +-
drivers/net/dsa/lan9303-core.c | 4 +-
drivers/net/dsa/lantiq_gswip.c | 34 +-
drivers/net/dsa/microchip/ksz9477.c | 6 +-
drivers/net/dsa/microchip/ksz_common.c | 20 +-
drivers/net/dsa/microchip/ksz_ptp.c | 2 +-
drivers/net/dsa/mt7530.c | 16 +-
drivers/net/dsa/mv88e6xxx/chip.c | 2 +-
drivers/net/dsa/ocelot/felix.c | 68 +-
drivers/net/dsa/ocelot/felix.h | 6 +-
drivers/net/dsa/qca/qca8k-8xxx.c | 50 +-
drivers/net/dsa/qca/qca8k-common.c | 2 +-
drivers/net/dsa/qca/qca8k-leds.c | 6 +-
drivers/net/dsa/qca/qca8k.h | 2 +-
drivers/net/dsa/realtek/realtek-smi.c | 28 +-
drivers/net/dsa/realtek/realtek.h | 2 +-
drivers/net/dsa/sja1105/sja1105_main.c | 4 +-
drivers/net/dsa/xrs700x/xrs700x.c | 12 +-
drivers/net/ethernet/broadcom/bcmsysport.c | 2 +-
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
.../net/ethernet/mediatek/mtk_ppe_offload.c | 2 +-
include/linux/dsa/sja1105.h | 2 +-
include/net/dsa.h | 56 +-
include/net/dsa_stubs.h | 22 +-
include/uapi/linux/if_link.h | 4 +-
net/core/dev_ioctl.c | 2 +-
net/dsa/Makefile | 6 +-
net/dsa/{master.c => conduit.c} | 118 +-
net/dsa/conduit.h | 22 +
net/dsa/dsa.c | 224 +--
net/dsa/dsa.h | 12 +-
net/dsa/master.h | 22 -
net/dsa/netlink.c | 22 +-
net/dsa/port.c | 124 +-
net/dsa/port.h | 4 +-
net/dsa/slave.h | 69 -
net/dsa/switch.c | 20 +-
net/dsa/switch.h | 8 +-
net/dsa/tag.c | 10 +-
net/dsa/tag.h | 26 +-
net/dsa/tag_8021q.c | 22 +-
net/dsa/tag_8021q.h | 2 +-
net/dsa/tag_ar9331.c | 4 +-
net/dsa/tag_brcm.c | 14 +-
net/dsa/tag_dsa.c | 6 +-
net/dsa/tag_gswip.c | 4 +-
net/dsa/tag_hellcreek.c | 4 +-
net/dsa/tag_ksz.c | 12 +-
net/dsa/tag_lan9303.c | 4 +-
net/dsa/tag_mtk.c | 4 +-
net/dsa/tag_none.c | 6 +-
net/dsa/tag_ocelot.c | 22 +-
net/dsa/tag_ocelot_8021q.c | 12 +-
net/dsa/tag_qca.c | 6 +-
net/dsa/tag_rtl4_a.c | 6 +-
net/dsa/tag_rtl8_4.c | 6 +-
net/dsa/tag_rzn1_a5psw.c | 4 +-
net/dsa/tag_sja1105.c | 30 +-
net/dsa/tag_trailer.c | 4 +-
net/dsa/tag_xrs700x.c | 4 +-
net/dsa/{slave.c => user.c} | 1464 ++++++++---------
net/dsa/user.h | 69 +
74 files changed, 1549 insertions(+), 1543 deletions(-)
rename net/dsa/{master.c => conduit.c} (76%)
create mode 100644 net/dsa/conduit.h
delete mode 100644 net/dsa/master.h
delete mode 100644 net/dsa/slave.h
rename net/dsa/{slave.c => user.c} (62%)
create mode 100644 net/dsa/user.h
--
2.34.1
[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4221 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH net-next v4 2/2] net: dsa: Rename IFLA_DSA_MASTER to IFLA_DSA_CONDUIT
2023-10-16 16:47 [PATCH net-next v4 0/2] Switch DSA to inclusive terminology Florian Fainelli
@ 2023-10-16 16:47 ` Florian Fainelli
[not found] ` <20231016164742.264613-2-florian.fainelli@broadcom.com>
1 sibling, 0 replies; 5+ messages in thread
From: Florian Fainelli @ 2023-10-16 16:47 UTC (permalink / raw)
To: netdev
Cc: Florian Fainelli, Andrew Lunn, Florian Fainelli, Vladimir Oltean,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Broadcom internal kernel review list,
open list:ARM/Mediatek SoC support,
moderated list:ARM/Mediatek SoC support
[-- Attachment #1.1: Type: text/plain, Size: 3688 bytes --]
This preserves the existing IFLA_DSA_MASTER which is part of the uAPI
and creates an alias named IFLA_DSA_CONDUIT.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
Documentation/networking/dsa/configuration.rst | 4 ++--
include/uapi/linux/if_link.h | 4 +++-
net/dsa/netlink.c | 10 +++++-----
3 files changed, 10 insertions(+), 8 deletions(-)
diff --git a/Documentation/networking/dsa/configuration.rst b/Documentation/networking/dsa/configuration.rst
index e6c9719874b0..6cc4ded3cc23 100644
--- a/Documentation/networking/dsa/configuration.rst
+++ b/Documentation/networking/dsa/configuration.rst
@@ -393,7 +393,7 @@ description which has an ``ethernet`` property. It is up to the user to
configure the system for the switch to use other conduits.
DSA uses the ``rtnl_link_ops`` mechanism (with a "dsa" ``kind``) to allow
-changing the DSA conduit of a user port. The ``IFLA_DSA_MASTER`` u32 netlink
+changing the DSA conduit of a user port. The ``IFLA_DSA_CONDUIT`` u32 netlink
attribute contains the ifindex of the conduit device that handles each user
device. The DSA conduit must be a valid candidate based on firmware node
information, or a LAG interface which contains only slaves which are valid
@@ -435,7 +435,7 @@ Using iproute2, the following manipulations are possible:
dsa master bond0
Notice that in the case of CPU ports under a LAG, the use of the
-``IFLA_DSA_MASTER`` netlink attribute is not strictly needed, but rather, DSA
+``IFLA_DSA_CONDUIT`` netlink attribute is not strictly needed, but rather, DSA
reacts to the ``IFLA_MASTER`` attribute change of its present conduit (``eth0``)
and migrates all user ports to the new upper of ``eth0``, ``bond0``. Similarly,
when ``bond0`` is destroyed using ``RTM_DELLINK``, DSA migrates the user ports
diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
index fac351a93aed..30ef80aff033 100644
--- a/include/uapi/linux/if_link.h
+++ b/include/uapi/linux/if_link.h
@@ -1392,7 +1392,9 @@ enum {
enum {
IFLA_DSA_UNSPEC,
- IFLA_DSA_MASTER,
+ IFLA_DSA_CONDUIT,
+ /* Deprecated, use IFLA_DSA_CONDUIT insted */
+ IFLA_DSA_MASTER = IFLA_DSA_CONDUIT,
__IFLA_DSA_MAX,
};
diff --git a/net/dsa/netlink.c b/net/dsa/netlink.c
index f56f90a25b99..1332e56349e5 100644
--- a/net/dsa/netlink.c
+++ b/net/dsa/netlink.c
@@ -8,7 +8,7 @@
#include "user.h"
static const struct nla_policy dsa_policy[IFLA_DSA_MAX + 1] = {
- [IFLA_DSA_MASTER] = { .type = NLA_U32 },
+ [IFLA_DSA_CONDUIT] = { .type = NLA_U32 },
};
static int dsa_changelink(struct net_device *dev, struct nlattr *tb[],
@@ -20,8 +20,8 @@ static int dsa_changelink(struct net_device *dev, struct nlattr *tb[],
if (!data)
return 0;
- if (data[IFLA_DSA_MASTER]) {
- u32 ifindex = nla_get_u32(data[IFLA_DSA_MASTER]);
+ if (data[IFLA_DSA_CONDUIT]) {
+ u32 ifindex = nla_get_u32(data[IFLA_DSA_CONDUIT]);
struct net_device *conduit;
conduit = __dev_get_by_index(dev_net(dev), ifindex);
@@ -38,7 +38,7 @@ static int dsa_changelink(struct net_device *dev, struct nlattr *tb[],
static size_t dsa_get_size(const struct net_device *dev)
{
- return nla_total_size(sizeof(u32)) + /* IFLA_DSA_MASTER */
+ return nla_total_size(sizeof(u32)) + /* IFLA_DSA_CONDUIT */
0;
}
@@ -46,7 +46,7 @@ static int dsa_fill_info(struct sk_buff *skb, const struct net_device *dev)
{
struct net_device *conduit = dsa_user_to_conduit(dev);
- if (nla_put_u32(skb, IFLA_DSA_MASTER, conduit->ifindex))
+ if (nla_put_u32(skb, IFLA_DSA_CONDUIT, conduit->ifindex))
return -EMSGSIZE;
return 0;
--
2.34.1
[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4221 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH net-next v4 1/2] net: dsa: Use conduit and user terms
[not found] ` <20231016164742.264613-2-florian.fainelli@broadcom.com>
@ 2023-10-16 18:43 ` Stephen Hemminger
2023-10-17 10:03 ` Vladimir Oltean
1 sibling, 0 replies; 5+ messages in thread
From: Stephen Hemminger @ 2023-10-16 18:43 UTC (permalink / raw)
To: Florian Fainelli
Cc: netdev, Andrew Lunn, Florian Fainelli, Vladimir Oltean,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Broadcom internal kernel review list,
open list:ARM/Mediatek SoC support,
moderated list:ARM/Mediatek SoC support
On Mon, 16 Oct 2023 09:47:41 -0700
Florian Fainelli <florian.fainelli@broadcom.com> wrote:
> Use more inclusive terms throughout the DSA subsystem by moving away
> from "master" which is replaced by "conduit" and "slave" which is
> replaced by "user". No functional changes.
>
> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
> ---
> .../bindings/net/dsa/mediatek,mt7530.yaml | 2 +-
> Documentation/networking/dsa/b53.rst | 14 +-
> Documentation/networking/dsa/bcm_sf2.rst | 2 +-
> .../networking/dsa/configuration.rst | 100 +-
> Documentation/networking/dsa/dsa.rst | 162 +-
> Documentation/networking/dsa/lan9303.rst | 2 +-
> Documentation/networking/dsa/sja1105.rst | 6 +-
> .../dts/marvell/armada-3720-espressobin.dtsi | 2 +-
> drivers/net/dsa/b53/b53_common.c | 4 +-
> drivers/net/dsa/b53/b53_mdio.c | 2 +-
> drivers/net/dsa/bcm_sf2.c | 36 +-
> drivers/net/dsa/bcm_sf2.h | 2 +-
> drivers/net/dsa/bcm_sf2_cfp.c | 4 +-
> drivers/net/dsa/lan9303-core.c | 4 +-
> drivers/net/dsa/lantiq_gswip.c | 34 +-
> drivers/net/dsa/microchip/ksz9477.c | 6 +-
> drivers/net/dsa/microchip/ksz_common.c | 20 +-
> drivers/net/dsa/microchip/ksz_ptp.c | 2 +-
> drivers/net/dsa/mt7530.c | 16 +-
> drivers/net/dsa/mv88e6xxx/chip.c | 2 +-
> drivers/net/dsa/ocelot/felix.c | 68 +-
> drivers/net/dsa/ocelot/felix.h | 6 +-
> drivers/net/dsa/qca/qca8k-8xxx.c | 50 +-
> drivers/net/dsa/qca/qca8k-common.c | 2 +-
> drivers/net/dsa/qca/qca8k-leds.c | 6 +-
> drivers/net/dsa/qca/qca8k.h | 2 +-
> drivers/net/dsa/realtek/realtek-smi.c | 28 +-
> drivers/net/dsa/realtek/realtek.h | 2 +-
> drivers/net/dsa/sja1105/sja1105_main.c | 4 +-
> drivers/net/dsa/xrs700x/xrs700x.c | 12 +-
> drivers/net/ethernet/broadcom/bcmsysport.c | 2 +-
> drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
> .../net/ethernet/mediatek/mtk_ppe_offload.c | 2 +-
> include/linux/dsa/sja1105.h | 2 +-
> include/net/dsa.h | 56 +-
> include/net/dsa_stubs.h | 22 +-
> net/core/dev_ioctl.c | 2 +-
> net/dsa/Makefile | 6 +-
> net/dsa/{master.c => conduit.c} | 118 +-
> net/dsa/conduit.h | 22 +
> net/dsa/dsa.c | 224 +--
> net/dsa/dsa.h | 12 +-
> net/dsa/master.h | 22 -
> net/dsa/netlink.c | 14 +-
> net/dsa/port.c | 124 +-
> net/dsa/port.h | 4 +-
> net/dsa/slave.h | 69 -
> net/dsa/switch.c | 20 +-
> net/dsa/switch.h | 8 +-
> net/dsa/tag.c | 10 +-
> net/dsa/tag.h | 26 +-
> net/dsa/tag_8021q.c | 22 +-
> net/dsa/tag_8021q.h | 2 +-
> net/dsa/tag_ar9331.c | 4 +-
> net/dsa/tag_brcm.c | 14 +-
> net/dsa/tag_dsa.c | 6 +-
> net/dsa/tag_gswip.c | 4 +-
> net/dsa/tag_hellcreek.c | 4 +-
> net/dsa/tag_ksz.c | 12 +-
> net/dsa/tag_lan9303.c | 4 +-
> net/dsa/tag_mtk.c | 4 +-
> net/dsa/tag_none.c | 6 +-
> net/dsa/tag_ocelot.c | 22 +-
> net/dsa/tag_ocelot_8021q.c | 12 +-
> net/dsa/tag_qca.c | 6 +-
> net/dsa/tag_rtl4_a.c | 6 +-
> net/dsa/tag_rtl8_4.c | 6 +-
> net/dsa/tag_rzn1_a5psw.c | 4 +-
> net/dsa/tag_sja1105.c | 30 +-
> net/dsa/tag_trailer.c | 4 +-
> net/dsa/tag_xrs700x.c | 4 +-
> net/dsa/{slave.c => user.c} | 1464 ++++++++---------
> net/dsa/user.h | 69 +
> 73 files changed, 1541 insertions(+), 1537 deletions(-)
> rename net/dsa/{master.c => conduit.c} (76%)
> create mode 100644 net/dsa/conduit.h
> delete mode 100644 net/dsa/master.h
> delete mode 100644 net/dsa/slave.h
> rename net/dsa/{slave.c => user.c} (62%)
> create mode 100644 net/dsa/user.h
Thanks for doing this.
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH net-next v4 1/2] net: dsa: Use conduit and user terms
[not found] ` <20231016164742.264613-2-florian.fainelli@broadcom.com>
2023-10-16 18:43 ` [PATCH net-next v4 1/2] net: dsa: Use conduit and user terms Stephen Hemminger
@ 2023-10-17 10:03 ` Vladimir Oltean
2023-10-18 3:16 ` Florian Fainelli
1 sibling, 1 reply; 5+ messages in thread
From: Vladimir Oltean @ 2023-10-17 10:03 UTC (permalink / raw)
To: Florian Fainelli
Cc: netdev, Andrew Lunn, Florian Fainelli, David S. Miller,
Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Broadcom internal kernel review list,
open list:ARM/Mediatek SoC support,
moderated list:ARM/Mediatek SoC support
On Mon, Oct 16, 2023 at 09:47:41AM -0700, Florian Fainelli wrote:
> Use more inclusive terms throughout the DSA subsystem by moving away
> from "master" which is replaced by "conduit" and "slave" which is
> replaced by "user". No functional changes.
>
> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
> ---
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Note that you left the following unconverted:
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index d117e9b1a465..d27c6b70a2f6 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1113,7 +1113,7 @@ mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
u32 val;
/* When a new MTU is set, DSA always set the CPU port's MTU to the
- * largest MTU of the slave ports. Because the switch only has a global
+ * largest MTU of the user ports. Because the switch only has a global
* RX length register, only allowing CPU port here is enough.
*/
if (!dsa_is_cpu_port(ds, port))
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index be2491de173d..42b1acaca33a 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -2486,7 +2486,7 @@ static int mv88e6xxx_port_vlan_add(struct dsa_switch *ds, int port,
else
member = MV88E6XXX_G1_VTU_DATA_MEMBER_TAG_TAGGED;
- /* net/dsa/slave.c will call dsa_port_vlan_add() for the affected port
+ /* net/dsa/user.c will call dsa_port_vlan_add() for the affected port
* and then the CPU port. Do not warn for duplicates for the CPU port.
*/
warn = !dsa_is_cpu_port(ds, port) && !dsa_is_dsa_port(ds, port);
diff --git a/drivers/net/dsa/qca/qca8k-common.c b/drivers/net/dsa/qca/qca8k-common.c
index d203e4a84441..9243eff8918d 100644
--- a/drivers/net/dsa/qca/qca8k-common.c
+++ b/drivers/net/dsa/qca/qca8k-common.c
@@ -761,7 +761,7 @@ int qca8k_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
int ret;
/* We have only have a general MTU setting.
- * DSA always set the CPU port's MTU to the largest MTU of the slave
+ * DSA always set the CPU port's MTU to the largest MTU of the user
* ports.
* Setting MTU just for the CPU port is sufficient to correctly set a
* value for every port.
diff --git a/drivers/net/dsa/realtek/rtl8365mb.c b/drivers/net/dsa/realtek/rtl8365mb.c
index d171c18dd354..0875e4fc9f57 100644
--- a/drivers/net/dsa/realtek/rtl8365mb.c
+++ b/drivers/net/dsa/realtek/rtl8365mb.c
@@ -1144,7 +1144,7 @@ static int rtl8365mb_port_change_mtu(struct dsa_switch *ds, int port,
int frame_size;
/* When a new MTU is set, DSA always sets the CPU port's MTU to the
- * largest MTU of the slave ports. Because the switch only has a global
+ * largest MTU of the user ports. Because the switch only has a global
* RX length register, only allowing CPU port here is enough.
*/
if (!dsa_is_cpu_port(ds, port))
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH net-next v4 1/2] net: dsa: Use conduit and user terms
2023-10-17 10:03 ` Vladimir Oltean
@ 2023-10-18 3:16 ` Florian Fainelli
0 siblings, 0 replies; 5+ messages in thread
From: Florian Fainelli @ 2023-10-18 3:16 UTC (permalink / raw)
To: Vladimir Oltean, Florian Fainelli
Cc: netdev, Andrew Lunn, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Broadcom internal kernel review list,
open list:ARM/Mediatek SoC support,
moderated list:ARM/Mediatek SoC support
On 10/17/2023 3:03 AM, Vladimir Oltean wrote:
> On Mon, Oct 16, 2023 at 09:47:41AM -0700, Florian Fainelli wrote:
>> Use more inclusive terms throughout the DSA subsystem by moving away
>> from "master" which is replaced by "conduit" and "slave" which is
>> replaced by "user". No functional changes.
>>
>> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
>> ---
>
> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
>
> Note that you left the following unconverted:
Bah, thanks, sent a v5 with those additions. Thank you!
--
Florian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2023-10-18 3:17 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-10-16 16:47 [PATCH net-next v4 0/2] Switch DSA to inclusive terminology Florian Fainelli
2023-10-16 16:47 ` [PATCH net-next v4 2/2] net: dsa: Rename IFLA_DSA_MASTER to IFLA_DSA_CONDUIT Florian Fainelli
[not found] ` <20231016164742.264613-2-florian.fainelli@broadcom.com>
2023-10-16 18:43 ` [PATCH net-next v4 1/2] net: dsa: Use conduit and user terms Stephen Hemminger
2023-10-17 10:03 ` Vladimir Oltean
2023-10-18 3:16 ` Florian Fainelli
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).